MX52 is a modular control panel for up to 16 channels. The MX52 connects to the OLC, CEX and CTX ranges of gas detectors, plus any other 4-20 mA device can be monitored and controlled. The unit is an alarm/display unit with fixed or scrolling display, 3 programmable alarm thresholds per channel, fault alarm, analogue and serial outputs.
MX 52 controller accepts inputs from flammable (4-20 mA transmitter or catalytic bridge types) and toxic gas detectors. The MX 52 modular design allows you to build your own gas detection system to meet your requirements.
The innovative features of the MX 52 are integrated into a 3U 19” rack frame for use in a variety of applications. The MX 52 can be programmed either through the keyboard or by an external PC.
Each of the 16 channels performs the following:
| Type: | Wall mounted controller |
| Function: | Microcontroller-based multichannel monitor |
| Capacity: | 8 cards, 2 independent channels each (max 16 channels) |
| Display: | Fluorescent 2 lines 16 fixed or scrolling characters |
Alarms
| Fault alarms: | System functioning normally Faulty interface link Faulty detector Faulty microcontroller Specific channel identification with yellow LED Common fault relay |
| Gas alarms: | 3 independent thresholds per channel Third threshold delayed or averaged Automatic or manual reset Programmable increasing or decreasing alarm Visual red LED Relay output per channel (alarm 1 and 2), common relay on alarm 3 |
| Audible alarm: | 80 dB at 30cm |
| Outputs:
|
2 independent gas alarm relays per channel (2 A – 250 VAC Rating for resistive load) 1 common gas alarm 3 relay or common audible alarm transfer (programmable) 1 common fault relay Programmable positive or negative safety on alarm relays Fail safe on fault Programmable NC or NO output on alarm 1, alarm 2 and fault alarm, SPDT on alarm 3 |
Inputs
| Type of detectors: | Flammable detector bridge type Oxygen, toxic or flammable detector 4-20 mA output, 2 or 3 wire Other detectors standard current output |
| Links: | 2 or 3 wires re-inforced cable |
| Loop impedance:
|
Flammable 3 wire : 32 Ω 4-20 mA: 2 or 3 wire – 56 Ω Average line length (in meters at 20°C for a 1,5 mm2 conductor) : – Flammable : Bridge type – 1000 m 4-20 mA – 2000 m – Power supply control per LED on each channel (power ON/OFF green LED indicator) |
| Signal output: | Analog 4-20 mA per channel Serial RS 485 or 232 MODBUS protocol |
| Power supply:
|
103 to 122 V AC or 207 to 244 VA 21 to 31 V DC Power consumption : 300 VA or 240 W |
Miscellaneous:
Local or remote acknowledgement
Operating temperature: -10 +45°C
Relative humidity: 5 to 95 % non condensed
In compliance with European standards 50054, 50081 and 50082Dimensions:
Rack 3U, 19” frame
Dimensions : 482 w x 132 h x 266 d in mmWeight:15 Kgs
W52I010
£2,180.00
W52O020
£2,180.00
W52O02I
£2,320.00
6451441
£595.00
6451442
£595.00
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
