GS-44
GEN II radio transmitter with wired connections for up to 4 voltage/current inputs. Selectable ranges 0-100mV, 0-1vDC, 0-10vDC, 0-20mA, 4-20mA plus EU scaling configured using DARCA software. The GS-44 can also provide a 5 or 12V sensor supply. Supplied with 4 x AA Alkaline batteries and stub antenna...
HC2A-SH
High Accuracy Standard Temperature and Relative Humidity Probe with UKAS Calibration. Temperature Range: -50 to +100°C and Humidity 0-100%. Accuracy: ±0.1°C and ±0.5%RH, adjustments at 23 °C and 10, 20, 30, 40, 50, 60, 70, 80, 90 %RH. Outputs: 0-1V. Comes with a black Polycarbonate housing and a Polyethylene (40µm)..
LEO-CASE
Soft carry case for LEO digital manometers and loggers..
LFT/IS
Intrinsically safe pick-up option. Suitable for Hazardous Installations ( Eex ia IIC T4 ) ...
MCIL5M-INLINE-MOULD
To mould inline MCIL3M 5 pin male miniature subcon connector to an existing cable This item isn't available to purchase online but is normally held in stock. You can contact us directly to check availability and pricing. info@omni.uk.com..
MIEX64122
MiniAir 64EX Mini vane anemometer. Sensing head 22mm diameter x 28mm, probe length 175mm. Air velocity range 0-20m/s with a 4-20mA output. Accuracy ±1% of full scale, ±3% of reading. Power supply 9-24vDC Sensor is supplied with 20m cable to zener barrier housing. Operating range -10 to +80°C. Plastic sensing..
MPM4730[0-10MPA]-E-R4-22-M12-C2-G
MPM4730 Programmable Pressure Transmitter with 0-100 Bar basic range. 2 Wire, 4-20mA output plus RS485 serial comms. 4 Pin M12 electrical connection with ¼" BSP process connection. Programmed pressure range available from 0-20 Bar up to 0-100 Bar...
MTN/MH008
3-Pin 62GB Mating Connector for MTN Series Sensor. Extremely robust and waterproof to IP66, bayonet fitting...
PB-6005-1M5
Standard PT100 Temperature Probe with moulded handle and connector (IP68 rated) for use with the TGP-4104 and TV-4104 data logger. The stainless steel probe is 150mm long and 5mm in diameter with a 1.5m cable. Temperature range -50 to 300°C with a 25 second response time in water...
PTM-3010
RTD (PT100, PT1000) Input Module for RTR505B(L), TR55i-PT and RTR505-PT(L) Remote Units. Compatible Sensors: PT100, PT1000 (3-wire or 4-Wire, 4th wire unused). Sensor connects using a 3 Terminal screw clamp terminal block. Measurement Range: -200 to +500°C (within the sensor heat-durability range only). Resolution: ±0.1°C. Accuracy: -40 to 10°C: ±0.5°C..
RODENDM8X1.25
Rod End Bearing to align extraneous forces through the principle axis of a load cell. M8 x 1.25 Male Right-hand Thread Construction: Hard Chromium/PTFE composite/Elgoglide sliding contact surface, with Zinc plating for corrosion resistance. Rod Eye 8mm diameter. Designation: GAR8 UK..
SC200A
SC200A Split core, self powered, AC current sensor. Current range 0-200 Amps, output 0-5vDC. Accuracy ±1% of reading from 10% to 100% of full scale. Dimensions 3.3" x 3.0" x 1.25" with a 1" square window and 8ft signal cable. Operating temperature -20 to +55°C...
TEE
Tee Piece Air Pressure (Pack of 10) for PA-DPS units...
Tinytag PB-6005 PT100 Probe
Tinytag General Purpose PT100 Temperature Probe with moulded handle and connector (IP68 rated) for use with the TGP-4104 and TV-4104 data logger. The stainless steel probe is 150mm long and 5mm in diameter with a 1.5m cable. Temperature range -50 to 300°C with a 25 second response time in water...
Tinytag PB-7002 PT1000 Probe
Tinytag Cyrogenic PT1000 Temperature Probe with moulded handle and connector (IP68 rated) for use with the TGP-4205 and TV-4204 data logger. The stainless steel probe is 150mm long and 5mm in diameter with a 1.5m or 3.0m cable. Temperature range -200 to +100°C with a 15 second response time in..
UA-MB30-SS
303 Stainless Steel straight mounting bracket for the ToughSonic 14 and TSPC-30S2 ultrasonic level sensors...
WP-40TH
WP-40TH Sample Holder with a water jacket for temperature control. Sample Holder is a brass, nickel-plated and is 112mm in diameter with an external depth of 95mm...
MPM4730[0-1MPA]-E-R4-22-M12-C2-G
MPM4730 Programmable Pressure Transmitter with 0-10 Bar basic range. 2 Wire, 4-20mA output plus RS485 serial comms. 4 Pin M12 electrical connection with ¼" BSP process connection. Programmed pressure range available from 0-2 Bar up to 0-10 Bar...
MRU Motion Reference Unit
Designed to meet off shore marine and hydrographic requirements, the MRU series offers accurate Pitch & Roll, Heave, Sway, Surge, Accelerations, Angular rates, Heading, Velocity and Positions from a compact, cost effective sensor. Heave accuracy is 5% or 5cm, while pitch & roll is just 0.03° after post processing. Outputs..
1416-PK-013
WindUltra 8-Pin M12 Connector with 10m of cable. Suitable for connecting the WindUltra sensor to Power and Serial Output...
17131038-5
Replacement Extended Range Li-ion Battery Pack for MX6 gas detector, MSHA/AUS Certified battery pack...
1957-PK-153
Maximet Marine 8-Pin M12 Connector with 10m of cable. Suitable for the GMX560 Weather Station for Power and Serial Communications...
5200-07C-BR
Set of two blocking rings for resealing pipework when flow meters are removed. Suitable for CDI-5200-07C flow meters..
