The GENII wireless temperature and relative humidity monitoring system is able to cover a wide range of temperature and humidity monitoring applications. Transmitters are available with integrated temperature, temperature & RH sensors or with sockets for connecting thermistor, thermocouples and PT100 temperature sensors. A system can be customised to your requirements, with battery powered transmitters available to cover virtually any type of environmental condition, including both indoor and outdoor installations. All the transmitters can be linked up to a GEN II receiver unit to provide analogue or Modbus outputs or to log the readings directly. Up to 250 channels can be sent back to a single receiver unit over a 2-3Km range, with repeaters available to extend this range and deal with more difficult environments. The receiver will read the data from only the desired transmitters in range and multiple systems can be installed in one location to provide all the parameters into an easy to use format for data analysis.
The Wireless Temperature & Relative Humidity Monitoring System
The GEN II wireless data logging system combines exceptional performance and stylish products ideally suited for a wide range of applications and installations. The system is also ideal for short and long term projects. Since no cables are used there is a great deal of freedom to change the placing of sensors or move the complete system to another site, as and when your requirements change. Transmitters can easily installed and can be placed anywhere and easily redeployed as necessary.
The GENII transmitters connect to the receiver units by means of a 434MHz radio link. The 434MHz UHF band is licence exempt in most countries, making this a very cost effective and practical alternative to wired or cabled-in systems. Sensors and their associated radio transmitters are simply placed or permanently fitted as required once a radio connection has been established.
Radio lends itself ideally to installations where communications across a river, road or even just a large site need to be established quickly and effectively. Using high specification radio means a range of several kilometers, reducing to several hundred meters in difficult environments (such as a brick or stone building or one containing considerable steel work).
Transmitter units are available with integrated temperature and/or relative humidity sensors to allow units to be placed in the required locations. Transmitters are also available with sockets suitable for connecting external thermistor, thermocouples (K, T, N & R Type) and PT100 temperature probes. Transmitters are battery operated using off the shelf batteries providing up to 2 years operation.
The GEN II system has three options for receiver units.
The receiver unit allow data to be connected directly to a PC, Modbus network, Ethernet or via a GSM/GPRS modem. Receiver units include an internal battery to provide back up for power failures. Multiple receiver units can be used in the same location and each unit can log the readings from specific transmitters, whilst ignoring others. Transmitters can be read by more than one receiver unit allowing readings to connect to a Modbus network and be logged or retransmitted by each receiver.
Features
The GEN II system can also integrated seamlessly with energy meters (electrical, gas etc.) and provide these readings, along with environmental parameters such as wind speed, wind direction, precipitation, air pressure, water depth, tilt and linear displacement back to a single logging unit. Please see the GEN II Wireless Energy and Environmental Monitoring System page on our website for available transmitters.
WSR-8V
£695.00
WSR-8C
£695.00
WSR-16V
£995.00
WSR-16C
£996.22
RX250-AL
£1,175.00
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
