The DBBSM series loadcells are a miniature S beam, bi-directional load cell suitable for tension and compression applications. Loadcells are available with a bi-directional range of 1Kgf up to 30,000Kgf with a standard 2.7mV/V (2mV/V above 10,000Kgf) output and accuracy of 0.03%. Units can be supplied with suitable inline amplifiers to provide a calibrated 4-20mA output.
The DBBSM series ‘S-beam load cell’ is designed for force measurement and weighing applications alike and can be used for tension and compression measurements. It’s ease of mounting makes it very attractive for use as a general purpose load cell. The DBBSM is a miniature version of the DBB Series load cells and ideal for applications where space is limited.
| Standard Capacities (Kgf): | 0-1, 0-2, 0-5, 0-10, 0-25, 0-50, 0-100, 0-250, 0-500, 0-1,000, 0-2,500, 0-5,000, 0-10,000, 0-20,000, 0-30,000 |
| Sensitivity: | 2.7mv/V Nominal (2.0m/V nominal on units above 10,000Kgf |
| Zero Balance/Offset: | <±1.0% Rated Output |
| Non-Linearity: | <±0.03% Rated Output |
| Hysteresis: | <±0.03% Rated Output |
| Repeatability: | <±0.02% Rated Output |
| Input Resistance: | 375 Ohms Nominal |
| Output Resistance: | 350 Ohms Nominal |
| Insulation Resistance: | >5000 @ 50vDC |
| Excitation Voltage: | 10vDC Recommended (2-15vDC Acceptable) |
| Operating Temperature: | -20 to +80°C |
| Compensated Temperature: | 0 to +70°C |
| Storage Temperature: | -20 to +80°C |
| Safe Overload: | 150% of Rated Capacity |
| Ultimate Overload: | 300% of Rated Capacity |
| Maximum Safe Side Load: | 30% of Rated Capacity |
| IP Rating: | Standard IP51, IP67 available on request |
| Fatigue Life: | 108 Cycles Typical (109 cycles on fatigue-rated version) |
| Cable: | 3m, 4-Core Screened, PUR Sheath ¶Ø5 nominal |
| Construction: | 1-100Kg: Aluminium Alloy, 250-30,000Kg: Stainless Steel |
Note: Load cells with capacities over 10,000Kg will have rounded shoulders.
| Capacity | H | L | ¶W | W1 | G | G1 | Threads T | Weight |
| 0-1, 0-2, 0-5, 0-10, 0-25Kgf | 60 | 48 | 12.7 | 20 | 30 | 6.35 | M8 x 1.25 | 85g |
| 0-50, 0-100Kgf | 70 | 48 | 18 | 25 | 35 | 9 | M8 x 1.25 | 140g |
| 0-250Kgf | 70 | 48 | 18 | 25 | 35 | 9 | M8 x 1.25 | 330g |
| 0-500Kgf | 75 | 48 | 30 | 37 | 37.5 | 15 | M12 x 1.75 | 560g |
| 0-1,000Kgf | 75 | 48 | 30 | 37 | 37.5 | 15 | M12 x 1.75 | 580g |
| 0-2,500Kgf | 90 | 63 | 38 | 38 | 45 | 8 | M16 x 2.0 | 1.33Kg |
| 0-5,000Kgf | 90 | 63 | 38 | 38 | 45 | 8 | M16 x 2.0 | 1.35Kg |
| 0-10,000Kgf | 145 | 138 | 55 | N/A | 72.5 | 27.5 | M30 x 2.0 | 6.0Kg |
| 0-20,000Kgf | 190 | 190 | 75 | N/A | 95 | 37.5 | M45 x 3.0 | 25Kg |
| 0-30,000Kgf | 190 | 190 | 75 | N/A | 95 | 37.5 | M45 x 3.0 | 25Kg |
The optional load buttons and rod end bearings are designed to align forces through the principle axis of the load cell, reducing the effects of extraneous forces. Load Buttons are used for compressive forces and Rod End Bearings are used for tensile forces.
LOADBUTM8X1.25
£68.00
RODENDM8X1.25
£37.00
RODENDM12X1.75
£41.00
RODENDM16X2.0
£52.00
RODENDM30X2.0
£104.00
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
