WD-CPS
Condensation Prevention Sensor with 2 metre lead. Output: current mode (dry <3mA, wet >12 mA). VFC mode SPDT contact, 24vAC/DC @ 500mA resistive. Supply voltage: 25vDC 5% or 24vAC 10% Supply current: 12mA max...
WD-CS-2M
Water Leak Detection Cable. PVC Twisted pair cable with 316 stainless steel elements. Cable is 3.5mm diameter with a 3m leader and 2m of sensor cable...
WD-PS
Water Leak Detection Point Sensor. Housed in a robust ABS enclosure, dimensions 58 x 58 x 31mm, with slot lugs for easy installation and stainless steel probes. Unit comes with 2m of cable...
WD-RS
Water Detection Rain Sensor. Housed in a robust ABS enclosure, dimensions 70 x 30 x 45mm, with swivelled mounting bracket. Unit comes with 2m of cable...
WH-2100
WH-2100 watt hour sensor. Range 0-100 Amp, input voltage 208-230VAC ±10%, output 1 pulse per 10 watt hours...
WIMO-LOGGER
The WiMo-Logger is supplied in a robust carry case and included activating magnet and sensor tool...
WindSonic75 Ultrasonic Wind Speed and Direction Sensor
The Windsonic75 Ultrasonic anemometer provides wind speed and direction in the range of 0-75m/s. Readings can be provided as an RS232, RS422, or RS485 Serial or two analogue outputs. The WindSonic75 unit is a robust, lightweight (0.5kg) sensor with a corrosion-free polycarbonate blend housing. The WindSonic75 units are suitable for..
WLM4-230
4 Channel Water Leak Detection Module with built in sounder and changeover relay. Power Supply 230vAC @ 60mA. LED indication for input channels, supply detection and heater activation. Output 230vAC @ 10A Volt-free Changeover Contact. Dimensions: 70 x 60 x 90mm...
WLN-2400-ES-EU
WLN-2400 Series, Ethernet Module for Industrial Wireless Applications. Power supply 9-30vDC, frequency range 2.4GHz with a 100mW transmitter power...
WMO-400S
WMO-400S Series, High Performance Modem for Industrial Wireless Applications. Power supply 11-30vDC, frequency range between 430-490MHz (adjustable +/-10MHz) with a configurable transmitter power from 10-500mW in narrow and wide bandwidths...
WMO-869S
WMO-800S Series, High Speed Modem for Industrial Wireless Applications. Power supply 10-30vDC, frequency range 869.525MHz with a 500mW transmitter power. Single serial port for RS485 or RS232 connections...
WP600
WP600 Series - Standard Industrial Weighing Platform in Mild Steel. Platform dimensions 600 x 600mm. Capacity 0-150Kg up to 0-3,000Kg. Dunbar top plate with a hammer spray paint finish. Fitted with four Shear Beam load cells sealed to IP66..
WPH-N-50
WPH Type Woltmann Helix Hot Water Meter. Pipe diameter 50mm with PN16 flanged connections, flow range: Qmin 0.6 m3/hr; Qn 15m3/hr; Qmax 90m3/hr. Epoxy coated cast Iron body suitable for up to water up to 90 C. Additional pulse output options from 100 to 1,000 Ltr/pulse are available at the..
WPI-SDC-50
WPI-SDC Irrigation Water Flowmeter. Pipe diameter DN50 with standard PN16 flanges. Flow range Q1 3.15m³/h, Q2 5.04m³/h, Q3 63m³/h and Q4 78.75m³/h. IP68 Epoxy Coated Iron body with replaceable copper can mechanism. Additional pulse output options from 0.1 to 1 m³/pulse are available at the time of order. (Please order..
WSERIAL-C
wSerial Wireless Concentrator, provides serial connection to acquire data from wSerial-N remote nodes. Power supply 10-30vDC, operating temperature -5 to +65°C, DIN rail mounting. 1 x RS232/RS485 transparent serial port, supports MODBUS protocol RTU/ASCII. 2.4GHz Zigbee radio communications, maxim range 2Km line of sight. Maximum number of remote nodes -..
WSR GEN II Telemetry System
The WSR GEN II Telemetry System works as a receiver unit for GEN II transmitters to provides an analogue output for inputs to connected GEN II transmitters. The WSR is a self-contained mains powered receiver and output unit with built-in batteries providing 48 hours of operation in the event of..
WSR-8V
GEN II Wireless Sensor Receiver (WSR) unit with 8 input channels and 8 x 0.5V Outputs. Supplied with detachable antenna, built in rechargeable batteries (6 x NiMh AA batteries), MP12U AC power supply, LC-TX3 set-up leads, User Instructions and RxConfig software...
WTUNNEL-2002
wTunnel Transparent Wireless Tunnel Device. Power supply 10-30vDC, operating temperature -5 to +65°C, DIN rail mounting. 1 x RS232/RS485 serial port, 2 Digital Inputs and 2 Digital Outputs. 2.4GHZ Zigbee radio communications, maximum range 2KM line of sight...
XM279C
GSKIN Small Heat Flux Sensor. Heat flux range -150 to +150kW/m², min sensitivity 1.5µV/(W/m²), response time 0.7 secs. Plate sensing area is 4.4 x 4.4mm with a 0.5mm thickness. 1m cable terminated in a TEG connector suitable for attaching to a DLOG logger...
XO677C-TEMP
GSKIN Combined Heat Flux and Temperature Sensor. Heat Flux Range: -15 to +15kW/m², min sensitivity 7µV/(W/m²). Temperature Range: -30 to 70°C, accuracy: ±0.2°C (0-30°C), ±0.4°C (-20 to +60°C). Plate sensing area is 30 x 30mm with a 3.3mm thickness. 1.0m flying lead...
XPD12 Disc Mount Proximity Probe
Senturion Disc Mounted Eddy Current Probe Type XPD12. Low profile disc mounted probe with a tip diameter of 25mm. Measurement range of 0-12mm...
8801801015
WL420 Submersible Hydrostatic Level Transmitter. Depth Range 1mH2O. 2-Wire Loop Powered 4-20mA Output with a 12-36vDC Power Supply. 15m Polyurethane (PUR) Cable with Ventilation Tube. Over-Pressure 300% FS, Burst Pressure 600% FS. Stainless Steel Sensor with 105mm Body Length and 26.5mm Diameter...
CA-05/06
Rutland 505 Wind Turbine. with Horizontal-Axis Wind Turbine (HAWT) Design. Power Output: 3 Watts @ 5m/s, 60 Watts @ 15m/s. Voltage Output: 12V. Cut in Speed: 3m/s, Turbine Diameter: 510mm, Turning Radius: 304mm. Weight: 3.5Kg (net), Supplied with Marlec SMR1 12V Charge Controller and Manual...
HiTemp140-TSK Extreme Temperature Data Loggers
The HiTemp140-TSK Extreme Temperature Data Logger is a rugged, high precision, temperature data logger that is built for use in harsh environments. The stainless steel device is submersible and has an operating temperature range of -40 to +140°C. The logger comes with with a thermal shield allowing short-term temperature range..
