Skip to content

omni instruments | sensors and data acquisition equipment

Omni Instruments Ltd

Sales & Technical Support

  • +44 (0) 1382 443000
  • info@omni.uk.com
Omni Instruments Ltd
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
Products
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
Need Help?
£0.00 0 Basket
Product
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
£0.00 0 Basket

Products

Home / Products
  • Grid View
  • List View

EX-LL-20M-V

EX-LL-20M-V is a 20 meter cable for gauge LeveLine sensors and includes a vent tube. Cable comes complete with AquaConn connectors, suitable for direct connection to Aquatel, Bluelink or Leveline Loggers. (Desiccant recommended to prevent moisture entering vent tube)...
View Product

EX-LL-30M

EX-LL-30M is a 30 meter cable for non-vented LeveLine sensors. Cable comes complete with AquaConn connectors, suitable for direct connection to Aquatel, Bluelink or Leveline Loggers...
View Product

EX-LL-30M-V

EX-LL-30M-V is a 30 meter cable for gauge LeveLine sensors and includes a vent tube. Cable comes complete with AquaConn connectors, suitable for direct connection to Aquatel, Bluelink or Leveline Loggers. (Desiccant recommended to prevent moisture entering vent tube)...
View Product
MC 4.0 Multiprobe Anemometer Basic - 400.0201

400.0201

MC 4.0 Multiprobe Anemometer Basic. The MC 4.0 is the base unit and can be used for determining the flow velocity, temperature and relative humidity of gaseous and liquid media with the relevant measurement probes. 3.2" TFT-Display, 2Hz measurement rate, internal logger for up to 1 million readings and bluetooth..

View Product

FH3.3/100

External Plug-in Relative Humidity Sensor for MSR Data Loggers, IP60 Rated. Relative Humidity Range: 0 to 100%RH, Accuracy ±1.8%RH (10...85%, 0...+40°C) & ±4%RH (85...95%, 0...+40°C). 1.0m black cable suitable for use up to +75°C (white cable up to +200°C available on request). A maximum of 5 pre-calibrated sensors can be..
View Product
MC 4.0 Multiprobe Anemometer with Touchscreen Display & Lemo Connector - 400.0202

400.0202

MC 4.0 Multiprobe Anemometer with Touchscreen and Lemo Connector. The MC 4.0 is the base unit and can be used for determining the flow velocity, temperature and relative humidity of gaseous and liquid media with the relevant measurement probes. 3.2" TFT Touchscreen Display, 2Hz measurement rate, internal logger for up..
View Product

FH3.3/160

MSR147WD External Plug-in Relative Humidity Sensor, IP60 Rated. Relative Humidity Range: 0 to 100%RH, Accuracy ±1.8%RH (10ƒ?Ý85%, 0ƒ?Ý+40°C) & ±4%RH (85ƒ?Ý95%, 0ƒ?Ý+40°C). 1.6m black cable suitable for use up to +75°C (white cable up to +200°C available on request). A maximum of 5 pre-calibrated sensors can be connected to a..
View Product

OLCT10-517

OLCT10 Fixed Gas Detector for R407C Refrigerant Gas Range 0-1000ppm. Output 4-20mA. Power supply 15-30vDC, consumption 100mA max. Operating temperature -10 to +60°C. Life span 24 months. Plastic housing, 118 x 157 x 60mm, IP65...
View Product

0385900

RT1 Solar PV Sensor. Solar Irradiance 0-2000Wm², Panel Temperature -40 to +100°C with RS485 Modbus Comms. Power Supply 5-30vDC. RS485 Modbus RTU Output showing: Solar irradiance (temperature compensated), PV Panel Temperature, External Power Voltage, Status (system health and operational readiness); Sensor ID; and calibration data. Supplied with RT1 housing, Two..
View Product

2000-BGA-PE

AP-2000 Phycoerythrin Electrode. Designed for Blue Green Algae Monitoring in Marine Water. Range 0-200.000 cells/mL. Minimum Level of Detection 400 cells/mL...
View Product

3113

3113 Slim Series Isolated HART Temperature Converter suitable for conversion of K and J Type Thermocouple or PT100 input to an isolated active 4-20mA or 20-4mA output signal. Response time: 60ms, Accuracy better than 0.05% of selected range, or 0.1°C. Power Supply: 24vDC ±30%, via power rail or terminals. 6mm..
View Product

3337

3337 Slim Series Isolated Loop-powered HART Temperature Converter suitable for conversion of K and J Type Thermocouple or PT100 input to an isolated passive 4-20mA or 20-4mA output signal. Response time: 60ms, Accuracy better than 0.05% of selected range, or 0.5 C. 6mm Slimline housing. Units are programmable via DIP..
View Product

400.0430

ThermoAir 4 Omni-Directional Thermal-Electric Directional Anemometer with Barometric Pressure Compensation. Sensing head surrounded by a removable 110mm diameter protective cage, handle 15mm diameter, probe length 300mm. The probe measures the flow velocity from all directions in the measuring plane perpendicular to the probe axis. Air Velocity Range: 0.015-1m/s. Accuracy..
View Product

5000-BGA-PC

AP-5000 Phycocyanin Electrode. Designed for Blue Green Algae Monitoring in Fresh Water. Range 0-300.000 cells/mL. Minimum Level of Detection 200 cells/mL...
View Product
PR 5114B Programmable Transmitter

5114B2A

Programmable Transmitter, 1 Channel, ATEX II (1) GD, RTD, TC, mV, R, 24...230 VAC/DC..
View Product

5131B2A

Single channel 2-wire programmable ATEX transmitter with a 7.5-35vDC power supply. Suitable for mA, V and mV Input and 4-20mA output...
View Product
4 Channel analogue output module for the MX32 v2 & MX43 Gas Controller.

6313980

4 Channel Analogue Output Module for the MX32 v2 & MX43 Gas Controller...
View Product

7000-BGA-PE

AP-7000 Phycoerythrin Electrode. Designed for Blue Green Algae Monitoring in Marine Water. Range 0-200.000 cells/mL. Minimum Level of Detection 400 cells/mL...
View Product

9116 Universal Converter

Universal converter module, detachable front programming unit 4510, can be configured for all types of standard industrial measuring signals such as RTD, TC, Ohm, potentiometer, mA and V...
View Product
MiniAir 20Ex Macro Vane Anemometer. Range 20m/s - MIEX202132

95.0388

MiniAir20 EEX Macro Vane Anemometer. Plastic measuring head, designed as a snap-on head with aluminium vane and shaft. Suitable for media temperatures up to 140°C. Range 0-20m/s with a ±1.0% FS accuracy. Probe head dimensions 85mm diameter x 80mm with a probe length of 235mm and 1.8m cable with connector..
View Product

FXP9/160

MSR FlexConnect Fluid Pressure Sensor. Range: -1000-3000mBar, Accuracy ±30mBar. Sensor is fitted with cable and FlexConnect connector. Material in contact with the media: Stainless Steel AISI 316L, Viton O'Ring. The sensor connects to the FlexConnect Box and MSR data logger and will be automatically detected...
View Product

G2S10I09LMA

Range 10-190, Size 1 inch BSPT (103 Bar), Stainless Steel..
View Product

GC-13E

Transmitters for use with external probes - Wired socket for 1 x RHT-10D RH/T probe..
View Product
LEO-REC-IS-300BAR

LEO-REC-IS-300BAR-1/4BSP

LEO Record Digital Manometer with digital display and data logger for pressure and temperature. Range 0 to 300 Bar with 100mBar resolution and 0.1%FS accuracy. Internal memory for up to 57,000 readings and internal battery for up to 2 years operation. Pressure connection: Stainless Steel ¼" BSP male connection with..
View Product
Previous Page1 … Page5 Next

EX-LL-20M-V

EX-LL-20M-V is a 20 meter cable for gauge LeveLine sensors and includes a vent tube. Cable comes complete with AquaConn connectors, suitable for direct connection to Aquatel, Bluelink or Leveline Loggers. (Desiccant recommended to prevent moisture entering vent tube). ...
View Product

EX-LL-30M

EX-LL-30M is a 30 meter cable for non-vented LeveLine sensors. Cable comes complete with AquaConn connectors, suitable for direct connection to Aquatel, Bluelink or Leveline Loggers. ...
View Product

EX-LL-30M-V

EX-LL-30M-V is a 30 meter cable for gauge LeveLine sensors and includes a vent tube. Cable comes complete with AquaConn connectors, suitable for direct connection to Aquatel, Bluelink or Leveline Loggers. (Desiccant recommended to prevent moisture entering vent tube). ...
View Product
MC 4.0 Multiprobe Anemometer Basic - 400.0201

400.0201

MC 4.0 Multiprobe Anemometer Basic. The MC 4.0 is the base unit and can be used for determining the flow velocity, temperature and relative humidity of gaseous and liquid media with the relevant measurement probes. 3.2" TFT-Display, 2Hz measurement rate, internal logger for up to 1 million readings and bluetooth connectivity. Dimensions: 168 x 68 x 38mm, Weight 300g, IP67 with a removeable blue rubber case. Operating Temperature 0 to 60°C, 0-99%RH. Compatible with digital ...

View Product

FH3.3/100

External Plug-in Relative Humidity Sensor for MSR Data Loggers, IP60 Rated. Relative Humidity Range: 0 to 100%RH, Accuracy ±1.8%RH (10...85%, 0...+40°C) & ±4%RH (85...95%, 0...+40°C). 1.0m black cable suitable for use up to +75°C (white cable up to +200°C available on request). A maximum of 5 pre-calibrated sensors can be connected to a single MSR147WD or MSR147W2D data loggers and will be automatically detected. ...
View Product
MC 4.0 Multiprobe Anemometer with Touchscreen Display & Lemo Connector - 400.0202

400.0202

MC 4.0 Multiprobe Anemometer with Touchscreen and Lemo Connector. The MC 4.0 is the base unit and can be used for determining the flow velocity, temperature and relative humidity of gaseous and liquid media with the relevant measurement probes. 3.2" TFT Touchscreen Display, 2Hz measurement rate, internal logger for up to 1 million readings and bluetooth connectivity. Dimensions: 168 x 68 x 38mm, Weight 300g, IP67 with a removeable blue rubber case. Operating Temperature 0 ...
View Product

FH3.3/160

MSR147WD External Plug-in Relative Humidity Sensor, IP60 Rated. Relative Humidity Range: 0 to 100%RH, Accuracy ±1.8%RH (10ƒ?Ý85%, 0ƒ?Ý+40°C) & ±4%RH (85ƒ?Ý95%, 0ƒ?Ý+40°C). 1.6m black cable suitable for use up to +75°C (white cable up to +200°C available on request). A maximum of 5 pre-calibrated sensors can be connected to a single MSR147WD or MSR147W2D data loggers and will be automatically detected. ...
View Product

OLCT10-517

OLCT10 Fixed Gas Detector for R407C Refrigerant Gas Range 0-1000ppm. Output 4-20mA. Power supply 15-30vDC, consumption 100mA max. Operating temperature -10 to +60°C. Life span 24 months. Plastic housing, 118 x 157 x 60mm, IP65. ...
View Product

0385900

RT1 Solar PV Sensor. Solar Irradiance 0-2000Wm², Panel Temperature -40 to +100°C with RS485 Modbus Comms. Power Supply 5-30vDC. RS485 Modbus RTU Output showing: Solar irradiance (temperature compensated), PV Panel Temperature, External Power Voltage, Status (system health and operational readiness); Sensor ID; and calibration data. Supplied with RT1 housing, Two dust caps, Thumb screw, Side installation adapter, Side mounting nut, ring and M6x30 screw, Side mounting PowAR Cinch clamp, 2-pin plug with 2.9 m ±0.05 ...
View Product

2000-BGA-PE

AP-2000 Phycoerythrin Electrode. Designed for Blue Green Algae Monitoring in Marine Water. Range 0-200.000 cells/mL. Minimum Level of Detection 400 cells/mL. ...
View Product

3113

3113 Slim Series Isolated HART Temperature Converter suitable for conversion of K and J Type Thermocouple or PT100 input to an isolated active 4-20mA or 20-4mA output signal. Response time: 60ms, Accuracy better than 0.05% of selected range, or 0.1°C. Power Supply: 24vDC ±30%, via power rail or terminals. 6mm Slimline housing. Units are programmable via DIP Switches and HART 7 Revision protocol. Suitable for use in ATEX Zone 2 Environments. ...
View Product

3337

3337 Slim Series Isolated Loop-powered HART Temperature Converter suitable for conversion of K and J Type Thermocouple or PT100 input to an isolated passive 4-20mA or 20-4mA output signal. Response time: 60ms, Accuracy better than 0.05% of selected range, or 0.5 C. 6mm Slimline housing. Units are programmable via DIP Switches and HART 7 Revision protocol. Suitable for use in ATEX Zone 2 Environments. ...
View Product

400.0430

ThermoAir 4 Omni-Directional Thermal-Electric Directional Anemometer with Barometric Pressure Compensation. Sensing head surrounded by a removable 110mm diameter protective cage, handle 15mm diameter, probe length 300mm. The probe measures the flow velocity from all directions in the measuring plane perpendicular to the probe axis. Air Velocity Range: 0.015-1m/s. Accuracy ±1.0% of full scale. The sensor can be used at temperatures from 0 to +60°C. The associated cable for connection to the remote transmitter ...
View Product

5000-BGA-PC

AP-5000 Phycocyanin Electrode. Designed for Blue Green Algae Monitoring in Fresh Water. Range 0-300.000 cells/mL. Minimum Level of Detection 200 cells/mL. ...
View Product
PR 5114B Programmable Transmitter

5114B2A

Programmable Transmitter, 1 Channel, ATEX II (1) GD, RTD, TC, mV, R, 24...230 VAC/DC ...
View Product

5131B2A

Single channel 2-wire programmable ATEX transmitter with a 7.5-35vDC power supply. Suitable for mA, V and mV Input and 4-20mA output. ...
View Product
4 Channel analogue output module for the MX32 v2 & MX43 Gas Controller.

6313980

4 Channel Analogue Output Module for the MX32 v2 & MX43 Gas Controller. ...
View Product

7000-BGA-PE

AP-7000 Phycoerythrin Electrode. Designed for Blue Green Algae Monitoring in Marine Water. Range 0-200.000 cells/mL. Minimum Level of Detection 400 cells/mL. ...
View Product

9116 Universal Converter

Universal converter module, detachable front programming unit 4510, can be configured for all types of standard industrial measuring signals such as RTD, TC, Ohm, potentiometer, mA and V. ...
View Product
MiniAir 20Ex Macro Vane Anemometer. Range 20m/s - MIEX202132

95.0388

MiniAir20 EEX Macro Vane Anemometer. Plastic measuring head, designed as a snap-on head with aluminium vane and shaft. Suitable for media temperatures up to 140°C. Range 0-20m/s with a ±1.0% FS accuracy. Probe head dimensions 85mm diameter x 80mm with a probe length of 235mm and 1.8m cable with connector for MiniAir 20EX display unit. Eex Class II: Chemical Industry. Part Ref MIEX202132 ...
View Product

FXP9/160

MSR FlexConnect Fluid Pressure Sensor. Range: -1000-3000mBar, Accuracy ±30mBar. Sensor is fitted with cable and FlexConnect connector. Material in contact with the media: Stainless Steel AISI 316L, Viton O'Ring. The sensor connects to the FlexConnect Box and MSR data logger and will be automatically detected. ...
View Product

G2S10I09LMA

Range 10-190, Size 1 inch BSPT (103 Bar), Stainless Steel ...
View Product

GC-13E

Transmitters for use with external probes - Wired socket for 1 x RHT-10D RH/T probe ...
View Product
LEO-REC-IS-300BAR

LEO-REC-IS-300BAR-1/4BSP

LEO Record Digital Manometer with digital display and data logger for pressure and temperature. Range 0 to 300 Bar with 100mBar resolution and 0.1%FS accuracy. Internal memory for up to 57,000 readings and internal battery for up to 2 years operation. Pressure connection: Stainless Steel ¼" BSP male connection with Viton O ring. Rear mating socket for configuration and downloading logged data via K114A. Certified ATEX approved for intrinsic safety. ...
View Product

EX-LL-20M-V

EX-LL-20M-V is a 20 meter cable for gauge LeveLine sensors and includes a vent tube. Cable comes complete with AquaConn connectors, suitable for direct connection to Aquatel, Bluelink or Leveline Loggers. (Desiccant recommended to prevent moisture entering vent tube)...
View Product

EX-LL-30M

EX-LL-30M is a 30 meter cable for non-vented LeveLine sensors. Cable comes complete with AquaConn connectors, suitable for direct connection to Aquatel, Bluelink or Leveline Loggers...
View Product

EX-LL-30M-V

EX-LL-30M-V is a 30 meter cable for gauge LeveLine sensors and includes a vent tube. Cable comes complete with AquaConn connectors, suitable for direct connection to Aquatel, Bluelink or Leveline Loggers. (Desiccant recommended to prevent moisture entering vent tube)...
View Product
MC 4.0 Multiprobe Anemometer Basic - 400.0201

400.0201

MC 4.0 Multiprobe Anemometer Basic. The MC 4.0 is the base unit and can be used for determining the flow velocity, temperature and relative humidity of gaseous and liquid media with the relevant measurement probes. 3.2" TFT-Display, 2Hz measurement rate, internal logger for up to 1 million readings and bluetooth..

View Product

FH3.3/100

External Plug-in Relative Humidity Sensor for MSR Data Loggers, IP60 Rated. Relative Humidity Range: 0 to 100%RH, Accuracy ±1.8%RH (10...85%, 0...+40°C) & ±4%RH (85...95%, 0...+40°C). 1.0m black cable suitable for use up to +75°C (white cable up to +200°C available on request). A maximum of 5 pre-calibrated sensors can be..
View Product
MC 4.0 Multiprobe Anemometer with Touchscreen Display & Lemo Connector - 400.0202

400.0202

MC 4.0 Multiprobe Anemometer with Touchscreen and Lemo Connector. The MC 4.0 is the base unit and can be used for determining the flow velocity, temperature and relative humidity of gaseous and liquid media with the relevant measurement probes. 3.2" TFT Touchscreen Display, 2Hz measurement rate, internal logger for up..
View Product

FH3.3/160

MSR147WD External Plug-in Relative Humidity Sensor, IP60 Rated. Relative Humidity Range: 0 to 100%RH, Accuracy ±1.8%RH (10ƒ?Ý85%, 0ƒ?Ý+40°C) & ±4%RH (85ƒ?Ý95%, 0ƒ?Ý+40°C). 1.6m black cable suitable for use up to +75°C (white cable up to +200°C available on request). A maximum of 5 pre-calibrated sensors can be connected to a..
View Product

OLCT10-517

OLCT10 Fixed Gas Detector for R407C Refrigerant Gas Range 0-1000ppm. Output 4-20mA. Power supply 15-30vDC, consumption 100mA max. Operating temperature -10 to +60°C. Life span 24 months. Plastic housing, 118 x 157 x 60mm, IP65...
View Product

0385900

RT1 Solar PV Sensor. Solar Irradiance 0-2000Wm², Panel Temperature -40 to +100°C with RS485 Modbus Comms. Power Supply 5-30vDC. RS485 Modbus RTU Output showing: Solar irradiance (temperature compensated), PV Panel Temperature, External Power Voltage, Status (system health and operational readiness); Sensor ID; and calibration data. Supplied with RT1 housing, Two..
View Product

2000-BGA-PE

AP-2000 Phycoerythrin Electrode. Designed for Blue Green Algae Monitoring in Marine Water. Range 0-200.000 cells/mL. Minimum Level of Detection 400 cells/mL...
View Product

3113

3113 Slim Series Isolated HART Temperature Converter suitable for conversion of K and J Type Thermocouple or PT100 input to an isolated active 4-20mA or 20-4mA output signal. Response time: 60ms, Accuracy better than 0.05% of selected range, or 0.1°C. Power Supply: 24vDC ±30%, via power rail or terminals. 6mm..
View Product

3337

3337 Slim Series Isolated Loop-powered HART Temperature Converter suitable for conversion of K and J Type Thermocouple or PT100 input to an isolated passive 4-20mA or 20-4mA output signal. Response time: 60ms, Accuracy better than 0.05% of selected range, or 0.5 C. 6mm Slimline housing. Units are programmable via DIP..
View Product

400.0430

ThermoAir 4 Omni-Directional Thermal-Electric Directional Anemometer with Barometric Pressure Compensation. Sensing head surrounded by a removable 110mm diameter protective cage, handle 15mm diameter, probe length 300mm. The probe measures the flow velocity from all directions in the measuring plane perpendicular to the probe axis. Air Velocity Range: 0.015-1m/s. Accuracy..
View Product

5000-BGA-PC

AP-5000 Phycocyanin Electrode. Designed for Blue Green Algae Monitoring in Fresh Water. Range 0-300.000 cells/mL. Minimum Level of Detection 200 cells/mL...
View Product
PR 5114B Programmable Transmitter

5114B2A

Programmable Transmitter, 1 Channel, ATEX II (1) GD, RTD, TC, mV, R, 24...230 VAC/DC..
View Product

5131B2A

Single channel 2-wire programmable ATEX transmitter with a 7.5-35vDC power supply. Suitable for mA, V and mV Input and 4-20mA output...
View Product
4 Channel analogue output module for the MX32 v2 & MX43 Gas Controller.

6313980

4 Channel Analogue Output Module for the MX32 v2 & MX43 Gas Controller...
View Product

7000-BGA-PE

AP-7000 Phycoerythrin Electrode. Designed for Blue Green Algae Monitoring in Marine Water. Range 0-200.000 cells/mL. Minimum Level of Detection 400 cells/mL...
View Product

9116 Universal Converter

Universal converter module, detachable front programming unit 4510, can be configured for all types of standard industrial measuring signals such as RTD, TC, Ohm, potentiometer, mA and V...
View Product
MiniAir 20Ex Macro Vane Anemometer. Range 20m/s - MIEX202132

95.0388

MiniAir20 EEX Macro Vane Anemometer. Plastic measuring head, designed as a snap-on head with aluminium vane and shaft. Suitable for media temperatures up to 140°C. Range 0-20m/s with a ±1.0% FS accuracy. Probe head dimensions 85mm diameter x 80mm with a probe length of 235mm and 1.8m cable with connector..
View Product

FXP9/160

MSR FlexConnect Fluid Pressure Sensor. Range: -1000-3000mBar, Accuracy ±30mBar. Sensor is fitted with cable and FlexConnect connector. Material in contact with the media: Stainless Steel AISI 316L, Viton O'Ring. The sensor connects to the FlexConnect Box and MSR data logger and will be automatically detected...
View Product

G2S10I09LMA

Range 10-190, Size 1 inch BSPT (103 Bar), Stainless Steel..
View Product

GC-13E

Transmitters for use with external probes - Wired socket for 1 x RHT-10D RH/T probe..
View Product
LEO-REC-IS-300BAR

LEO-REC-IS-300BAR-1/4BSP

LEO Record Digital Manometer with digital display and data logger for pressure and temperature. Range 0 to 300 Bar with 100mBar resolution and 0.1%FS accuracy. Internal memory for up to 57,000 readings and internal battery for up to 2 years operation. Pressure connection: Stainless Steel ¼" BSP male connection with..
View Product

CONTACT US

8:30am to 5pm Monday to Thursday
8:30am to 3pm on Friday.

  • +44 (0) 1382 443000
  • info@omni.uk.com

A real person will answer the phone and deal with your enquiry.
You can also click the button below and fill in our online enquiry form.

Technical Sales

links

  • About
  • Contact
  • Custom Systems
  • Privacy & Cookies
  • Terms & Conditions

omni instruments

Omni Instruments Ltd,
Unit 1, 14 Nobel Road,
Wester Gourdie Industrial Estate,
Dundee, DD2 4UH, UK

Sales & Support

  • +44 (0) 1382 443000
  • info@omni.uk.com

Payments

mastercard-color
visa-color
amex-color
Copyright Omni Instruments 2026 | Design. Build. Host.

        We are here to help

        Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

        Call us on +44 (0)1382 443000