ACC-06
Digital Lead Adapter (Length 1m) 15 Way D type (female) to RS232, USB and Power Connector. For connecting SGR/RWT to PC via USB (Option G) or RS232, Also needs Digital Lead (ACC4) to connect to SGR/RWT..
HC2-IM310-EX
Intrinsically safe HC2 probe for EX applications with a 10m cable mounted 285mm stainless steel probe for humidity and temperature monitoring. For use with the HF5 EX series of transmitters. Ranges Temperature -40 to +60°C, Relative Humidity 0 to 100%. Accuracy 0.8%RH, 0.1°C...
0362605
Waterproof 2-pin plug connector with 100m of pre-wired high quality yellow signal cable with 2 wires and a shield covered with black sleeve for CMP Series Pyranometer and CUV5 Radiometers..
ACC-08
Digital Lead Adapter (Length 1m) 15 Way D type (female) to CANbus and Power Connector. For connecting SGR/RWT to PC via CANbus (Option H). Also needs Digital Lead (ACC4) to connect to SGR/RWT..
A – Magnetic Mounting Base
A - Magnetic Mounting Base..
ACC-09
Digital Lead Adapter (Length 1m) 15 Way D type (female) to CANbus, USB and Power Connector. For connecting SGR/RWT to PC via USB (Option G) or CANbus (Option H). Also needs Digital Lead (ACC4) to connect to SGR/RWT..
A223-0001-10G
Accelerometer, servo type, range +/-10 G , standard type with connector, output +/-5VDC, power supply +/-15vDC, non linearity less than 0.05% FRO, operating temperature -55 to + 95 deg C,...
A223-0001-1G
Accelerometer, servo type, range +/-1 G , standard type with connector, output +/-5VDC, power supply +/-15vDC, non linearity less than 0.05% FRO, operating temperature -55 to + 95 deg C,...
A223-0001-20G
Accelerometer, servo type, range +/-20 G , standard type with connector, output +/-5VDC, power supply +/-15vDC, non linearity less than 0.05% FRO, operating temperature -55 to + 95 deg C,...
A223-0001-2G
Accelerometer, servo type, range +/-2 G , standard type with connector, output +/-5VDC, power supply +/-15vDC, non linearity less than 0.05% FRO, operating temperature -55 to + 95 deg C,...
A223-0001-5G
Accelerometer, servo type, range +/-5 G , standard type with connector, output +/-5VDC, power supply +/-15vDC, non linearity less than 0.05% FRO, operating temperature -55 to + 95 deg C,...
ABS Wall Mount Enclosure
ABS wall mounted enclosure provide an IP65/67 protective enclosure for equipment from the weather or other environmental conditions. Enclosures are available in a wide range of sizes and styles suitable for wide range of applications. Omni Instruments can also customise your enclosures by fitting it with Hirschmann connectors, cable glands,..
AC Voltage Monitoring Relay HRN 33
The HRN 33 is an AC mains voltage monitoring relay with adjustable voltage set point from 167-276 VAC and adjustable trip delay of up to 10 seconds. It is ideal for monitoring mains power dropout. The output contact can be connected to a data logger or controller to indicate mains..
AC-NT128MB
128MB Flash Card. Industrial Type. Operating temperature range -40 to +85°C..
AC-NT512MB
512MB Flash Card. Industrial Type. Operating temperature range -40 to +85°C..
AC3001
Active cable for connecting HC2 sensors to USB connector for direct PC interface. HygroClip sensor will be powered by the USB Interface. Cable length 2.8m...
AC3009
Interface cable for connecting HygroFlex, HygroPalm and HygroLog instruments to a USB port on a PC. Instrument will be powered by the AC3009. Requires HW4 software installed on the PC...
ACS-0001-PK
Stainless steel deep water data logger kit. The kit includes the TK-4014 and ACS-0001 stainless steel container. Temperature Range -40 to +85°C. Temperature logger submersible to a depth of 10km...
18107086
Datalink assembly, software and download cable for MX6 Multi-gas detector...
2523145
Waterproof 4-pin plug connector for the following Kipp & Zonen equipment. CMP Series pyranometers, CGR3 & CGR4 pyrgeometers and CVF4 & CNF4 ventilation units. Requires customers own cable wiring...
820KCG1R16
CG-1R16 ClickNGo Module, 1 x 16A Relay Output Module. Size 2 Module with a single SPDT-NO Relay output. Operating Temp -20 to +60°C, 80%RH. Dimensions: 54 x 21.1 x 22.2mm, Weight: 15g. IP50 when installed in controller...
95.0014
MiniAir20 Macro vane anemometer. Air velocity range 0.2-20m/s with accuracy ±1% of full scale, ±1.5% of reading. Sensing head 85mm diameter x 80mm, probe length 235mm. Sensor is supplied with 1.8m cable and connector for interfacing with the MC 4.0 Displays with Lemo Connectors. Plastic sensing head with metal blade..
95.0380
MiniAir20 EEX Macro Vane Anemometer. Plastic measuring head, designed as a snap-on head with steel vane and shaft. Suitable for media temperatures up to 140°C. Range 0-20m/s with a ±1.0% FS accuracy. Probe head dimensions 85mm diameter x 80mm with a probe length of 235mm and 1.8m cable with connector..
