HF3 Series Transmitter
HF3 Series Transmitter...
HF5 Series Transmitters
HF5 Series Temperature & Humidity Transmitters...
HF5-EX Series Transmitter
HF5-EX series transmitter for use with interchangeable HC2-EX probes. Suitable for monitoring temperature, relative humidity and calculated psychrometric values in EX zones with a monitored temperature range of -40 to +60°C. Power supply 10-28vDC. 2 x 4-20mA outputs. Optional LCD display...
HiTemp140 High Temperature Data Loggers
The HiTemp140 High Temperature Data Logger is a rugged, high precision, temperature data logger that is built for use in harsh environments. The stainless steel device is submersible and has an operating temperature range of -40 to +140°C. The logger can be used with a thermal shield to provide a..
HITEMP140-1
Submersible Datalogger with a low profile 316 stainless steel enclosure. Temperature Range: -40 to +150°C from a 100 ohms Platinum RTD with a resolution of 0.01°C. Internal Memory 65,536 readings, sample rate 1 second up to 24 hours and 2 year battery life. Operating Environment -40 to +140°C, 0 to..
HITEMP140-PT-1
Submersible Datalogger with a 24 inch Flexible Probe in a low profile 316 stainless steel enclosure. Temperature Range: -200 to +260 C from a 100 ohms Platinum RTD with a resolution of 0.01 C. Internal Memory 32,700, sample rate 1 second up to 24 hours and 1 year battery life...
HL-20D-SET1
HygroLog HL-20D-SET Data Logger with an integrated temperature and humidity sensors and LCD. HL-20D will log up to 20,000 paired readings with adjustable log intervals and two recording modes. Measuring range: 0 to +50°C & 0 to 100%RH. Accuracy: ±0.3°C & ±0.8%RH. HL-20D is powered by 3 x AA batteries..
Horizonal Float Switches
The FLCS-01 Horizonal Float Switch is a digital output device optimised for straight forward liquid level detection in remote monitoring systems. Designed for horizontal side-entry installation, its polypropylene float and acetal housing with EPDM sealing ensure durability. The sensor provides a basic change of state via a reed switch, which..
HP-GTS
HygroPalm GTS handheld relative humidity and temperature instrument with strong, lightweight Aluminium sword probe. Measuring range 0-100% RH & -0 to 60°C. Internal Logger suitable for 8 x 8,000 data points with logging intervals of 1 second to 24 hours. Rechargeable 3.7V Lithium Polymer Battery, capacity 1,000mAh. Dimensions 408 x..
HP23-A
HygroPalm 23 handheld relative humidity and temperature instrument with 2 probe inputs. Range 0-100% RH & -50 to 200 C. Psychrometric calculations of Dew point, wet-bulb temperature, mixing ratio, enthalpy, water vapor content and water vapor density. Probes available separately...
HP23-AW-SET-14
HygroPalm 23-AW-A Set 14. The set is supplied in a tough, lightweight ABS carry case and include everything needed for measurement and calibration. The Set includes the HygroPalm-AW and HC2-AW probe. This set includes the 14mm Sample holder WP-14-S, Sample liners PS-14 (100 units) and 1 pack of each SCS..
HP31
HygroPalm 31 handheld relative humidity and temperature instrument with an integrated probe. Psychrometric calculations of Dew point, wet-bulb temperature, mixing ratio, enthalpy, water vapor content and water vapor density. Includes HW5-CODE, micro USB cable, soft case...
HPS-200-KIT1
Two HPS-200 Industrial Radio modems for RS232, RS485 and RS422 communications with 500m dipole antennas..
HPS120-KIT
Wireless RS232 transceiver, 2.4Ghz Frequency, 9pin connector, 100mW, 1.2 ~ 115.2Kbps transmission speed, 300m range dipole antenna. Kit includes 2 transceiver units, 2 antennas and USB power cable...
HRS Charge Controller
The HRS Regulator incorporates electronic Pulse Width Modulation (PWM) technology to regulate battery voltage to prevent overcharge. This generation of voltage regulation includes speed limiting to the turbine when the battery is full, which increases the lifetime of the windcharger. The HRS503 is designed for use with the Rutland 504..
HS 500 Series – Protection System
HS 510 Series Single Channel Display Trip Module Input 4-20mA accelerometer (HS-420 Series), Temperature. Output Pre-programmable, 2 trips, retransmit 4-20mA and 0-10 Volts. Start up Protection...
HS-100
100 Series ,100mV/g output, 5m ETFE cable, 1/4 inch -28 UNF Female/Male mounting..
HS-100 Series – General Purpose AC Accelerometer
A range of General Purpose AC Accelerometer suitable for vibration monitoring. This HS-100 series of accelerometers come with a variety of top, or side, entry connections with a range of mV sensitivity outputs. The units have a selection of connections and cable (including submersible and fire retardant) with a variety..
HS-100 Series – Submersible Accelerometer
100 Series ,100mV/g output, 5m ETFE cable, -28 UNF Female mounting..
HS-100T
HS-100T Series, side exit, 100mV/g output, 2 Pin MS Connector, -28 UNF Male mounting..
HS-105 High Temperature Accelerometer
105 Series, 50pC/g output, High Temperature rated to 150?C low noise FEP 5m , fitted with in-line Charge Amplifier to give 100mV/g output and 5 m ETFE cable other side of bullet, -28 UNF Female mounting..
HS-170 Series – Top-Entry Premium Compact Accelerometer
HS-170 Premium Compact Accelerometers with Top Entry Connection. Available with 5m Braided ETFE or Fire Retardant cables or 2-pin MS or 4-pin M12 Connectors. Available with 1/4-28UNF male/female, M6, M8, M10, M12 male or quick-fit female mounting threads. Bias voltage 10-12vDC, current range 0.5 to 8mA. Max shock 5000g...
HS-510
Input - 4-20mA accelerometer (HS-420 Series) Temperature and Output - Pre-programmable, 2 trips, re-transmit 4-20mA and 0-10 Volts...
HS-556
The HS-556 Signal Conditioner is used with a 100mV/g constant current type accelerometer and provides a 4-20mA output suitable for direct input to a vibration monitoring PLC. The 4-20mA output is proportional to true RMS velocity in mm/s. A buffered AC output is provided via a BNC connector to enable..
