DigiRail OEE IO Module
The NOVUS DigiRail OEE is an industrial I/O module for real-time data acquisition in manufacturing environments, directly supporting Overall Equipment Effectiveness (OEE) and Manufacturing Execution Systems (MES) initiatives. Featuring 6 digital and 2 analogue inputs, plus 2 digital outputs for process control. It offers robust connectivity via Ethernet or Wi-Fi,..
DTI-EMF-AC
85-265vAC Power Supply Option for EMF Electromagnetic Flow Meter..
GC-04
GEN II radio transmitter for an external thermistor probe. Temperature Range -40 to +70°C, Resolution 0.1°C and Accuracy ±0.2°C (-15 to 40°C). Supplied with 4 x AA Alkaline batteries and stub antenna...
GS-DPA-AC
GS-DPA-AC Dual Port Adapter Input Module for AC current sensors. The GS-DPA-AC can measure electric power current by connecting an AC current sensor (50A clamp/GS-AC50A; 100A clamp/GS-AC100A; 200A clamp/GS-AC200A) single-phase 2 wire, single-phase 3 wire, three-phase 3 wire, to the GL100 Data Logger. Each adapter can be used with up..
HC2-HP28
Hygroclip 2 Water Activity Probe HC2-HP28. 10mm Stainless Steel Insertion probe for water activity (humidity), temperature and dewpoint measurements. Range 0-1 AW and -40 to +85°C. The 280mm probe is attached by 2m of TPU cable to a 7 pin UART interface. Output is 0-1V and is freely scalable, accuracy..
HC2-IE102-EX
Intrinsically safe HC2 probe for EX applications with a 2m cable mounted ½" BSP screw-in probe for humidity and temperature monitoring. For use with the HF5 EX series of transmitters. Ranges Temperature -40 to +60°C, Relative Humidity 0 to 100%. Accuracy ±0.8%RH, ±0.1°C...
HS-AS054-075
Stainless Steel Vibration Spike, 75mm for HS620 & HS-630 Handheld Vibration Meters..
SGR570 Series PTO Torque Transducer
The SGR570 Series Torque Transducers are designed to monitor the torque and speed of PTO-driven equipment in agricultural and industrial equipment. Available with ranges up to 0-2,000 Nm. The SGR570 units also has RS232, CANbus or USB output to interface with TorqView Windows software, which provides a PC real time..
VLS-DP/MB
D-Style Mounting Bracket for the VLS RPM Sensor..
CURRENT SHUNT 0-16A
The POC module is meant as Pen Offset High current shunt for recorder ranges of 100mV or 200mV. Maximum continuous current is 16A. Peak current is 20A for 2 min. The shunt has no thermal or current protection and is tested for frequencies below 20 kHz. Fast mounting on all..
CURRENT SHUNT 0-20MA
This module transforms a 0-20 mA signal into a Voltage output by means of a highly accurate resistor (125 Ohm). Full accuracy is guaranteed over the recorder temperature range...
CURRENT SHUNT 4-20MA
This module transforms a 4-20 mA signal into a Voltage output by means of a highly accurate resistor (125 Ohm). Full accuracy is guaranteed over the recorder temperature range...
CUSTOMSCADA
Custom configuration of Superview SCADA Software to match application requirements for NOVUS devices. Price per hour for customisation...
10130056
ComNav G3B GNSS Satellite with G2B Compass Differential GPS (DGPS) correction, G3 Colour Display and 30m cable. Output: NMEA0183. Update rate: Heading & position updates at up to 20 times per second, and can operate at sustained turn rates up to 90° per second. Power Supply 10 to 36vDC (250mA..
789260-1
Pole Mount for 40/40C or D SharpEye Flame Detectors. 3" U-Bolt Stainless Steel Mounting...
8804171001
RHT Climate-DM-400S-485 Duct Mounted Temperature and Relative Humidity Transmitter with 400mm Stainless Steel Probe. Two analogue outputs, configurable as 4-20mA or 0-10V for any sensor or calculated psychromatic readings. Two configurable alarm outputs and RS485 Modbus Comms. Temperature Range -40 to +100°C, Relative Humidity Range 0 to 100%RH. Power Supply..
93.0486
MiniAir20 Micro Steel vane anemometer. Air velocity range 1.3-40m/s with accuracy ±1.5% of full scale, ±3.5% of reading. Sensing head 11mm diameter x 15mm, probe length 175mm. Sensor is supplied with 1.8m cable and connector for interfacing with MC20 and MC 4.0 Displays with Lemo Connectors. Steel sensing head screwed..
CA-12/13
Caravan Rigging Kit. Kit consists of 2 sets of 3 guy wires ready fitted to the tower attachments for upper and lower sections, shackles and ground anchors. The guys are polypropylene covered galvanised steel and all steel parts are plated for weather protection...
DTI-EMF-DC
18-38vDC Power Supply Option for EMF Electromagnetic Flow Meter..
HC2-IE105-EX
Intrinsically safe HC2 probe for EX applications with a 5m cable mounted ½" BSP screw-in probe for humidity and temperature monitoring. For use with the HF5 EX series of transmitters. Ranges Temperature -40 to +60°C, Relative Humidity 0 to 100%. Accuracy ±0.8%RH, ±0.1°C...
LEO2-O2-1-30BAR
LEO2-O2 Digital Manometer for O2 Applications. Pressure range -1 to 30 Bar with 0.01 Bar resolution and 0.1%FS accuracy. Peak reading function and selectable engineering units. Internal battery for up to 1,000 hours continuous operation. Pressure connection: Stainless Steel 7/16″-20 UNF male connection with ¼” BSP swivel adapter. Galdem HT270..
789260-3
Pole Mount for 40/40C or D SharpEye Flame Detectors. 4" U-Bolt Stainless Steel Mounting...
HC2-IE110-EX
Intrinsically safe HC2 probe for EX applications with a 10m cable mounted ½" BSP screw-in probe for humidity and temperature monitoring. For use with the HF5 EX series of transmitters. Ranges Temperature -40 to +60°C, Relative Humidity 0 to 100%. Accuracy ±0.8%RH, ±0.1°C...
DA2597-SMART-CHARGER
Smart charger, 3A output for lithium polymer batteries. Charge time for 8AH batteries 4-6 hours, 22AH batteries 7-10 hours..
