B103879
40/40M Multi IR (IR4) SharpEye Flame Detector. Detector suitable for near detection with a sensitivity range of 30m for a 0.1m gasoline fire and Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable..
B103880
40/40M Multi IR (IR4) SharpEye Flame Detector. Detector suitable for far detection with a sensitivity range of 65m for a 0.1m gasoline fire and Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable..
B103883
40/40LB UV/IR SharpEye Flame Detector. Detector suitable for very near detection with a sensitivity range of 15m for a 0.1m gasoline fire and Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable gland..
B103884
40/40L UV/IR SharpEye Flame Detector. Detector suitable for very near detection with a sensitivity range of 15m for a 0.1m gasoline fire and without Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable..
B103888
Swivel mount for 40/40 series Flame Detectors. The bracket allows for up to 40 movement in any direction. This ensures the maximum effectiveness and accuracy of the location for the detectors optimum coverge area...
B103908
Weather Protector for 40/40 Flame Detectors. Will protect the detector from rain, snow and direct sunlight...
B104013
Mini PC pre-loaded with software that enables the user to re-configure settings or perform diagnostics on all 40/40 series Flame Detectors. Kit includes cable harness with RS485 to USB converter...
B104068
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 703. Max line of sight distance 50 to 140m. Power Supply 18-32vDC. Electrical connection 2 x M25, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a tilt mount...
B104211
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 701. Max line of sight distance 4 to 20m. Power Supply 18-32vDC. Electrical connection 2 x 3/4 inch NPT, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a..
B104212
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 703. Max line of sight distance 50 to 140m. Power Supply 18-32vDC. Electrical connection 2 x 3/4 inch NPT, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a..
B104231
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 702. Max line of sight distance 15 to 70m. Power Supply 18-32vDC. Electrical connection 2 x M25, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a tilt mount...
B104238
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 702. Max line of sight distance 15 to 70m. Power Supply 18-32vDC. Electrical connection 2 x 3/4 inch NPT, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a..
0362621
Waterproof 8-pin plug connector with 10m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3..
0367712
Small Top Mounting Plate for a single global radiation instruments, with or without ventilation units...
0382450
PR1 Smart Pyranometer for the RaZON+ Solar Monitoring System. Pyranometer is supplied with no plug or cable but will connect to RaZON+ using the existing cable. PR1 sensors can be exchanged without the need for any adjustments. This allows the PR1 from a RaZON+ to be swapped to allow for..
820KCG2485
CG-485 ClickNGo Module, RS485 Interface Module. Size 1 Module with RS485 Modbus RTU Protocol. Operating Temp -20 to +60°C, 80%RH. Dimensions: 53.8 x 10.6 x 22.2mm, Weight: 10g. IP50 when installed in controller...
AP-2000 Aquaprobe Package
The AP-2000 Aquaprobe packages are the smaller of the advanced portable multi-parameter water monitoring probes.The AP-2000 comes pre fitted probes covering pH, ORP, Conductivity, TDS, SSG, Resistivity, Salinity, Dissolved Oxygen and Temperature probes, the AP-2000-D add a depth sensor. Each probe comes with two empty sockets to added an optical,..
DO7442-H
Dissolved Oxygen sensor with a Lead anode and a HDPE membrane for low range applications. Range 0-200% saturation with a 4-20mA output. Sensors are fitted with a standard of 3m cable...
GD-21
GEN II radio transmitter for a single external K-Type/T-Type thermocouple probes with display. Range -200 to +200°C, Resolution 0.1°C and Accuracy ±0.3°C. Supplied with 4 x AA Alkaline batteries, stub antenna and integrated LCD display...
GL7-DCB
4 Channel Strain Gauge Measurement Module for GL7000. Measurement range: 0.2, 0.25, 0.4, 0.5, 1, 2, 2.5, 4, 5 or 10mV/V, depending on bridge voltage; 1, 2, 5, 10, 20, 50, 100, 200, 500 mV and 1, 2, or 5V; 1, 2, 5, 10, 20, 50, 100, 200 or 500..
HC2-P05
Hygroclip 2 Water Activity Probe HC2-P05. 5mm Stainless Steel Insertion probe for water activity (humidity), temperature and dewpoint measurements. Range 0-1 AW and -40 to +85 C. The 200mm probe is attached by 2m of TPU cable to a 7 pin UART interface. Output is 0-1V and is freely scalable,..
K107
Series 30 programming kit comprising of: interface unit, data transfer cable, amphenal plug adaptor for series 30 transmitters, mains power lead, Palm programming lead, and READ30/PROG 30 software...
LEO-SUBSEA-DNLD-CABLE
Download cable for Leo Subsea 4000M-W and Leo Subsea 4000M-ED, with MCIL5F subcon connector mated with Keller K104 download cable...
OCEANDISP-4K-CABLE
OceanDISP-4K Subsea Display unit. 5m cable assembly with inline connectors - fitted with subcon MCIL5F miniature 5 pin female connector to 5501-1508 Burton connector. Suitable for 1K, 2K,3K and 4K units...
