The ETW is a wired lift link load cell suitable for inline cable tension monitoring. The load cell is supplied as a complete calibrated system with a TR150 handheld digital indicator and 10m connecting cable with locking connector. The ETW Lift link load cell system come in a hard plastic carrying case as standard and can be supplied with either bow or D Shackles. Ranges are available from 0-1 Tonne up to 0-100 Tonnes with a ±0.25% of rated output.
The ETW replaces the previous ETO Wired Lift Link,
The ETW series of wired Lift Link Load Cells has been specifically developed for the measurement of cable tension and under hook crane/lifting gear weighing. The weight and overall height of the ETW series is much lower than that offered by other manufacturers, therefore reducing the overall headroom required for the installed system. The ETW is environmentally sealed to IP65 to give excellent waterproofing properties for use outside in arduous conditions. During operation the ETW link is connected via screen cable to the TR150 battery powered display. The system is supplied calibrated in the required engineering units and is simple to operate using the five front panel keys. 1 or 2 channel versions are available which enables the system to read in different engineering units i.e. lbs/kg, Tonnes/kN, if required. Readout in tonnes only is standard.
| Standard Capacities: |
0-1, 0-2, 0-5, 0-12, 0-25, 0-50, 0-100 Tonnes |
| Accuracy: | <±0.25% Rated Output |
| Operating Temperature: | -10 to +50°C |
| Safe Overload: | 150% of Rated Capacity |
| Ultimate Overload: | 500% of Rated Capacity |
| Safety Factor: | 5:1 |
| IP Rating: | IP65 |
| Cable: | 15m cable with Locking Connector |
| Construction: | Anodised Aluminium Alloy |
| Capacity (Tonnes) |
A | B |
C |
ØD | E | Weight | Specifications | TR150 | |
| 0-1 | 137 | 105 | 41.5 | 30 | 193 | 1.5Kg | Display: | 7-digit LCD (±9999999) 10.2 mm high) | |
| 0-2 | 137 | 105 | 41.5 | 30 | 193 | 1.5Kg | Resolution: | 1:250K @ 1Hz update, 1:65K @ 10Hz update. | |
| 0-5 | 137 | 105 | 41.5 | 30 | 193 | 1.5Kg | Accuracy: | <0.005% Full Scale | |
| 0-12 | 149 | 105 | 41.5 | 38 | 239 | 2.0Kg | Operating Temperature: | -10 to +50°C | |
| 0-25 | 160 | 125 | 55 | 53 | 284 | 4.5Kg | Internal Battery: | 2 x AA Alkaline (Rechargeable Optional) | |
| 0-35 | 175 | 138 | 55 | 60 | 335 | 5.5Kg | Battery Life: | 40 Hours (with 350Ohm sensor) | |
| 0-50 | 198 | 150 | 75 | 73 | 375 | 10.0Kg | Keypad: | Tactile with rim embossed keys | |
| 0-100 | 275 | 220 | 120 | 100 | 500 | 28.0Kg | Weight: | 260g |
TEDS Chip option will allow the TR150 display to be replaced, without the need for configuration or calibration.
TR150
£442.00
TR150-CASE
£35.00
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
