026-02663
Standard 9 Pair Cable for WindObserver 70 & 75. Price per metre..
0342901-030
CSD 3 Sunshine Duration Sensor for measuring the duration and amount of direct solar radiation above 120W/m². No moving parts, direct irradiance value derived from global and diffuse radiation measurements from 3 photo-diode detectors. Derived direct irradiance output signal of 1mV/Wm² and switched output: 1V for sunny; 0V for not..
0367703
Shading Ball Assembly. Including 2 shading balls on adjustable rods, large top mounting and second side mounting plate...
0369700-000
CNF 4 Ventilation Unit. Specifically designed for the CNR 4 net radiometer to provide clean air-flow over all four domes and windows to minimise the formation of dew and reduce the frequency of dome cleaning. The built-in 10W heater will melt frost. Reduces frequency of dome cleaning. Minimises offsets and..
0375900-100
SHP1-V Pyrheliometer. Quartz window, integrated alignment aids, rain shield. Spectral range 200-4000nm, response time less than 2 sec (95%), Operating temperature -40 to +80°C. Thermopile detector. 2-wire RS485 Modbus output with rescaleable 0-1V analogue output (default range -200 to +2000Wm²). Fitted with both 10K thermistor and PT100 internal temperature sensors..
0378900-000
CVF 4 Ventilation unit designed to provide clean air-flow over the dome or window to minimise the formation of dew and reduce the frequency of dome cleaning. Replaceable fan inlet filter. Power Supply 8-13.5vDC (5W continuously at 12vDC, 5.5W with heater) Operating temperature range -40 to +70°C. Waterproof connector, supplied..
11220006
ComNav G2 GNSS Satellite with Compass Differential GPS (DGPS) correction and 6m cable. Output: NMEA2000. Update rate: Heading & position updates at up to 20 times per second, and can operate at sustained turn rates up to 90° per second. Power Supply 10 to 36vDC (240mA @ 12vDC). The G2..
1360-PK-052
Intrinsically Safe WindObserver Anemometer. WindObserver IS Ultrasonic Anemometer with an IP66 Stainless Steel housing. Wind Speed 0-75m/s, Accuracy 2%, Wind Direction 0-360°, Accuracy ±4°. Power Supply: 6-12vDC. 30mA Peak. RS422 Full Duplex Communications. Dimensions: 380 x 210mm. Operating Conditions: -30 to +70°C, 0-100% RH, Precipitation 300mm/hr. ATEX, IECEx & UKEX..
1405-PK-300
WindSonic M solid state sensor for wind speed and direction. Wind speed 0-60m/s, accuracy ±2%, wind direction 0-359°, accuracy ±2%. Outputs RS232, RS422, RS485, Operating temperature -35 to +70°C, Storage temperature -40 to +90°C. Input voltage 5-30vDC, 5.5mA @ 12vDC. Hard Anodised Aluminium Alloy Construction. Supplied with Windcom software, 9-way..
1416-PK-031
WindUltra Set-up Cable. 0.8m USB A to Micro USB. The USB cable allows power to be supplied to a MetConnect Compact Weather station and data communications for initial set-up or reconfiguration via the WindSet software. Cable is not weatherproof and should not be used once units are left on site...
1435400
XP Power Isolated DC-DC Converter. Input Voltage: 9-18vDC. Output Voltage 24vDC @ 42mA. Isolation 1000vDC...
1590-PK-130/W
WindMaster Right Angled 3D Anemometer. 3-Axis Industrial - 20Hz, 50m/s, UVW, Sonic temp, symmetric, Aluminium and carbon fibre construction. Includes new transducers and firmware 'W' vertical wind component and improved sonic temperature..
17134461
Replacement Oxygen (O2) Sensor for Ventis MX4 gas detector. Range: 0 to 30% Volume, Resolution: 0.1%Vol, Response time: 15 Seconds (T50). Accuracy (at time and temperature of calibration): ±0.5% Volume (5.1-20% Volume)..
1733-PK-002
MetConnect 8-Pin M12 Connector. Screw Terminal connections for wiring cables as required. Suitable for the MetConnect Power/Comms and additional sensors...
180-160
General purpose, two-pin (12.7 mm spacing) moisture meter probe is ideal for measuring moisture in a variety of building materials. Supplied with a one metre PVC lead and BNC connector suitable for use with the 7000 Moisture Meter..
18106765
SP6 Motorized Sampling Pump Module...
1957-10-065
MaxiMet 1.8 Metre RS232 to USB converter including 5vDC power and communication configuration cable (9 way MaxiMet connector fitted one end and USB connector at the other end). Simplifies the connection of the MaxiMet units to a PC..
1957-PK-155
1.8m M12 to USB Configuration Cable for the Maximet Marine, GMX560, Weather Stations. Configuration cable provides 5V power to the Maximet and allows for an RS232 Connection to a PC for the initial set up and configuration. GMX should be in Safe Mode to allow for configuration and the adaptor..
20/20-005
Stainless Steel Tilt Mount for the 20/20 Mini Series Flame Detectors. Allows detector to be rotated up to 60° in any direction. Weight 370g. Supplied with screws and washers for detector mounting to bracket. 3 fixing holes (5.2mm diameter) for wall mounting...
2000-AMM
AP-2000 Ammonium Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-8,999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). Probe will also monitor Ammonia when used in combination with pH and temperature readings on the AP-2000 Aquaprobe sensor..
2000-CAL
AP-2000 Calcium Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-1,999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). Minimum Level of Detection 0.05 ppm. The 2000-CAL is designed for use with the AP-2000 Aquaprobe sensor with pH probe...
2000-CHL
AP-2000 Chloride Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-8,999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). The 2000-CHL is designed for use with the AP-2000 Aquaprobe sensor..
2000-CPHYLL
AP-2000 Chlorophyll Electrode with 2 Auto-Range scales 0-99.99 µg/L or 100-500 µg/L. Minimum Level of Detection 0.1 µg/L, Minimum Level of Repeatability 5.0 µg/L...
2000-FLU
AP-2000 Fluoride Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). Minimum Level of Detection 0.05 ppm. The 2000-FLU is designed for use with the AP-2000 Aquaprobe sensor with pH probe. Readings may be affected by Hydroxide ions...
