Description

Rutland 913 Marine Mounting Kit

Rutland’s 913 Marine Mounting Kit is a 2.4m (8ft) pole kit manufactured from stainless steel and supplied in 2 x 1.2 metre sections with joiner. Two L shaped deck fixing plates are supplied to support the pole and attach to the deck along with brackets to which guys or stays should be attached. Solid stays are recommended to provide a suitably rigid mount for the windcharger, these are not included owing to the individual nature of the lengths required on each boat.

Rutland 503/504 Marine Mounting Kit

Rutland’s 503/504 Marine Mounting Kit is a 2m (6.5ft) pole kit manufactured from stainless steel and supplied in 2 x 1metre sections with joiner. Two L shaped deck fixing plates are supplied to support the pole and attach to the deck along with brackets to which guys or stays should be attached. Solid stays are recommended to provide a suitably rigid mount for the windcharger, these are not included owing to the individual nature of the lengths required on each boat.

Want to construct a pole of your own ? A pole can be constructed for deck fixing using a continuous length of stainless steel or Aluminium tube, a minimum 2 metre length is recommended. Note that the mounting tube dimensions must be 31.7mm internal diameter and no more than 38mm outer diameter. Also available are single 1M and 500mm tube sections for you adapt to your own mounting design.