The HC2A-USB converts a PC into a temperature and humidity measurement system. The HC2A-USB provides a simple PC based temperature and humidity monitoring system, ideal for residential or office rooms. It is based on the AirChip3000 technology and is connected via a USB compatible interface cable directly to a PC running the HW4 software.
The HygroWin USB set combines the HC2A-S probe with a simple USB interface. The probe is easily connected to a PC via any USB port via the AC3001 active USB cable, which also provides power to the sensor. Using the HW4 software, accurate measurements can be obtained with real-time display of temperature and humidity values. Alarms, charting and full data logging functions are included. Measured values are easily recorded with a time stamp, a requirement of Quality Management Systems. The software also allows the probe to be easily calibrated and adjusted via the PC interface.
The HygroWin is delivered factory-calibrated ready for use after installing the HW4 software.
Monitoring of offices, laboratories, server rooms, workshops, classrooms, incubators, chambers, store rooms, cold stores, production areas, wine stores, humidors, living spaces and test facilities.
| Measuring Range | -40 to +85°C, 0-100%RH |
| Accuracy | ±0.3°C / ±2%RH(@ 23°C) |
| Cable Length | 2.8m |
| Probe Dimensions | 108mm length, 15mm diameter. |
| Connection | USB |
| Power Supply | Via AC3001 Active USB cable |
The HC2A-USB package consists of the HC2A-S probe and AC3001 Active USB cable.
HC2A-USB
£340.00
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
