HPS120-KIT
Wireless RS232 transceiver, 2.4Ghz Frequency, 9pin connector, 100mW, 1.2 ~ 115.2Kbps transmission speed, 300m range dipole antenna. Kit includes 2 transceiver units, 2 antennas and USB power cable...
HRS Charge Controller
The HRS Regulator incorporates electronic Pulse Width Modulation (PWM) technology to regulate battery voltage to prevent overcharge. This generation of voltage regulation includes speed limiting to the turbine when the battery is full, which increases the lifetime of the windcharger. The HRS503 is designed for use with the Rutland 504..
HS 500 Series – Protection System
HS 510 Series Single Channel Display Trip Module Input 4-20mA accelerometer (HS-420 Series), Temperature. Output Pre-programmable, 2 trips, retransmit 4-20mA and 0-10 Volts. Start up Protection...
HS-100
100 Series ,100mV/g output, 5m ETFE cable, 1/4 inch -28 UNF Female/Male mounting..
HS-100 Series – General Purpose AC Accelerometer
A range of General Purpose AC Accelerometer suitable for vibration monitoring. This HS-100 series of accelerometers come with a variety of top, or side, entry connections with a range of mV sensitivity outputs. The units have a selection of connections and cable (including submersible and fire retardant) with a variety..
HS-100 Series – Submersible Accelerometer
100 Series ,100mV/g output, 5m ETFE cable, -28 UNF Female mounting..
HS-100T
HS-100T Series, side exit, 100mV/g output, 2 Pin MS Connector, -28 UNF Male mounting..
HS-105 High Temperature Accelerometer
105 Series, 50pC/g output, High Temperature rated to 150?C low noise FEP 5m , fitted with in-line Charge Amplifier to give 100mV/g output and 5 m ETFE cable other side of bullet, -28 UNF Female mounting..
HS-170 Series – Top-Entry Premium Compact Accelerometer
HS-170 Premium Compact Accelerometers with Top Entry Connection. Available with 5m Braided ETFE or Fire Retardant cables or 2-pin MS or 4-pin M12 Connectors. Available with 1/4-28UNF male/female, M6, M8, M10, M12 male or quick-fit female mounting threads. Bias voltage 10-12vDC, current range 0.5 to 8mA. Max shock 5000g...
HS-510
Input - 4-20mA accelerometer (HS-420 Series) Temperature and Output - Pre-programmable, 2 trips, re-transmit 4-20mA and 0-10 Volts...
HS-556
The HS-556 Signal Conditioner is used with a 100mV/g constant current type accelerometer and provides a 4-20mA output suitable for direct input to a vibration monitoring PLC. The 4-20mA output is proportional to true RMS velocity in mm/s. A buffered AC output is provided via a BNC connector to enable..
HS-620A
HS-620 Series vibration meter kit. The kit consists of a vibration meter, hand-held probe, cable, magnetic mount, UK mains charger, in-car charger, protective carry case and instruction manual...
HS-Code
HygroSoft Software. Free Website download. Compatible with all Rotronic products with USB and UART interface...
HT1B/HT2B
HT1B/HT2B DC Current Transformers/Transducers with 35/80mm apertures. Output 0/4-20mA or 0-10vDC, proportional to measured current from 0 to 1000A DC...
HygroLab – Laboratory Device for Water Activity Measurements
The HygroLab is an innovative high-end laboratory analyzer for water activity measurements with up to four measurement probe inputs. Simultaneous or asynchronous measurement with the tried-and-tested AW Quick measuring function for pharmaceutical products, tobacco, coffee, food and many more. The HygroLab has a modern touch screen interface for clear and..
HYGROLAB-SET-40
HygroLab Starter Kit. Starter Kit consists of one HygroLab Device (including power adapter and software), HC2-AW probe, WP-40 sample holder, PS-14 (100 Pack), Humidity Standards (1 Pack of EA35-SCS, EA80-SCS, EA50-SCS and EA10-SCS and AC1124 Carry Case...
HygroLog xL-1D Data Logger
These HygroLog data loggers are a low cost solution suitable for relative humidity, temperature and barometric pressure logging. These loggers include the options for integrated temperature, humidity and/or barometric pressure sensors with a clear LCD display with visual alerts. The units have an internal memory for up to 64,000 readings..
HygroPalm 31 & 32
The HygroPalm 3 series are handheld instruments with an integrated or interchangeable probe. The HP31 has an integrated probe, whilst the HP32 is compatible with all HC2A and HC2 Rotronic probes. The interchangeable probe of the HygroPalm 32 allows for a much more flexible device with a large range of..
I1-GW-1
Smappee Genius Gateway with Wi-Fi & Ethernet Connectivity, up to 48 hours of memory storage...
ICA Series – Signal Amplifiers
In-cell/Miniature Analogue Signal Amplifiers for use with strain gauges and load cells. Available for in-line signal amplification mounted in-cell or in a glanded enclosure...
IDGM-G6P
G6P diaphragm gas meter, MID approved, range 0.06-10M3/Hr, 1" connection, with pulse output...
Industrial Series Linear Velocity Displacement Transducers
The Industrial Series of Linear Velocity Displacement Transducers (LVDT) are suitable for severe factory and processing environments with a higher protection level available than with the economy series. Measuring ranges are available from 0.5mm up to 550mm with various output options and 0.5% accuracy (0.25% also available). Sensor can be..
INT 4 Digital Panel Meters
Intuitive 4 Digital Panel Meter. 5 or 6 digit display. Various input, output and alarm options, plus red or green display colours. Power Supply 11-30vDC or 100-240vAC Options. Panel cut-out dimensions 92 x 45mm with 125mm behind panel depth (including cables). Total weight 350g...
IPRO601
GasBadge Pro Personal Single Gas Monitor for Carbon Monoxide (CO). Range 0-1,500 ppm in 1ppm increments. 1 Year continuous data logging, plus event logging for last 15 alarm events. Backlit LCD display. Ultra-bright LED, vibrating and audible (95dB) alarms with STEL and TWA and selectable low and high alarm levels...
