8803809706
TEMP-WM Wall Mount Temperature Transmitter with a programmable 4-20mA output. Full programmable range: -40 to +120°C, Operational Range: -20 to +60°C. 12-30vDC loop power supply...
8804121000
RHT Climate-DM-250S Duct Mounted Temperature and Relative Humidity Transmitter with 250mm Stainless Steel Probe. Two analogue outputs, configurable as 4-20mA or 0-10V for any sensor or calculated psychromatic readings. Two configurable alarm outputs. Temperature Range -40 to +100°C, Relative Humidity Range 0 to 100%RH. Power Supply 12 to 32vDC. USB..
8806030306
Programmable TxIsoRail, 2-wire isolated, single channel temperature transmitter. Suitable for PT100, Thermocouple (Type J, K, T, E, N, R, S, or B), 0-50mV, linear resistance, mA and V input. Transmitter generates a 2-wire loop powered 4-20mA output which is linear to the measured input signal range. 1000vAC isolation between sensor..
8830007750
RTD Sensor in 316 Stainless Steel. 6mm diameter and 100mm length probe. Connection thread is 1/2" BSP male thread and the probe comes with 2m PVC flying lead. Operating and measurement temperature range of -20 to 100¶§C..
9469-ET-KIT
Intrinsically Safe Wireless Access Point/Bridge, Zone 1. Power supply 12vDC, or powered through the ethernet connection (PoEx)...
95.0006
MiniAir20 Micro vane anemometer. Air velocity range 0.6-20m/s with accuracy ±1% of full scale, ±3% of reading. Sensing head 11mm diameter x 15mm, probe length 165mm. Sensor is supplied with 2m cable and connector for interfacing with MC20 and MC 4.0 Displays with Lemo Connectors. Plastic sensing head with metal..
98.0247
Type 454 wind anemometer complete with analogue indicator, range expanding kit and 15m cable. Range 0-200 Km/h...
ACC-02
12 Pin male Lumberg connnector for the digital outputs with flying leads...
ANI-4X12BIT
WindMaster - 4 off 12 Bit Analogue ±5V Inputs. Up to 4 Single Ended or 2 Differential...
AP-2000
AQUAPROBE AP-2000 supplied with Optical DO, EC, pH, ORP and Temperature sensors...
AP-2000-D
AQUAPROBE AP-2000-D supplied with Optical DO, EC, pH, ORP, Temperature and Depth sensors...
AP-700 Aquaprobe Packages
The AP-700 Aquaprobe Packages offer a complete package capable of providing everything you need to test water. The AP-700 Aquaprobe Package include an Aquaprobe AP-700 (including DO, EC, pH, ORP and temperature sensors), a 3 meter cable, Bluelink adaptor or GPS Aquameter and various accessories, all housed in a hard..
CA-11/74
HRDi Remote Display. Recess Panel, Flush or Surface Mounting options. Will display all information from the HRDi charge regulator. Dimensions: Surface mount : 125 x 75 x 50mm Weight : 203g, Recess Mount : 125 x 75 x 9mm Weight :132g, Recess Mount Cut Out : 100 x 62mm..
CA-12/03
Stainless steel tube pre-drilled at one end to suit a Windcharger for customers to adapt to own tower design. 1,200mm Length Stainless Steel Tube suitable for Rutland 914i or 1200 Windchargers...
CA-12/08
6.4m Land Tower Kit. Kit consists of 3 x 2.13m sections of 48mm diameter galvanised steel tube ready drilled for assembly complete with joiners. Suitable for use with Rutland 914i, 1200 and FM910-4 Windchargers. Part Number CA-12/08...
CA-12/24
4 pack of SunWare Solar Panel Side Fixing Clips. Suitable for fixing Sunware series 20 frameless solar modules or plates up to 3mm thickness at the edge. Material: PUR, approx 100 shore (like hard rubber). Packs include screws 8 x (3,6 x 16mm, VA) and washers...
DTI-EMF-ELECTRODE-316L
316L Stainless Steel Electrodes for DTI-EMF Electromagnetic Flow Meter. Suitable for: Water (Domestic, Industrial, Raw, Well and Urban Sewage; and Weakly Corrosive Acid, Alkali and Salt Solutions...
EX-2000/LITE-3M
3m Extension Cable.suitable for AP-LITE and AP-2000 Probes, complete with AquaConn connectors. Connectors are suitable for 10m submersion..
FCS521-SP-5V
Omni C Series Current Transducer. Selectable current ranges: 0-10, 0-20 or 0-50A with a 0-5V output, accuracy 1%FS. Suitable for single phase circuits with a frequency 40-400Hz. Isolation voltage 2000V. Split core transducer with a 20 x 22mm conducer hole. Certification: CE, UL and RoHS...
FS5000-K
Kalrez (Compound 4079) Seals for FS5000 Series Flow Switches. Temperature Range: -1 to 104°C (+30-220F). Kalrez is a carbon black filled product with excellent chemical resistance, good mechanical properties, and outstanding hot air aging properties. Low swell in organic acids, inorganic acids and aldehydes, and has good response to temperature..
GL7-V
10 channel voltage measurement module. Measurement range: 100mV and 10V F.S. and 1-5V F.S. Sampling rate: 1ms to 1hr. Screw terminal connection to 10 isolated input channels with simultaneous sampling. Modules has an in-built RAM memory for up to 2 million samples...
GS-21
GEN II radio transmitter for one external K or T type Thermocouple probe. Temperature range -200 to +200°C, Resolution 0.1°C and Accuracy ±0.3°C. Supplied with 4 x AA Alkaline batteries and stub antenna...
GS-CO2-S
GS-CO2 Space Mounted Carbon Dioxide & Temperature Transmitter. Non-Dispersive Infra-Red (NDIR) Sensor. Measurement Ranges: 0-2,000ppm & 0-40°C. Output: 2 x 4-20mA or 0-10vDC selectable. Power supply: 24vDC. IP30 Flame retardant ABS housing, dimensions 115 x 85 x 30mm...
GS-DPA
GS-DPA Dual Port Adapter Input Module. Allows for 2 sensors to connect to a single GL100. Compatible sensors are GS-TH (Temp & RH sensor), GS-LXUV (Illumination/UV sensor) and GS-CO2 (CO2 sensor)...
