The new MX32 is designed on the same platform as the MX43 and allows the control of both digital and analog channels in a wide variety of gas monitoring applications. The analog channels allow up to two wheatstone bridge gas detectors to be monitored without any additional modules. The MX32’s digital technology allows up to 8 detectors to be distributed on the dual channels using suitable additional modules. The MX32 is SIL1 compliant
Features
Applications
Specifications
General Specifications
| Dimensions: | 265 x 266 x 96mm |
| Ingress protection | IP55 |
| Cable entries:
|
5 M16 cable glands, 4 to 8 mm² (8 to 11 AWG) outer diameter cable 2 M20 cable glands, 6 to 12 mm² (7 to 9 AWG) outer diameter cable |
| Display:
|
LCD back-lit display + smart keys Display in video inverse in case of fault Customizable by user (display 1 to 8 channels simultaneously, fixed or scrolling, on events…) Bar graph with alarm threshold |
| Visual indicators: | 7 LEDs per line, 1 LED fault indicator |
| Buttons: | 5 smart keys, 1 audible alarm accept/reset button |
| Operating Environment: | Temp: -20°C to +50°C, Humidity 5 – 95%RH |
| Power Supply: | 100-240vAC 50-60 Hz (35W) or 22-28vDC, (92W max) |
| Optional Battery: | Embedded back up power supply in option (0.6 Ah) |
| Consumption: | 250 mA max (without module or detector) |
Monitored Channels
| Digital lines:
|
2 maximum RS-485 communication, proprietary protocol, 9600 Baud 2 twisted shielded-pair cable |
| Analog channels:
|
2 maximum (4-20mA or Wheatstone bridge 0-23 mA analog signal input (4 to 20 mA reserved for measurement) 120 Ohm load resistance 2 or 3-core shielded cable |
| Max current output per line: | 0.65 to 1A with internal AC power or 1.5A with external DC power |
| Max current output in total: | 0.65 to 1A with internal AC power or 2 x 1.5A with external DC power |
Alarms
| Per channel:
|
5 alarm levels (A1, A2, A3, Overscale, Underscale) + 1 Fault Catalytic bead over range protection |
| Programmable thresholds: | Instantaneous or averaged values, rising or falling alarms, manual or automatic acknowledgement |
| On-board relays:
|
4 fully programmable alarm relays 1 fault relay (non-configurable) Dry contact relay DPCO relays with contact rating of 250vAC, 2 A (inductive) |
| External relays:
|
Up to 16 fully programmable alarm relays Dry contact relay, DPCO relays with contact rating of 250vAC, 2 A (inductive) |
| Digital outputs: | RS-485 Modbus RTU serial link |
| Analog outputs: | Up to 8 outputs (4-20mA) |
6313962
£370.00
6313963
£405.00
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
