AC-RSCT-12CM
Rogowski coil 12 cm / 4.72 inches diameter..
AP-2000-PACKAGE-BT
The AP-2000 Aquaprobe Package, AP-2000-PACKAGE-BT, contains: Bluelink Adaptor; Aquaprobe AP-2000 Probe, supplied with Optical Dissolved Oxygen, Conductivity, pH, ORP, TDS, SSG, Resistivity, Salinity, and Temperature sensors; a 3m tough Cable with Connectors at both ends; Calibration Solutions; and various accessories all supplied in a Rugged Carry Case. The AP-2000 includes..
AP-5000-PACKAGE-BT
The AP-5000 Aquaprobe Package, AP-5000-PACKAGE-BT, contains: Bluelink Adaptor; Aquaprobe AP-5000 Probe, supplied with Optical Dissolved Oxygen, Conductivity, pH, ORP, TDS, SSG, Resistivity, Salinity, and Temperature sensors; a 3m tough Cable with Connectors at both ends; Calibration Solutions; and various accessories all supplied in a Rugged Carry Case. The AP-5000 includes..
AP-6000-PACKAGE-BT
The AP-6000 Aquaprobe Package, AP-6000-PACKAGE-BT, contains: Bluelink Adaptor; Aquaprobe AP-6000 Probe, supplied with Optical Dissolved Oxygen, Conductivity, pH, ORP, TDS, SSG, Resistivity, Salinity, Water Depth and Temperature sensors; a 3m tough Cable with Connectors at both ends; Calibration Solutions; and various accessories all supplied in a Rugged Carry Case. The..
AP-700-PACKAGE-BT
The AP-700 Aquaprobe Package, AP-700-PACKAGE-BT, contains: Bluelink Adaptor; Aquaprobe AP-700 Probe, supplied with Galvanic Dissolved Oxygen, Conductivity, pH, ORP, TDS, SSG, Resistivity, Salinity, and Temperature sensors; a 3m tough Cable with Connectors at both ends; Calibration Solutions; and various accessories all supplied in a Rugged Carry Case. The Galvanic DO..
AP-7000-PACKAGE-BT
The AP-7000 Aquaprobe Package, AP-7000-PACKAGE-BT, contains: Bluelink Adaptor; Aquaprobe AP-7000 Probe, supplied with Optical Dissolved Oxygen, Conductivity, pH, ORP, TDS, SSG, Resistivity, Salinity, Water Depth and Temperature sensors; a 3m tough Cable with Connectors at both ends; Calibration Solutions; and various accessories all supplied in a Rugged Carry Case. The..
AP-800-PACKAGE-BT
The AP-800 Aquaprobe Package, AP-800-PACKAGE-BT, contains: Bluelink Adaptor; Aquaprobe AP-800 Probe, supplied with Galvanic Dissolved Oxygen, Conductivity, pH, ORP, TDS, SSG, Resistivity, Salinity, Optical Turbidity and Temperature sensors; a 3m tough Cable with Connectors at both ends; Calibration Solutions; and various accessories all supplied in a Rugged Carry Case...
ATM/NC Level Transmitters for Corrosive Media
The ATM/NC is a level transmitters for corrosive media with 0-5/10vDC or 4-20mA outputs...
B-563
20 channel input terminal, Multi-Input type. Suitable for the GL860 data logger...
Battery Chargers – for 12V and 24V Lead Acid Batteries
We supply a wide range of mains battery chargers suitable for charging 12V and 24V lead acid batteries, with spade or croc clip connectors..
Bulkhead Connectors
Robust, universal circular connectors for allowing external connections to enclosures. Protection class: IP67...
CA-12/0030D
Solar Mounting Kit for two 30W Ameresco Solar Panel U-bolts are required for pole mounting..
CCDDT-2T-LOADCAP
Spherical Load Cap for CCDDT Load Cells. Capacity up to 2 Tonnes. Dimensions: Diameter 31mm, Height 10mm, Internal Radius 30mm..
CHP1 Pyrheliometer
The CHP1 pyrheliometer is the most commonly use radiometer for the measurement of direct solar radiation. The CHP1 consists of a thermopile detector and two temperature sensors. The CHP1 will produce a maximum output of 25mV under normal atmospheric conditions. The pyrheliometer needs to be pointed at the sun at..
CL11
CL11 Multi-Parameter Meter with an integrated sensors and LED display. Measuring range: -20 to +60°C & 0 to 100%RH, 0 to 5000ppm. The CL11 has an internal memory for up to 40,000 data points CL11 is powered by an AC Mains Adaptor. IP30 housing, dimensions 157 x 120 x 45mm...
CVF 4 Ventilation Unit
The CVF4 Ventilation unit is a low maintenance ventilation unit with a fan and inlet filter that provides a flow of clean air over the dome of a radiometer. The integrated heater allows the air to be warmed when necessary. The fan of the CVF4 runs continuously to reduce dust..
DC to DC Converter with Screw Terminals
The SD-15X are single output panel-mount isolated DC/DC Converter Modules supplied in a well ventilated metal casing. This DC to DC converter can be used to converter a 9-72vDC power supply to a 5vDC, 12vDC or 24vDC power supply. Ideal applications are for converting a 12V solar panel, battery bank..
EL-PDF-1-001
EasyLog PDF Temperature Logger for Chilled Goods. Temperature Range: -30 to +60°C. Alarm Thresholds: Low: +2°C; High +8°C. Logging Interval: 10 Mins, Internal Memory: 32,600 readings (220 days logging). Battery Life: 12 Months. Start/Stop and Status button to light LEDs in the event of any alarm conditions. No software required...
F.Core Flow Sensor
The F.Core Flow Sensor is a compressed air flow meter that provides a local display with switchable outputs, analogue signal or IO-Link connection. The flow meter fits inline with ½", ¾" or 1" BSP female threaded ports and works with Compressed air, Helium, Argon, Nitrogen, or Carbon Dioxide. The sensor..
FS5704CV-5
Liquid flow switch with PVC wires, 1/4 inch NPT female connection, stainless steel body with viton seals. SPDT switch 0.3 amps at 120 VAC, operating temperature -40 to 105 deg C. Adjustable flow range set point at 0.5lpm to 2lpm..
FS6204CV-1
Miniature Gas Adjustable flow switch with 1/4 inch NPT connection. 316 Stainless Steel, adjustable flow range 30 sccm to 10 slpm..
FS6704CV-1
Miniature Liquid Adjustable flow switch with 1/4 inch NPT connection. 316 Stainless Steel, adjustable flow range 0.5ml/min to 400ml/min..
GS-CO2 Space Mounted CO2 Transmitters
The GS-CO2 is a non-dispersive infrared sensor for measuring CO2 concentrations in controlled spaces. The GS-CO2-S is designed for use in indoor spaces to monitoring Carbon Dioxide levels using a microprocessor based electronics and a unique self calibration algorithm to improve long term stability and accuracy. It is ideal to..
HC2A-IC402-A
HygroClip 2. HC2A-IC402-A Industrial Cable Mounted Probe. Range 0-100%RH and -100 to +200°C, Accuracy ±0.8% RH, ±0.1°C. 15mm diameter (25mm Handle) PPS Probe with Stainless Steel 1.4301 tip with Hygromer HT-1 Sensor, 384mm (428mm with filter carrier) probe length and 2m cable to a 7 pin UART interface...
