MCIL4M-1500-MCIL4M
Power switch cable, with two times MCIL4M 4 pin male miniature inline subcon connectors, and 1.5 metres of cable...
Meteon Data Logger
The Meteon is an accurate handheld display and data logger designed specifically for the measurement of solar irradiance in combination with Kipp & Zonen radiometers and pyranometers. The Meteon will log up to 3500 samples, storing min, max and average value per logging interval. The logger will operate for 50..
MIEX06252
MiniAir 6EX Mini vane anemometer. Sensing head 22mm diameter x 28mm, probe length 175mm. Air velocity range 0-20m/s with a 0-2V output. Accuracy ±1% of full scale, ±3% of reading. Power supply 9-24vDC Sensor is supplied with 20m cable to zener barrier housing. Operating range -10 to +80°C. Plastic sensing..
MiniAir Vane Anemometers with Ex Certification
These MiniAir vane anemometers come with Ex certification and provide linear voltage or current outputs relative to the flow velocity ranges of up to 20m/s or 40m/s. Each unit comes with external electronics and EX barrier, with a standard 20m cable between the probe and electronics. The electronics must be..
Modbus RTU Temperature Sensor
The TST300 is a Modbus RTU Temperature Sensor, designed for accurate monitoring of temperatures in the range of -20 to +60°C. Up to 32 sensors can be connected back to a Modbus Master device. It features two RJ45 connectors for easy daisy-chaining on an RS485 Modbus, making it a robust..
MSL-EXT-DISP
External LCD display unit for MSL data logger, fitted in aluminium housing, display area 74mm x 45mm, with adjustable back light. Displays either 3 channels or 12 channels of data, programmable via data logger...
MTN/8107
Integral in-line signal conditioner module in potted box (25 x 40 x 13mm) fitted to AC LVDT with 0.5m PVC cable tail ends. Power Supply 14-24VDC, Output 4-20mA...
MTW-PULSE-OPTION-K=10
Pulse output option suitable for 15 & 20mm MTW hot water flow meters. One pulse for each 10Ltr...
N10129
LTE terminal for MSR385WD, supplied with short aerial and connecting cable. LTE frequency bands: B1, B3, B7, B8 and B20. Dimensions: 66 x 26 x 77mm. Weight: 80g. Operating conditions: -30 to +75 °C. Power Supply: via MSR385WD. The SIM card for the LTE terminal can be ordered separately...
N420
N420 Frequency Converter. Converts signals from pulse to an analogue current or voltage output. Units can be supplied pre-programmed with a flow meter, or supplied with software to allow user configuration. Programming via USB 2.0 interface, which can also provide an onscreen display on the PC. Output option: Analogue 0-5V,..
NIT-CAL
500ml Bottle of 1000 ppm Nitrate Stock Solution for Dilution...
NIT-CAL-10
500ml Bottle of 10 ppm Nitrate Stock Solution for Direct Calibration..
NIT-CAL-100
500ml Bottle of 100 ppm Nitrate Stock Solution for Direct Calibration or diluted in a 9:1 ratio with Deionised water to prepare a 10ppm solution...
Oil Debris Sensor
The Gill Sensors Oil Debris Sensor (WearDetect 4212 series) is a compact, solid-state condition-monitoring sensor engineered to provide continuous, real-time detection of internal mechanical wear in gearboxes, engines, transmission systems, and industrial machinery. Designed to directly replace a standard oil drain plug or fit into an oil bypass line, the..
Oil Debris Sensor With Display
The Oil Debris Sensor with Display (WearDetect series) is a real-time condition-monitoring sensor engineered to provide early warnings of mechanical wear and component failure in machinery gearboxes, engines, and industrial drivetrains. Replacing a standard drain plug or fitting directly into an oil bypass line, the solid-state sensor utilises a magnetic..
OLCT10-001
OLCT10 Fixed Gas Detector for Methane (CH4), Range 0-5% Volume. Output: 4-20mA. Response Time:<10 Seconds. Power supply: 15-30vDC, consumption 100mA max. Operating temperature: -10 to +60°C. Life span: 4 years. Plastic housing, 118 x 157 x 60mm, IP65. ATEX Certification: II 3G, Ex nA IIC T4...
OLCT10-500
OLCT10 Fixed Gas Detector for R12 Refrigerant Gas Range 0-1% volume. Output 4-20mA. Power supply 15-30vDC, consumption 100mA max. Operating temperature -10 to +60°C. Life span 24 months. Plastic housing, 118 x 157 x 60mm, IP65...
OMC-163
Heating set for OMC-16-2 wind sensor..
OMEGA-PULSE-OPTION-K=100
Pulse output option for Omega water meters 100Ltr/pulse..
OMNI-ECO-TYPE-SF
Small size magnetic transducers for pipe size 1"-4" (DN30-DN100mm) and OMNI-ECO-200M flow meter. Standard cable length: 5m (up to 25m available on request). Operating Temperature 0 to 90°C..
OMNI-TDI-HIGHTEMP-SET
Complete set of high temperature transducers for OMNI-TDI-200H flowmeter. Transducer set includes HS1 (for pipe diameter 15-100mm), HM1 (50-700mm) and HL1 (300-6000mm), operating temperature range 0-160 C..
ORP-250
500ml Bottle of 250mV ORP Calibration Solution for Direct Calibration...
PA-DPS-B
Right-angled mounting bracket for the PA-DPS-8x s..
PB-5001-1M5
Standard Thermistor Probe with moulded handle and connector (IP68 rated). The stainless steel probe is 150mm long and 5mm in diameter with a 1.5m cable. Temperature range -40 to 125°C with a 15 second response time in water...
