17124975-K
Replacement MX6 Catalytic Sensor for Pentane (C5H12) Range 0 to 100%LEL, Resolution 1%LEL. Response time 10 seconds. This MX6 replacement cell is supplied calibrated for Pentane. Exposure to other flammable gases can create lower than expected readings...
B-513
Logic alarm cable for GL Series data loggers. Provides access to the logic/pulse input, external trigger input, external sampling input, and alarm signal output. Cable is 2m long with flying leads and allows 4 Logic Inputs & 4 Alarm Outputs..
MTN/MM001
¼" - 28 UNF male to 35mm, 2 Pole Type Magnetic adapter. Provides a temporary connection that allows for good everyday machine surveying with a simple, quick magnetic mounting...
NPL-RECAL-5 POINTS
UKAS traceable calibration of customers own pressure sensors. Pressure Calibration to 5 points. All ranges between -0.8 and 1,000 Bar. Certificate shows actual output readings in graph and table form. Maximum errors shown at each point as a percentage. Certificate is timed, dated and has a unique reference for complete..
SWPK-7-USB
Tinytag Explorer Software and download cable starter pack. The SWPK-7-USB starter pack contains a USB download cable, Software CD, with device drivers and a quick start guide. This pack is suitable for use with the all Tinytag Ultra, Plus and View data loggers. The Tinytag Explorer software comes with a..
17124975-L
Replacement MX6 Catalytic Sensor for Methane (CH4) Range 0 to 100%LEL, Resolution 1%LEL. Response time 10 seconds. This MX6 replacement cell is supplied calibrated for Methane. Exposure to some flammable gases can generate higher than expected readings...
17124975-M
Replacement MX6 Catalytic Sensor for Methane (CH4) Range 0 to 5% Volume, Resolution 0.01% Vol. Response time 10 seconds. This MX6 replacement cell is supplied calibrated for Methane. Exposure to other flammable gases can generate higher than expected readings...
17124975-N
Replacement MX6 Infrared Sensor for Methane (CH4) Range 0 to 100% Volume, Resolution 1% Vol. Response time 13 seconds. This MX6 replacement cell is supplied calibrated for Methane. Exposure to other flammable gases can provide higher than expected readings...
17124975-P
Replacement MX6 Infrared Sensor for Hydrocarbons (Propane). Range 0 to 100% Volume, Resolution 1% Vol...
17124975-Q
Replacement MX6 Infrared Sensor for Carbon Dioxide (CO2). Range 0 to 5% Volume, Resolution 0.01% Vol. Response time 10 seconds (T50)..
17124975-R
Replacement MX6 PhotoIonization Detector Sensor for Volatile Organic Compounds. Range 0-2,000 ppm, Resolution 0.1ppm. Response time 15 seconds..
17124975-S
Replacement MX6 Infrared Sensor for Methane (CH4). Range 0 to 100%LEL, Resolution 1%LEL. Response time 10 seconds. This MX6 replacement cell is supplied calibrated for Methane. Exposure to other flammable gases can provide higher than expected readings...
NPL-RECAL-11 POINTS
UKAS traceable calibration of customers own pressure sensors. Pressure Calibration to 11 points. All ranges between -0.8 and 1,000 Bar. Certificate shows actual output readings in graph and table form. Maximum errors shown at each point as a percentage. Certificate is timed, dated and has a unique reference for complete..
97RA
6 digit LED display, AC frequency input for flow rate, suitable for displaying flow rate from turbine meters with AC output. Frequncy range 1-10,000 Hz, accuracy 0.05% of reading, power supply 8-13v DC, operating temperature 0-50 deg C, dimensions 96 x 48 x 104mm deep...
CAL3AXISROTATE
Calibration 3 Axis - Rotate (Wind Tunnel). The calibration procedure involves a fixed wind velocity and the unit is rotated from 0 to 360 Degrees in 180 separate steps, providing a reading every 2 Degrees. The calibration certificate then compares the fixed wind velocity of the wind tunnel to the..
CDI-PSO
CDI-PSO Pressure Sensing Option for the CDI compressed air flow meters. Range 0-145 PSIg (0-10 BarG). Output 4-20mA. Only available one new meters and not available as a retrofit to existing meters...
E3-02A
2m White extension cable for HC2 Probe with connector...
GS-61
Transmitters for use with external probes - Wired sockets for 8 x state indications (e.g. door open/close)..
LEO2-CALIBRATION-UKAS
Calibration of Leo 1 & Leo 2 manometers calibrated in accordance with ISO/IEC 17025:2005 by UKAS accredited calibration laboratories..
SWCD-0040-ENG
Tinytag Explorer software with English quick start guide. This software will guide you through setting up your Tinytag data loggers and can provide a printout of your settings for verification. It will also help you explore the more advanced features available. The Tinytag software comes with a site licence allowing..
E3-05A
5m White extension cable for HC2 Probe with connector...
SWCD-0040-INT
Tinytag Explorer Software CD with English, French, German, Italian, Spanish and Swedish quick start guide. This software will guide you through setting up your Tinytag data loggers and can provide a printout of your settings for verification. It will also help you explore the more advanced features available. The Tinytag..
E3-02XX
2m White extension cable for HC2 Probe with flying leads..
GS-62
Transmitters for use with external probes - Wired sockets for 2 x pulse inputs (voltage-free or digital)..
