COLGSM-868MHZ
Colinear GSM Wall mount antenna, 3dB gain with 5m of Cable and SMA male connector. Supplied with mounting bracket...
Corrosive Chemical Oval Gear Meter
The CR range of oval gear meters for corrosive chemical applications. Made with a PPS body, Hastelloy C shaft and PPS Rotors...
CP11 – Handheld Instrument for Temp, RH and CO2 Measurements
The CP11 handheld instrument is an economical multiple parameter meter that simultaneously measures and records CO2, humidity and temperature. Operating ranges: -20 to +60°C, 0.1 to 99.95% RH and 0-5,000ppm CO2, calculated Dew Point and Wet Bulb Temperature. 18,000 values with time stamp, automatic recording (%RH/°C/ppm), 99 single values with..
CRE-S100-CAB
RS232 connection cable with CRE subsea connectors, depth rated to 4000 metres..
CS-SP10L
CS Series Current Transducer. Jumper selectable Current Ranges: 0-10, 0-20 or 0-50A with a self-powered 0-10V Output, Accuracy ±1%FS, Response Time: 0.5 Seconds. Suitable for single phase circuits with a frequency 40-100Hz. Isolation voltage 600vAC RMS. Solid Core transducer with a 22.6mm conductor hole. UL94V-0 flamablility rated ABS enclosure 63..
CS-SP420L
CS Series Current Transducer. Jumper selectable Current Ranges: 0-10, 0-20 or 0-50A with a 24vDC loop-powered 4-20mA Output, Accuracy ±1%FS, Response Time: 0.5 Seconds. Suitable for single phase circuits with a frequency 40-100Hz. Isolation voltage 600vAC RMS. Split Core transducer with a 22.6mm conductor hole. UL94V-0 flamablility rated ABS enclosure..
CS-U-VL10-0
Stainless Steel rounded end probe. 125mmx3.2mm U bead, with 10m VS cable...
CS-UU-VL5-0
Stainless Steel rounded end probe. 125mmx3.2mm UU bead, with 5m VS cable...
CTX300-501
CTX 300 for refrigerant gases R22 - R12 Range 0-1 % (R12) Range 0-2000 ppm (R22) For safe area use only..
CTX300-508
CTX 300 transmitter Methyl Chloride 0-500 ppm Methylen Chloride 0-500 ppm For safe area use only..
0367710
Pyrheliometer Mounting Kit. To mount a CHP1/SHP1 series pyrheliometer to the side plate of the 2AP or Solys 2 Suntracker...
10130055
ComNav G3B GNSS Satellite with G2B Compass Differential GPS (DGPS) correction, G3 Colour Display and 15m cable. Output: NMEA0183. Update rate: Heading & position updates at up to 20 times per second, and can operate at sustained turn rates up to 90° per second. Power Supply 10 to 36vDC (250mA..
1405-PK-400
WindSonic75 Ultrasonic anemometer for wind speed and direction monitoring. Wind speed 0-75 m/s, accuracy ±2%, wind direction 0-359°, accuracy ±2°. Output RS232 NMEA or ASCII, Operating temperature -35 to +70°C, Storage temperature -40 to +80°C. Input voltage 12-30vDC. Corrosion-free Polycarbonate housing. Supplied with Windcom software and mating connector...
1733-PK-030
The M12 to USB adaptor provide power and data to be supplied to a MetConnect Compact Weather station for initial set-up or reconfiguration. Adaptor is not weatherproof and should not be used once units are left on site...
789260-2
Pole Mount for 40/40C or D SharpEye Flame Detectors. 2" U-Bolt Stainless Steel Mounting...
8421
DIN Rail mounting clip for head mount transmitters..
8803819706
TEMP-DM Duct Mounted Temperature Transmitter with 150mm probe. Programmable 4-20mA output, range: -40 to +120°C. 12-30vDC loop power supply. Electrical circuit operating temperature range: -10 to +65°C...
8804131000
RHT Climate-DM-400S Duct Mounted Temperature and Relative Humidity Transmitter with 400mm Stainless Steel Probe. Two analogue outputs, configurable as 4-20mA or 0-10V for any sensor or calculated psychromatic readings. Two configurable alarm outputs. Temperature Range -40 to +100°C, Relative Humidity Range 0 to 100%RH. Power Supply 12 to 32vDC. USB..
8806030380
Programmable TxIsoRail, single channel isolated temperature transmitter. Suitable for PT100, Thermocouple (Type J, K, T, E, N, R, S, or B), 0-50mV, linear resistance, mA and V input. Transmitter generates a 0-10V output which is linear to the measured input signal range. 1000vAC isolation between sensor input and output. Power..
93.0440
MiniAir20 Micro Steel vane anemometer. Air velocity range 1.0-20m/s with accuracy ±1.5% of full scale, ±3.5% of reading. Sensing head 11mm diameter x 15mm, probe length 175mm. Sensor is supplied with 1.8m cable and Lemo plug for interfacing with MC20 and MC 4.0 Displays with Lemo Connectors. Steel sensing head..
ANO-4X12BIT
WindMaster - 4 off 12 Bit Analogue Outputs (0-20mA, 4-20mA, 0-5V, ±2.5V, ±5V). 4 Channels Available with user selectable full scale wind speed...
AP-5000 Aquaprobe Package
The AP-5000 Aquaprobe packages of the advanced portable multi-parameter water monitoring probes. The AP-5000 comes pre fitted probes covering pH, ORP, Conductivity, TDS, SSG, Resistivity, Salinity, Dissolved Oxygen, Depth and Temperature probes. The AP-5000 features four empty sockets that aren't restricted like the AP-2000 package. The probes are constructed from..
CA-12/12
4m Caravan Tower Kit. Kit consists of 2 x 2m sections of 35mm outside diameter polished stainless steel tube with tube joiner and ground fixing spike. The tower must be supported by the Tower Rigging Kit or other adequate support supplied by the user...
DigiRail Modbus I/O Modules
The DigiRail Modbus I/O Modules offer versatile DIN rail mountable input/output modules for industrial automation, all configured using the free DigiConfig software via Modbus RTU commands. The DigiRail-2A provides two universal analogue inputs, supporting various signals like thermocouples, PT100s, mV, V, and mA. The DigiRail-4C is a digital counter module..
