AquaProbe Lite BlueLink Package includes the BlueLink Device, AP-LITE Probe, Sleeve End Cap, One pre-fitted mounting nut, Getting started card for quick reference and a Pot of Silicone Grease, a 3 meter cable and various accessories all supplied in a Rugged Carry Case. The AP-LITE probe features optical sensor socket and rugged AquaConn connector, but to complete your system, you will need an Optical Electrode.
£1,740.00
The AP-LITE Package BT features the single parameter probe in a rugged carry case with the BlueLink Device, AP-LITE probe, 3m extension cable and other accessories. The only missing bit is the Optical Electrode for the parameter you want to monitor. The BlueLink package allows users to connect wirelessly to a smartphone or tablet (using the Aquaprobe app), transforming the device into a smart water quality monitoring system. This package is perfect for fieldwork where real-time data viewing, logging, and GPS tagging are essential, making it an ideal choice for efficient, modern water quality assessment across various applications.
The AP-LITE is a simple probe with a single optical socket and an integrated temperature sensor. This socket is able to house any one of the optical electrodes in the table below, links to get more details on the parameter for each probe.
| Turbidity | Range | 0 – 4000 NTU |
| Resolution | 2 Auto-range scales: 0.0 99.9 NTU, 100 – 4000 NTU | |
| Accuracy | ±5% of reading | |
| Chlorophyll | Range | 0 – 500 µg/L (ppb) |
| Resolution | 2 Auto-range scales: 0.0 99.99 µg/L, 100. – 500.0 µg/L | |
| Repeatability | ±5% of reading | |
| Phycocyanin (Freshwater Blue-Green Algae) |
Range | 0 – 300,000 cells/mL |
| Resolution | 1 cell/mL | |
| Repeatability | ±10% of reading | |
| Phycoerythrin (Marine Blue-Green Algae) | Range | 0 – 200,000 cells/mL |
| Resolution | 1 cell/mL | |
| Repeatability | ±10% of reading | |
| Rhodamine WT Dye | Range | 0 – 500 µg/L (ppb) |
| Resolution | 2 Auto-range scales: 0.0 99.99 µg/L, 100. – 500.0 µg/L | |
| Repeatability | ±5% of reading | |
| Fluorescein Dye | Range | 0 – 500 µg/L (ppb) |
| Resolution | 2 Auto-range scales: 0.0 99.99 µg/L, 100. – 500.0 µg/L | |
| Repeatability | ±5% of reading | |
| Refined Oil | Range | 0 – 10,000 µg/L (ppb) |
| Resolution | 0.1 µg/L | |
| Repeatability | ±10% of reading | |
| CDOM/FDOM | Range | 0 – 20,000µg/L (ppb) (Quinine Sulphate) |
| Resolution | 2 Auto-range scales: 0.0 – 9,999.9µg/L, 10,000 – 20,0000µg/L | |
| Repeatability | ±10% of reading |
Fluorescence measurement techniques are not ideal for quantitative measurement and it is therefore impossible to specify an absolute accuracy. The accuracy figures quoted above represent the equipment’s capability at the calibration points at 25°C. In order to obtain accurate results, data obtained with a fluorescent electrode in the field must be post-calibrated with data from standard laboratory analysis of grab samples acquired during the study.
To fit an Electrode, first remove the sleeve from the AP-Lite by unscrewing at the blue split-line. Apply a small amount of silicone grease (supplied with the AP-Lite) to the threaded section and the O-ring of the AUX Electrode (see photograph). ENSURE NO GREASE IS APPLIED TO THE GOLD CONTACTS. Use a clean cloth or tissue paper, polish the gold contacts ensuring they are completely clean. Carefully insert the electrode into the socket and tighten firmly by hand until the O’ring is completely compressed. Do not over-tighten or use any tool (such as pliers). After fitting the Electrode, replace the Sleeve and ensure the Sleeve End Cap is fitted.
Once a new electrode is fitted it is essential to carry out a full two-point calibration prior to use. Calibration solutions are available with the relevant optical electrode. The carry case has space to hold suitable calibration solutions
EX-2000/LITE-10M
£290.00
AP-LITE
£825.00
AP-Lite Optical Electrodes
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
