The STALC3 submersible load cell is designed for use in fully submerged in water, or oil, at pressures up to 700 Bar. These load cells are ideal for measuring sheer strength of core samples in triaxial chambers.The load cells have a pressure compensating system, incorporated within its design, there is no change in zero or sensitivity when the STALC3 load cell is subjected to external pressure changes. Plus, the STALC3 also features accurate temperature compensation, excellent accuracy and stability, which is essential for the type of long term testing applications in which they are used. The standard 75mm diameter STALC3 submersible load cell is available in ranges from 0-1kN to 0-100kN, with ranges up to 250kN offered in the same design with a 120mm diameter body. The STALC3 can be used to measure tension if required; for capacities up to 5kN tension loads up to the cell’s rated capacity can be applied.
Products available below, or contact us for more options and pricing.
The STALC3 Series of submersible load cells have been designed to measure compressive loads in fully submersible applications in water with pressures up to 70 Bar. Primarily they are used in triaxial chambers and can be retrofitted into existing triaxial chambers or installed into new ones. Triaxial chambers are pressurised chambers used for testing the shear strength of core samples taken from the earth. These provide a direct measurement of the axial compression load applied to the sample under test. The load cells feature an internal pressure compensating system, which eliminates zero or sensitivity changes when the load cell is subjected to externa pressure changes. The use of specially selected heat treated stainless steel and precision strain gauges ensure optimum performance and excellent long term stability.
| Standard Capacities (kN): | 0-1, 0-3, 0-5, 0-10, 0-25, 0-50, 0-100 |
| Sensitivity: | 2mv/V Nominal (1.4 nominal on 1kN) |
| Zero Balance/Offset: | <±1% Rated Output |
| Output Symmetry: | <0.5% Rated Output |
| Non-Linearity: | <±0.05% Rated Output |
| Hysteresis: | <±0.1% Rated Output |
| Repeatability: | <±0.05% Rated Output |
| Input Resistance: | 750 Ohms Nominal |
| Output Resistance: | 700 Ohms Nominal |
| Excitation Voltage: | 10vDC Recommended (2-15vDC Acceptable) |
| Operating Temperature: | +5 to +50°C |
| Compensated Temperature: | +10 to +50°C |
| Storage Temperature: | -10 to +70°C |
| Safe Overload: | 150% of Rated Capacity |
| Ultimate Overload: | 300% of Rated Capacity |
| IP Rating: | IP68 submersible up to 70 Bar |
| Fatigue Life: | 108 Cycles Typical (109 cycles on fatigue-rated version) |
| Cable: | 3m, 4-Core Screened, PUR Sheath |
| Construction: | Stainless Steel with Nitrile |
TR150
£442.00
TR150-CASE
£35.00
DSC-USB
£302.00
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
