SSE232-2232-ST
Transparent Serial Server. 2 x RS232 and 2 x RS485 ports. 3 Digital Inputs and 2 Digital Outputs. Suitable for standard applications...
SSE232-3132-ST
Transparent Serial Server. 3 x RS232 and a single RS485 ports. 3 Digital Inputs and 2 Digital Outputs. Suitable for standard applications...
SSE232-4032-ST
Transparent Serial Server. 4 x RS232 ports. 3 Digital Inputs and 2 Digital Outputs. Suitable for standard applications...
SSE232-ST
SSE232-ST Ethernet Communications device with configurable ports and Digital Input/Output options. Suitable for standard applications. Power supply 9-26vAC or 9-30vDC...
LOADBUTM24X2.0
Load Buttons are used to align extraneous forces through the principle axis of a load cell. Stainless Steel construction: Dimensions: 26mm Diameter, 14mm Button and M24 x 2.0 Male Right-hand Thread, 26mm thread length...
ST1711-50
Standard Shielded Round Cable. 78-pin SUB-D male connector / 50-pin SUB-D male connector, twisted-pair conductors. 2m cable length...
ST1711-50-37
Standard Shielded Round Cable. 78-pin SUB-D male connector to Y-split 50-pin SUB-D male & 37-pin SUB-D male connectors, twisted-pair conductors. 2m cable length...
STALC SS Series Submersible Loadcell
The STALCSS Series loadcell is a pressure compensated tension and compression loadcell suitable for use at up to 6,400m depth. Actual design and cable connections vary depending on depth and specific requirements...
STALCSS Series Submersible Loadcell
Submersible Tri-Axial Load Cell (STALC) suitable for subsea installation up to 6,400m with standard ranges from 2,000Kg to 25 Tonnes and 2.3mV/V output. Operating temperature -20 to 80 C..
Steel Wall Mount Enclosures
Steel wall mounted enclosure provide an IP66 protective enclosure for equipment from environmental conditions and external damage. Enclosures are available in a wide range of sizes and styles suitable for wide range of applications. Omni Instruments can also customise your enclosures by fitting it with Hirschmann connectors, cable glands, internal..
Submersible HS-420 Series
HS-420 Series Waterproof Vibration Sensor. Output 4-20mA for RMS Velocity (mm/s). Velocity ranges between 0-10mm/s and 0-100mm/sec. Unit comes fitted with a 5m blue silicon screened cable as standard (up to 100m available on request) and various mounting options...
Submersible HS-421 Series
HS-421 Series Waterproof Vibration Sensor. Output 4-20mA for RMS Velocity (mm/s) and AC output for acceleration (g). Velocity ranges between 0-10mm/s and 0-100mm/sec, AC sensitivity 50mV/g or 100mV/g. Unit comes fitted with a 5m blue silicon screened cable as standard (up to 100m available on request) and various mounting options...
Submersible HS-422 Series
HS-422 Series Waterproof Vibration Sensor. Output 4-20mA for RMS Acceleration (g). Acceleration ranges between 0-1g RMS and 0-100g RMS. Unit comes fitted with a 5m blue silicon screened cable as standard (up to 100m available on request) and various mounting options...
Submersible Tri-Axial Load Cell (STALC)
Submersible Tri-Axial Load Cell (STALC). Ranges from 1kN to 50kN, output 2mV, Stainless Steel construction with 3M of 4 Core Screened cable...
Subsea Acceleration and Vibration Logger
This product consists of a triple axis accelerometer and battery powered data logger fitted in a subsea stainless steel housing. Housings are available for depth from 200 metres to 4000 metres. The accelerometer measures x, y, and z acceleration in the range of ±15g, with a sample rate of up..
Subsea Aluminium Housings for Water Depths up to 300 metres
Subsea aluminium housings for instrumentation and data loggers, suitable for immersion up to 300 metres of sea water, sizes 100mm and 160mm nominal bore with internal lengths from 100mm to 700mm. Options are available for one end cap to have a clear window suitable for viewing a display or a..
Subsea Cable Assemblies
Omni instruments can supply subsea cable assemblies fitted with Subcon compatible inline connectors made to your requirements for cable length and connector type..
AMMONIUM-SENSOR
Ammonium Sensor suitable for use with WiMo Loggers and WiSens units. Max Depth 15m...
CRUDE-OIL-SENSOR
Crude Oil Sensor suitable for use with WiMo Loggers and WiSens units...
CT-SENSOR-FW
Conductivity and Temperature Sensor optimised for use with fresh water. Suitable for use with WiMo Loggers and WiSens units...
CT-SENSOR-SW
Conductivity and Temperature Sensor optimised for use with sea water. Suitable for use with WiMo Loggers and WiSens units...
DO-SENSOR
Dissolved Oxygen Sensor suitable for use with WiMo Loggers and WiSens units...
ORP-SENSOR
Redox/ORP Sensor suitable for use with WiMo Loggers and WiSens units. Max Depth 15m..
PH-SENSOR
pH Sensor suitable for use with WiMo Loggers and WiSens units. Max depth: 50m at fixed point, 100m in profile (Max 30 min)..
