Omni Instruments can provide SCS certificates for all of the MiniAir and ThermoAir ranges of anemometers. We can provide initial calibrations on brand new devices and also a recalibration service for any MiniAir and ThermoAir units returned to us for recalibration. Calibration can be done with air velocities of 0-50m/s, although the maximum speed will be dependant on the individual probes. Calibrations are completed according to ISO17025 by our calibration house.
Our Calibration House is accredited by the Swiss accreditation body (SCS0046) for the following measuring ranges:
Air speeds from 0.1m/s to 50m/s (± 1.0% but not less than 0.01 m/s)
Volume flow from 50m³/h to 25,000m³/h (at 1.5% deviation)
Pressure from -2,5000Pa to +25,000Pa (0.02% but not less than 0.1 Pa)
ISO/IEC 17025:2017 / SN EN ISO/IEC 17025:2018
During calibration, the deviation between the measured actual value of a measuring device and the target value of the reference is determined under precisely defined environmental conditions. The identified deviations and results are precisely documented. With the help of calibration, compliance with quality can be guaranteed.
During the adjustment, the measurement deviations determined from the calibration are corrected so that the deviation of the measurement from the target value is as small as possible and is within the measurement tolerance.
The calibration house is accredited under the number SCS046 by Swiss Accreditation Service (SAS) who are member of ILAC (International Laboratory Accreditation Cooperation). This is guaranteeing the acknowledgment of our measuring device as a reference in more than 130 countries
CAL-SCS-ANEMOMETER
£424.63
CAL-SCS-ANEMOMETER-ADD
£63.56
CAL-SCS-THERMOAIR
£540.38
CAL-SCS-THERMOAIR-ADD
£63.56
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
