95.0274
MiniAir20 Mini Steel vane anemometer. Air velocity range 0.7-20m/s with accuracy ±1.0% of full scale, ±2.0% of reading. Sensing head 22mm diameter x 28mm, probe length 182mm. The unit is supplied with 2.4m cable from the probe to the measuring transducer and a 1.5m cable from this to the display...
A2100/03
125mm Mini Tripod Stand for VLS Optical Speed Sensors. Requires an additional MVLS-BR1 or MVLS-BR2 Bracket to mount the MiniVLS Speed Sensors..
95.0000
MiniAir20 Mini Steel vane anemometer. Air velocity range 0.8-40m/s with accuracy ±1.0% of full scale, ±2.0% of reading. Sensing head 22mm diameter x 28mm, probe length 182mm. The unit is supplied with 2.4m cable from the probe to the measuring transducer and a 1.5m cable from this to the display...
HL-20
HygroLog HL-20 datalogger with an integrated temperature and humidity sensors. HL-20 will log up to 20,000 paired readings with adjustable log intervals and two recording modes. Measuring range: -10 to +60 C & 0 to 100%RH. Accuracy: +/-0.2 C & +/-0.8%RH. HL-20 is powered by 3 x AA batteries and..
HL-20-SET
HygroLog HL-20-SET datalogger with an integrated temperature and humidity sensors. HL-20 will log up to 20,000 paired readings with adjustable log intervals and two recording modes. Measuring range: -10 to +60 C & 0 to 100%RH. Accuracy: +/-0.2 C & +/-0.8%RH. HL-20 is powered by 3 x AA batteries and..
HLP22BP
500ml Hydraulic Oil suitable for HPX high pressure calibrator...
HMI-CONFIG
Software and Programming of HMI display to show wind speed and direction data from Windsonic or Windobserver solid state wind sensors. With programmable pop up alarm windows...
HMI5043L
HMI5043L graphic HMI 4.3 inch TFT colour touchscreen display. 2 serial ports (1 RS232/485 2 or 4 wire & 1 RS485 2 wire), Ethernet (RJ45) and 1 x USB. Power supply 24vDC@300mA, IP65 front panel. Fully programmable with graphic indicators, dials, bar graphs and process symbols, pop up alarms etc...
HMI5043T
HMI5043T graphic HMI 4.3 inch TFT colour touchscreen display. 2 serial ports, Ethernet, RS232 and RS485, power supply 24vDc@250mA, IP65 front panel. Fully programmable with graphic indicators, dials, bar graphs and process symbols, pop up alarms etc. 480 x 272 pixel resolution. 128MB flash memory, 64MB DRAM. Can act as..
HP-HOLSTER
Leather holster for HygroPalm handhelds instruments...
HPS-120
Single HPS-120 Wireless RS232 transceiver, 2.4Ghz Frequency, 9pin connecter, 100mW, 1.2 ~ 115.2Kbps transmission speed, 500m range dipole antenna..
HPU-120-KIT1
Wireless USB to RS232 Kit with 500m Dipole Antennas, single USB multi-point transreceiver and a single RS232 transceiver, software and USB lead...
HRN-33
AC voltage monitoring relay, adjustable set point 167-276 VAC for high or low voltage, adjustable time delay up to 10 seconds. Single pole changeover contact. DIN rail mount. Discontinued Product..
HS-100S
HS-100S Series, side exit, 100mV/g output, 2 Pin MS Connector, 1/4 inch -28 UNF Male mounting..
HS-420 Series Accelerometer
HS-420 Series Vibration Sensor. Output 4-20mA for RMS Velocity (mm/s). Velocity ranges between 0-10mm/s and 0-100mm/sec. Unit comes fitted with connectors of 5m cable as standard (up to 100m available on request) and various mounting options...
HS-420T Series – Dual Accelerometers & Temperature Outputs
A range of dual output accelerometers with a separate temperature output. suitable for vibration monitoring. The HS-420 series measure vibration as a velocity in mm/s with a 4-20mA output. HS-422 series measure the vibration as an acceleration in units of g with a 4-20mA output. Both units has a separate..
HS-AC010-10
10m Screened PUR cable with M12, 4-Pole, Straight female connector. Suitable for HS-420 series accelerometers..
HS-AC010-15
15m Screened PUR cable with M12, 4-Pole, Straight female connector. Suitable for HS-420 series accelerometers..
HS-AC010-20
20m Screened PUR cable with M12, 4-Pole, Straight female connector. Suitable for HS-420 series accelerometers..
HS-AC010-5
5m Screened PUR cable with M12, 4-Pole, Straight female connector. Suitable for HS-420 series accelerometers..
HS-AC011-10
10m Screened PUR cable with M12, 4-Pole, Right-angled female connector. Suitable for HS-420 series accelerometers..
HS-AC011-15
15m Screened PUR cable with M12, 4-Pole, Right-angled female connector. Suitable for HS-420 series accelerometers..
HS-AC011-20
20m Screened PUR cable with M12, 4-Pole, Right-angled female connector. Suitable for HS-420 series accelerometers..
HS-AC011-5
5m Screened PUR cable with M12, 4-Pole, Right-angled female connector. Suitable for HS-420 series accelerometers..
