N322T
Digital thermostat for heating and refrigeration purposes with timer support. It has PT1000, thermistor NTC, PTC or J Type Thermocouples inputs. Sensor input: PT100 (-50 to 300 C), PT1000 (-200 to 530 C), J Type Thermocouple (0 to 600 C) (J, K or T Types available) or thermistor (-50 to..
N480D Temperature Controller
N480D Series PID Temperature Controller suitable for Thermocouples and PT100 RTD. Output options of SPST, SPDT Relays, 4-20mA and logic pulse. Dimensions 48 x 48 x 110mm, operating temperature 0 to 55 C. Optional 24vDC Power Supply...
ND-350
ND-350 Multifunction power meter for three phase supplies with ModBus RS485 output. Accuracy: Class 0.1 IEC60688. Current input available up to 1,000A via external CT's with 5A output. Dimensions: 106 x 90 x 58mm (DIN rail mounting). LCD display can show all values using button panel...
NEMOD4-DC4200H
Nemo D4-DC Multi-Function Power Meter. Suitable for DC power monitoring, 10-300vDC and up to 10A with direct connections, higher available with suitable adapters and DC current shunts. LCD display, RS485 Modbus Communications, pulse output and 2 relay outputs. Auxiliary Supply 20-150vDC...
NS500/063
NS 500/063 Pelton Wheel Flowmeter. 316/431 Wetted parts (PTFE or Viton oring). End connections 3/4 inch BSP. Pressure rating 345 bar. Calibrated over the range of 0.18-1.8 l/min. For use on Water. Standard pick-up coil & connector. Fitted with welded boss for potting...
NT Series Stainless Steel Turbine Flowmeter
NT turbine flowmeter, all stainless steel body and wetted parts. Accuracy 0.5% FSD. Standard operating temperature -30 to +150 deg C. With AC sine wave frequency output...
NT Series Subsea Flow Meters
NT turbine flowmeter, all stainless steel body and wetted parts. Sizes 1/2 to 6 inch with ANSI flanges or BSP threads. Flow ranges 0.5-5 ltrs/min to 1000 to 10,000 ltrs/min. Accuracy 0.5% FSD. Standard operating temperature -30 to +150 deg C. With AC sine wave frequency output..
NT Stainless Steel Turbine Flow Meters for clean liquids
Stainless steel turbine flow meters for liquids, Pipe sizes 1/4 to 6 with BSP threaded end connections or ANSI flanges, operating pressures up to 5,000 PSI, 350 bar. Flow ranges from 0.5 - 5 ltrs/min to 1000 - 10000 ltrs/min. Options: Eexia, digital indicators, subsea operation, high operating temperature up..
OBBS Load Cell
OBBS Bending Beam - Compression Load Cell. Ranges 5Kg to 500Kg, Output 2mV/V, accuracy 0.03%. OBBS load cell is a stainless steel construction with an IP67 rating...
OEM Compass
A range of OEM Compasses for manufacturers of equipment which require a fully-interfaced heading derived from the Earth s magnetic field. The A4020 includes auto-calibration and comes in a fixed or floating core to a maximum of 35 or 45°...
OHU-1000
OHU-1000 Hammer Union Pressure Sensor, 1000 bar range, 4-20mA output, Accuracy ≤0.2% Full Scale, Operating Temperature -40 to 125°C, 1502 Fitting..
OLC(T) 100 Explosive, Toxic gases or Oxygen Detector.
Fixed gas detectors designed for explosive gases, toxic gases and Oxygen. Housing is an Epoxy-coated aluminium with 316 stainless steel sensors rated to IP66. Option of Wheatstone Bridge or 4-20mA outputs and a large range of gases...
OLCT10-204
OLCT10 Fixed Gas Detector for Carbon Monoxide (CO). Range 0-300ppm. Output 4-20mA. Power supply 15-30vDC, consumption 30mA max. Operating temperature -20 to +55°C. Life span >24 months. Response time less than 30 second (T90). Plastic housing, 118 x 126 x 63mm, IP65...
OLCT100 Fixed Gas Detector
Designed for the detection of explosive gases, toxic gases or oxygen, this detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). These detectors are ATEX approved and available in explosion safe or intrinsically safe versions. In addition, infrared sensors are also available for more severe..
OLCT10N-001
OLCT10N Fixed Digital Gas Detector for Methane (CH4), Range 0-5% Volume, Accuracy ±1%LEL. Output: RS485 Modbus RTU. Power Supply: 12-30vDC, Consumption 50mA typ. Operating temperature: -20 to +55°C. Life span: 48 Months. Plastic housing, 118 x 157 x 60mm, IP65. Certified to use in ATEX II 3GD zone...
OLCT60 Fixed Gas Detectors
Fixed gas detectors designed for explosive gases, toxic gases and Oxygen with a digital display and 4-20mA output. Housing is an Epoxy-coated aluminium with 316 stainless steel sensors rated to IP66...
OMC-160-3
OMC-160-3 sensor for wind speed and direction. Wind speed 0.3-75m/s, accuracy 2%, wind direction 0-359°, accuracy better than 3 degrees. Output NMEA0183, Operating temperature -55 to +750°C. Input voltage 8-30vDC, 60mA typical @ 12vDC Stainless steel external parts. Non contact measurement system. CAA approved. NATO stock no: 6660-17-112-7536...
OMEGA-WE-SDC50
OMEGA Helix Woltmann Type Bulk Water Meter. Pipe diameter 50mm with PN16 flanged connections, flow range: Qmin 500 l/hr; Qn 40m3/hr; Qmax 50m3/hr. Epoxy coated cast Iron body suitable for up to water up to 30°C with WRAS Approval. All OMEGA Flow meters come prepared for a pulse output of..
OMK-610-HS
OMK610 Squirrel oven data logger system. Maximum of 100 minutes at 250C. Complete kit consisting of OQ610 Squirrel data logger. Complete with TB610 HS thermal barrier, TBHS-1 heat sink, USB connection cable, light weight carry case, getting started guide and Paintview configuration and data analysis software. Probes are not include..
OMNI-ECO-200M
OMNI-ECO-200M DIN Rail Mounted Modular Ultrasonic Flowmeter. DIN rail mount IP54 housing with display showing instantaneous flow rate, accumulated flow, velocity, time, analogue inputs, etc. Outputs: RS485 Modbus Slave, 4-20mA, OCT and relay outputs. Power supply 9 to 36vDC or 10 to 36vAC. Transducers available separately...
OMNI-MC-7821
MC-7821G Grain Moisture & Temperature Meter with insertion probe measurement. Moisture Range: 8-20% and Temperature Range: -10 to +55°C. Power Supply 4 x 1.5V AA Batteries. Dimensions: 178 x 68 x 39mm...
OMNI-TDI-200H-KIT
OMNI-TDI-200H Portable, Ultrasonic, Non-invasive, Clamp-on Flow Meter. Built-in datalogger for over 2,000 lines of data. Power Supply: Built-in rechargeable battery. Mains adaptor 110-240vAC. Output: RS232. Supplied with TDI-S1 (for pipe diameter 15-100mm), TDI-M1 (50-700mm) and TDI-L1 transducers (300-6000mm), operating temperature range 0-90°C. Kit also come complete with: transducer mountings, tape..
OMNI-TUF-200F-1-5-ADAR
OMNI-TUF-200F Wall Mount Ultrasonic Flowmeter supplied with Small (S1) transducers for pipe sizes 1 inch (DN30) to 4 inch (DN100), complete with 5 metres of shielded cable. Outputs, RS232, 4-20mA for flow rate and Pulse for flow total. Power supply 8-36vDC and 240vAC...
OQ610
OQ610 Squirrel data logger for use with up to 6 K or T type probes, memory size 260,000 readings. Supplied complete with the Getting Started guide, PaintView configuration and analysis software and USB connecting cable...
