Skip to content

omni instruments | sensors and data acquisition equipment

Omni Instruments Ltd

Sales & Technical Support

  • +44 (0) 1382 443000
  • info@omni.uk.com
Omni Instruments Ltd
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
Products
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
Need Help?
£0.00 0 Basket
Product
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
£0.00 0 Basket

Products

Home / Products
  • Grid View
  • List View

LL-CTD-ABS-020

The LL-CTD-ABS-020 is a conductivity, salinity and temperature logger with a 20m water depth range, designed for diverse seawater and surface water applications. Pressure sensor: 0-20m Absolute, conductivity, salinity and temperature sensors with socket. SDI-12 and Modbus outputs, with internal logging & 3.6V Lithium battery...
View Product

LL-CTD-ABS-050

The LL-CTD-ABS-050 is a conductivity, salinity and temperature logger with a 50m water depth range, designed for diverse seawater and surface water applications. Pressure sensor: 0-50m Absolute, conductivity, salinity and temperature sensors with socket. SDI-12 and Modbus outputs, with internal logging & 3.6V Lithium battery...
View Product

LL-CTD-ABS-100

The LL-CTD-ABS-100 is a conductivity, salinity and temperature logger with a 100m water depth range, designed for diverse seawater and surface water applications. Pressure sensor: 0-100m Absolute, conductivity, salinity and temperature sensors with socket. SDI-12 and Modbus outputs, with internal logging & 3.6V Lithium battery...
View Product

LL-CTD-GAUGE-010

The LL-CTD-GAUGE-010 is a conductivity, salinity and temperature logger with a vented 10m water depth range, designed for diverse seawater and surface water applications. Pressure sensor: 0-10m Gauge, conductivity, salinity and temperature sensors with socket. SDI-12 and Modbus outputs, with internal logging & 3.6V Lithium battery...
View Product

LL-CTD-GAUGE-020

The LL-CTD-GAUGE-020 is a conductivity, salinity and temperature logger with a vented 20m water depth range, designed for diverse seawater and surface water applications. Pressure sensor: 0-20m Gauge, conductivity, salinity and temperature sensors with socket. SDI-12 and Modbus outputs, with internal logging & 3.6V Lithium battery...
View Product

LL-CTD-GAUGE-050

The LL-CTD-GAUGE-050 is a conductivity, salinity and temperature logger with a vented 50m water depth range, designed for diverse seawater and surface water applications. Pressure sensor: 0-50m Gauge, conductivity, salinity and temperature sensors with socket. SDI-12 and Modbus outputs, with internal logging & 3.6V Lithium battery...
View Product

OLCT10-509

OLCT10 Fixed Gas Detector for R123 Refrigerant Gas Range 0-2000ppm. Output 4-20mA. Power supply 15-30vDC, consumption 100mA max. Operating temperature -10 to +60°C. Life span 24 months. Plastic housing, 118 x 126 x 63mm, IP65...
View Product
QI-300/5-3

QI-500/5-3

Current Transformer 500A, DIN rail mounting, 30mm hole, 5A Secondary..
View Product
TX2-5G011 Tango TX2 Gas Detector for SO2 & CO/H2 Low

TX2-5G021

Tango TX2 Two Gas Detector for Sulphur Dioxide (SO2) range 0-150 ppm in 0.1ppm increments & Carbon Monoxide (CO/H2 Low), Range 0-1,000 ppm in 1ppm increments (Two electrodes and a special catalyst with a lower sensitivity to Hydrogen). Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for..
View Product

026-04416

7 Pair Low Temperature Cable for WindObserver 70 & 75. Price per metre..
View Product
CSD 3 Sunshine Duration Sensor

0342901-033

CSD 3 Sunshine Duration Sensor for measuring the duration and amount of direct solar radiation above 120W/m². No moving parts, direct irradiance value derived from global and diffuse radiation measurements from 3 photo-diode detectors. Derived direct irradiance output signal of 1mV/W/m² and switched output: 1V for sunny; 0V for not..
View Product
CNF 4 Ventilation Unit.

0369700-002

CNF 4 Ventilation Unit. Specifically designed for the CNR 4 net radiometer to provide clean air-flow over all four domes and windows to minimise the formation of dew and reduce the frequency of dome cleaning. The built-in 10W heater will melt frost. Reduces frequency of dome cleaning. Minimises offsets and..
View Product
SHP1-V Smart Pyrheliometer

0375900-102

SHP1-V Pyrheliometer. Quartz window, integrated alignment aids, rain shield. Spectral range 200-4000nm, response time less than 2 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2-wire RS485 Modbus output with rescaleable 0-1V analogue output (default range -200 to +2000Wm²). Fitted with both 10K thermistor and PT100 internal temperature sensors..
View Product
CVF 4 Ventilation Unit

0378900-002

CVF 4 Ventilation unit designed to provide clean air-flow over the dome or window to minimise the formation of dew and reduce the frequency of dome cleaning. Replaceable fan inlet filter. Power Supply 8-13.5vDC (5W continuously at 12vDC, 5.5W with heater) Operating temperature range -40 to +70°C. Supplied with waterproof..
View Product

0386625

8-pin ODU Plug for self-wiring DustIQ Soiling Monitoring System...
View Product

11220007

ComNav G2B GNSS Satellite with Compass Differential GPS (DGPS) correction and 6m cable. Output: NMEA2000. Update rate: Heading & position updates at up to 20 times per second, and can operate at sustained turn rates up to 90° per second. Power Supply 10 to 36vDC (240mA @ 12vDC). The G2B..
View Product

1360-PK-105

Mains Power Communications Interface (PCI) Housed in 316 Stainless Steel Enclosure. Power Supply: 200-250vAC @ 10VA (100-120vAC with 115V Position) with Galvanic Isolation. RS422 Comms Anemometer to PCI and RS232/422 Output from PCI. Operating Conditions: -30 to +60°, 5 to 95%RH. Dimensions: 230 x 325 x 175mm, Weight 9.5Kg. IP65..
View Product
WindSonic M Ultrasonic Wind Sensor with Analogue Output

1405-PK-301

WindSonic M solid state sensor for wind speed and direction with analogue outputs. Wind speed 0-60 m/s, accuracy ±2%, wind direction 0-359°, accuracy ±2°. Serial Outputs: RS232, RS422, RS485, Analogue Outputs: 0-5V or 0(4)-20mA. Operating temperature -40 to +70°C, Storage temperature -40 to +90°C. Input voltage 7-30VDC, 9-44mA @ 12vDC..
View Product

1435396

XP Power Isolated DC-DC Converter. Input Voltage: 9-18vDC. Output Voltage 5vDC @ 200mA. Isolation 1000vDC...
View Product

18107078

Hand aspirated pump with manual bulb to draw gases across the MX6 gas detectors sensors..
View Product

2000-BGA-PC

AP-2000 Phycocyanin Electrode. Designed for Blue Green Algae Monitoring in Fresh Water. Range 0-300.000 cells/mL. Minimum Level of Detection 200 cells/mL...
View Product

3112

3112 Slim Series Isolated PT100 Converter suitable for conversion of 2-, 3- or 4-wire PT100 input to a 0/4-20mA, 0/1-5V or 0/2-10V output signal. Response time: less than 30ms or 300ms, Accuracy better than 0.05% of selected range, or 0.1°C. Power Supply: 24vDC ±30%, via power rail or terminals. 6mm..
View Product

3333

3333 Slim Series Loop-powered, PT100 Converter suitable for conversion of 2-, 3- and 4-wire PT100 input to a passive 4-20mA or 20-4mA output signal. Response time: 30ms or 300ms, Accuracy better than 0.1% of selected range, or 0.2 C. 6mm Slimline housing. Units are programmable via DIP Switches. Suitable for..
View Product

400.0412

ThermoAir 4 Directional Thermal-Electric Directional Anemometer. Sensing head 8mm diameter, handle 15mm diameter, probe length 300mm. The required diameter of the retraction opening for the probe is 9mm. Air Velocity Range: 0.015-1m/s. Accuracy ±1.0% of full scale. The sensor can be used at temperatures from 0 to +60°C. The..
View Product
Previous Page1 … Page5 Next

LL-CTD-ABS-020

The LL-CTD-ABS-020 is a conductivity, salinity and temperature logger with a 20m water depth range, designed for diverse seawater and surface water applications. Pressure sensor: 0-20m Absolute, conductivity, salinity and temperature sensors with socket. SDI-12 and Modbus outputs, with internal logging & 3.6V Lithium battery. ...
View Product

LL-CTD-ABS-050

The LL-CTD-ABS-050 is a conductivity, salinity and temperature logger with a 50m water depth range, designed for diverse seawater and surface water applications. Pressure sensor: 0-50m Absolute, conductivity, salinity and temperature sensors with socket. SDI-12 and Modbus outputs, with internal logging & 3.6V Lithium battery. ...
View Product

LL-CTD-ABS-100

The LL-CTD-ABS-100 is a conductivity, salinity and temperature logger with a 100m water depth range, designed for diverse seawater and surface water applications. Pressure sensor: 0-100m Absolute, conductivity, salinity and temperature sensors with socket. SDI-12 and Modbus outputs, with internal logging & 3.6V Lithium battery. ...
View Product

LL-CTD-GAUGE-010

The LL-CTD-GAUGE-010 is a conductivity, salinity and temperature logger with a vented 10m water depth range, designed for diverse seawater and surface water applications. Pressure sensor: 0-10m Gauge, conductivity, salinity and temperature sensors with socket. SDI-12 and Modbus outputs, with internal logging & 3.6V Lithium battery. ...
View Product

LL-CTD-GAUGE-020

The LL-CTD-GAUGE-020 is a conductivity, salinity and temperature logger with a vented 20m water depth range, designed for diverse seawater and surface water applications. Pressure sensor: 0-20m Gauge, conductivity, salinity and temperature sensors with socket. SDI-12 and Modbus outputs, with internal logging & 3.6V Lithium battery. ...
View Product

LL-CTD-GAUGE-050

The LL-CTD-GAUGE-050 is a conductivity, salinity and temperature logger with a vented 50m water depth range, designed for diverse seawater and surface water applications. Pressure sensor: 0-50m Gauge, conductivity, salinity and temperature sensors with socket. SDI-12 and Modbus outputs, with internal logging & 3.6V Lithium battery. ...
View Product

OLCT10-509

OLCT10 Fixed Gas Detector for R123 Refrigerant Gas Range 0-2000ppm. Output 4-20mA. Power supply 15-30vDC, consumption 100mA max. Operating temperature -10 to +60°C. Life span 24 months. Plastic housing, 118 x 126 x 63mm, IP65. ...
View Product
QI-300/5-3

QI-500/5-3

Current Transformer 500A, DIN rail mounting, 30mm hole, 5A Secondary ...
View Product
TX2-5G011 Tango TX2 Gas Detector for SO2 & CO/H2 Low

TX2-5G021

Tango TX2 Two Gas Detector for Sulphur Dioxide (SO2) range 0-150 ppm in 0.1ppm increments & Carbon Monoxide (CO/H2 Low), Range 0-1,000 ppm in 1ppm increments (Two electrodes and a special catalyst with a lower sensitivity to Hydrogen). Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for 3 months at 10 second interval plus 60 alarm events. The replaceable internal battery is suitable for up to 2 year continuous monitoring. Lightweight (126g), ...
View Product

026-04416

7 Pair Low Temperature Cable for WindObserver 70 & 75. Price per metre ...
View Product
CSD 3 Sunshine Duration Sensor

0342901-033

CSD 3 Sunshine Duration Sensor for measuring the duration and amount of direct solar radiation above 120W/m². No moving parts, direct irradiance value derived from global and diffuse radiation measurements from 3 photo-diode detectors. Derived direct irradiance output signal of 1mV/W/m² and switched output: 1V for sunny; 0V for not sunny. Typical accuracy better than 90%. Operating temperature -40 to +70°C. Integrated thermostatically controlled heater with 2 power levels; 1W or 10W. 12vDC power supply. ...
View Product
CNF 4 Ventilation Unit.

0369700-002

CNF 4 Ventilation Unit. Specifically designed for the CNR 4 net radiometer to provide clean air-flow over all four domes and windows to minimise the formation of dew and reduce the frequency of dome cleaning. The built-in 10W heater will melt frost. Reduces frequency of dome cleaning. Minimises offsets and improves stability. Replaceable fan inlet filter. Power supply 12vDC @ 1.3A. Supplied with waterproof 4-pin plug connector with 10m of pre-wired yellow signal cable. ...
View Product
SHP1-V Smart Pyrheliometer

0375900-102

SHP1-V Pyrheliometer. Quartz window, integrated alignment aids, rain shield. Spectral range 200-4000nm, response time less than 2 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2-wire RS485 Modbus output with rescaleable 0-1V analogue output (default range -200 to +2000Wm²). Fitted with both 10K thermistor and PT100 internal temperature sensors with output data individually temperature corrected. Supplied with waterproof 8-pin plug connector with 10m of pre-wired yellow signal cable. ...
View Product
CVF 4 Ventilation Unit

0378900-002

CVF 4 Ventilation unit designed to provide clean air-flow over the dome or window to minimise the formation of dew and reduce the frequency of dome cleaning. Replaceable fan inlet filter. Power Supply 8-13.5vDC (5W continuously at 12vDC, 5.5W with heater) Operating temperature range -40 to +70°C. Supplied with waterproof 4-pin plug connector with 10m of pre-wired yellow signal cable. Suitable for Kipp & Zonen CMP & SMP series pyranometers and CUV5 & UVS radiometers. ...
View Product

0386625

8-pin ODU Plug for self-wiring DustIQ Soiling Monitoring System. ...
View Product

11220007

ComNav G2B GNSS Satellite with Compass Differential GPS (DGPS) correction and 6m cable. Output: NMEA2000. Update rate: Heading & position updates at up to 20 times per second, and can operate at sustained turn rates up to 90° per second. Power Supply 10 to 36vDC (240mA @ 12vDC). The G2B contains a ComNav receiver module (containing two GNSS receivers, a 3-axis gyro, a 3-axis accelerometer and a 3-axis magnetometer), a DGPS Radio beacon receiver module, ...
View Product

1360-PK-105

Mains Power Communications Interface (PCI) Housed in 316 Stainless Steel Enclosure. Power Supply: 200-250vAC @ 10VA (100-120vAC with 115V Position) with Galvanic Isolation. RS422 Comms Anemometer to PCI and RS232/422 Output from PCI. Operating Conditions: -30 to +60°, 5 to 95%RH. Dimensions: 230 x 325 x 175mm, Weight 9.5Kg. IP65 Rated. ...
View Product
WindSonic M Ultrasonic Wind Sensor with Analogue Output

1405-PK-301

WindSonic M solid state sensor for wind speed and direction with analogue outputs. Wind speed 0-60 m/s, accuracy ±2%, wind direction 0-359°, accuracy ±2°. Serial Outputs: RS232, RS422, RS485, Analogue Outputs: 0-5V or 0(4)-20mA. Operating temperature -40 to +70°C, Storage temperature -40 to +90°C. Input voltage 7-30VDC, 9-44mA @ 12vDC (up to 45mA with analogue output). Hard Anodised Aluminium Alloy Construction. Supplied with Windcom software, 12-way mating connector and mounting kit. ...
View Product

1435396

XP Power Isolated DC-DC Converter. Input Voltage: 9-18vDC. Output Voltage 5vDC @ 200mA. Isolation 1000vDC. ...
View Product

18107078

Hand aspirated pump with manual bulb to draw gases across the MX6 gas detectors sensors ...
View Product

2000-BGA-PC

AP-2000 Phycocyanin Electrode. Designed for Blue Green Algae Monitoring in Fresh Water. Range 0-300.000 cells/mL. Minimum Level of Detection 200 cells/mL. ...
View Product

3112

3112 Slim Series Isolated PT100 Converter suitable for conversion of 2-, 3- or 4-wire PT100 input to a 0/4-20mA, 0/1-5V or 0/2-10V output signal. Response time: less than 30ms or 300ms, Accuracy better than 0.05% of selected range, or 0.1°C. Power Supply: 24vDC ±30%, via power rail or terminals. 6mm Slimline housing. Units are programmable via DIP Switches. Suitable for use in ATEX Zone 2 Environments. ...
View Product

3333

3333 Slim Series Loop-powered, PT100 Converter suitable for conversion of 2-, 3- and 4-wire PT100 input to a passive 4-20mA or 20-4mA output signal. Response time: 30ms or 300ms, Accuracy better than 0.1% of selected range, or 0.2 C. 6mm Slimline housing. Units are programmable via DIP Switches. Suitable for use in ATEX Zone 2 Environments. ...
View Product

400.0412

ThermoAir 4 Directional Thermal-Electric Directional Anemometer. Sensing head 8mm diameter, handle 15mm diameter, probe length 300mm. The required diameter of the retraction opening for the probe is 9mm. Air Velocity Range: 0.015-1m/s. Accuracy ±1.0% of full scale. The sensor can be used at temperatures from 0 to +60°C. The associated cable for connection to the remote transmitter has a total length of 1.5m. Thermo-electric anemometer suitable for dry instrument air or inert gas air ...
View Product

LL-CTD-ABS-020

The LL-CTD-ABS-020 is a conductivity, salinity and temperature logger with a 20m water depth range, designed for diverse seawater and surface water applications. Pressure sensor: 0-20m Absolute, conductivity, salinity and temperature sensors with socket. SDI-12 and Modbus outputs, with internal logging & 3.6V Lithium battery...
View Product

LL-CTD-ABS-050

The LL-CTD-ABS-050 is a conductivity, salinity and temperature logger with a 50m water depth range, designed for diverse seawater and surface water applications. Pressure sensor: 0-50m Absolute, conductivity, salinity and temperature sensors with socket. SDI-12 and Modbus outputs, with internal logging & 3.6V Lithium battery...
View Product

LL-CTD-ABS-100

The LL-CTD-ABS-100 is a conductivity, salinity and temperature logger with a 100m water depth range, designed for diverse seawater and surface water applications. Pressure sensor: 0-100m Absolute, conductivity, salinity and temperature sensors with socket. SDI-12 and Modbus outputs, with internal logging & 3.6V Lithium battery...
View Product

LL-CTD-GAUGE-010

The LL-CTD-GAUGE-010 is a conductivity, salinity and temperature logger with a vented 10m water depth range, designed for diverse seawater and surface water applications. Pressure sensor: 0-10m Gauge, conductivity, salinity and temperature sensors with socket. SDI-12 and Modbus outputs, with internal logging & 3.6V Lithium battery...
View Product

LL-CTD-GAUGE-020

The LL-CTD-GAUGE-020 is a conductivity, salinity and temperature logger with a vented 20m water depth range, designed for diverse seawater and surface water applications. Pressure sensor: 0-20m Gauge, conductivity, salinity and temperature sensors with socket. SDI-12 and Modbus outputs, with internal logging & 3.6V Lithium battery...
View Product

LL-CTD-GAUGE-050

The LL-CTD-GAUGE-050 is a conductivity, salinity and temperature logger with a vented 50m water depth range, designed for diverse seawater and surface water applications. Pressure sensor: 0-50m Gauge, conductivity, salinity and temperature sensors with socket. SDI-12 and Modbus outputs, with internal logging & 3.6V Lithium battery...
View Product

OLCT10-509

OLCT10 Fixed Gas Detector for R123 Refrigerant Gas Range 0-2000ppm. Output 4-20mA. Power supply 15-30vDC, consumption 100mA max. Operating temperature -10 to +60°C. Life span 24 months. Plastic housing, 118 x 126 x 63mm, IP65...
View Product
QI-300/5-3

QI-500/5-3

Current Transformer 500A, DIN rail mounting, 30mm hole, 5A Secondary..
View Product
TX2-5G011 Tango TX2 Gas Detector for SO2 & CO/H2 Low

TX2-5G021

Tango TX2 Two Gas Detector for Sulphur Dioxide (SO2) range 0-150 ppm in 0.1ppm increments & Carbon Monoxide (CO/H2 Low), Range 0-1,000 ppm in 1ppm increments (Two electrodes and a special catalyst with a lower sensitivity to Hydrogen). Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for..
View Product

026-04416

7 Pair Low Temperature Cable for WindObserver 70 & 75. Price per metre..
View Product
CSD 3 Sunshine Duration Sensor

0342901-033

CSD 3 Sunshine Duration Sensor for measuring the duration and amount of direct solar radiation above 120W/m². No moving parts, direct irradiance value derived from global and diffuse radiation measurements from 3 photo-diode detectors. Derived direct irradiance output signal of 1mV/W/m² and switched output: 1V for sunny; 0V for not..
View Product
CNF 4 Ventilation Unit.

0369700-002

CNF 4 Ventilation Unit. Specifically designed for the CNR 4 net radiometer to provide clean air-flow over all four domes and windows to minimise the formation of dew and reduce the frequency of dome cleaning. The built-in 10W heater will melt frost. Reduces frequency of dome cleaning. Minimises offsets and..
View Product
SHP1-V Smart Pyrheliometer

0375900-102

SHP1-V Pyrheliometer. Quartz window, integrated alignment aids, rain shield. Spectral range 200-4000nm, response time less than 2 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2-wire RS485 Modbus output with rescaleable 0-1V analogue output (default range -200 to +2000Wm²). Fitted with both 10K thermistor and PT100 internal temperature sensors..
View Product
CVF 4 Ventilation Unit

0378900-002

CVF 4 Ventilation unit designed to provide clean air-flow over the dome or window to minimise the formation of dew and reduce the frequency of dome cleaning. Replaceable fan inlet filter. Power Supply 8-13.5vDC (5W continuously at 12vDC, 5.5W with heater) Operating temperature range -40 to +70°C. Supplied with waterproof..
View Product

0386625

8-pin ODU Plug for self-wiring DustIQ Soiling Monitoring System...
View Product

11220007

ComNav G2B GNSS Satellite with Compass Differential GPS (DGPS) correction and 6m cable. Output: NMEA2000. Update rate: Heading & position updates at up to 20 times per second, and can operate at sustained turn rates up to 90° per second. Power Supply 10 to 36vDC (240mA @ 12vDC). The G2B..
View Product

1360-PK-105

Mains Power Communications Interface (PCI) Housed in 316 Stainless Steel Enclosure. Power Supply: 200-250vAC @ 10VA (100-120vAC with 115V Position) with Galvanic Isolation. RS422 Comms Anemometer to PCI and RS232/422 Output from PCI. Operating Conditions: -30 to +60°, 5 to 95%RH. Dimensions: 230 x 325 x 175mm, Weight 9.5Kg. IP65..
View Product
WindSonic M Ultrasonic Wind Sensor with Analogue Output

1405-PK-301

WindSonic M solid state sensor for wind speed and direction with analogue outputs. Wind speed 0-60 m/s, accuracy ±2%, wind direction 0-359°, accuracy ±2°. Serial Outputs: RS232, RS422, RS485, Analogue Outputs: 0-5V or 0(4)-20mA. Operating temperature -40 to +70°C, Storage temperature -40 to +90°C. Input voltage 7-30VDC, 9-44mA @ 12vDC..
View Product

1435396

XP Power Isolated DC-DC Converter. Input Voltage: 9-18vDC. Output Voltage 5vDC @ 200mA. Isolation 1000vDC...
View Product

18107078

Hand aspirated pump with manual bulb to draw gases across the MX6 gas detectors sensors..
View Product

2000-BGA-PC

AP-2000 Phycocyanin Electrode. Designed for Blue Green Algae Monitoring in Fresh Water. Range 0-300.000 cells/mL. Minimum Level of Detection 200 cells/mL...
View Product

3112

3112 Slim Series Isolated PT100 Converter suitable for conversion of 2-, 3- or 4-wire PT100 input to a 0/4-20mA, 0/1-5V or 0/2-10V output signal. Response time: less than 30ms or 300ms, Accuracy better than 0.05% of selected range, or 0.1°C. Power Supply: 24vDC ±30%, via power rail or terminals. 6mm..
View Product

3333

3333 Slim Series Loop-powered, PT100 Converter suitable for conversion of 2-, 3- and 4-wire PT100 input to a passive 4-20mA or 20-4mA output signal. Response time: 30ms or 300ms, Accuracy better than 0.1% of selected range, or 0.2 C. 6mm Slimline housing. Units are programmable via DIP Switches. Suitable for..
View Product

400.0412

ThermoAir 4 Directional Thermal-Electric Directional Anemometer. Sensing head 8mm diameter, handle 15mm diameter, probe length 300mm. The required diameter of the retraction opening for the probe is 9mm. Air Velocity Range: 0.015-1m/s. Accuracy ±1.0% of full scale. The sensor can be used at temperatures from 0 to +60°C. The..
View Product

CONTACT US

8:30am to 5pm Monday to Thursday
8:30am to 3pm on Friday.

  • +44 (0) 1382 443000
  • info@omni.uk.com

A real person will answer the phone and deal with your enquiry.
You can also click the button below and fill in our online enquiry form.

Technical Sales

links

  • About
  • Contact
  • Custom Systems
  • Privacy & Cookies
  • Terms & Conditions

omni instruments

Omni Instruments Ltd,
Unit 1, 14 Nobel Road,
Wester Gourdie Industrial Estate,
Dundee, DD2 4UH, UK

Sales & Support

  • +44 (0) 1382 443000
  • info@omni.uk.com

Payments

mastercard-color
visa-color
amex-color
Copyright Omni Instruments 2026 | Design. Build. Host.

        We are here to help

        Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

        Call us on +44 (0)1382 443000