omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Edit Content
Need Help?

Water Quality Meters

Edit Content

AquaTel Telemetry Aquaprobe

Aquatel is a Smart telemetry device designed to simplify setup, lengthen deployment and optimise data management. Constructed with carbon fibre and aluminium, it features a long battery life and 4G modem communications. It houses a GPS receiver for location. Dissolved Oxygen or Water Level Measurement sensors can be used with ...
View Product

Bluetooth Bluelink Aquaprobe Device

Bluelink-Probe is a Bluetooth-enabled device, with a rechargeable battery, designed to replace the Aquameter in portable monitoring setups. Connecting directly to the Aquaprobe cable, it interfaces with a dedicated Bluelink app that provides functionalities for real-time data viewing, sensor calibration, socket assignment for probes with additional sensors, and automated data ...
View Product
AquaPlus Package. Dissolved Oxygen

AquaPlus Package

The AquaPlus probe is a combined optical dissolved oxygen, electrical conductivity and temperature sensor. Thanks to the built in conductivity sensor, the AquaPlus is able to calculate and automatically compensate DO readings for changes in water salinity. It's compact, robust and highly accurate. It also requires very little maintenance to ...
View Product
AP-Lite Aqua Probe Package

AP-Lite Aquaprobe Package

The pocket sized Aquaprobe is designed to measure a single parameter, it consists of a small body with an optical electrode socket. Each sensor can be connected to any one of 8 of the optical electrodes available, which can be simply connected and disconnected as required. Available electrodes cover Turbidity, ...
View Product
AP-2000 Aquaprobe Package

AP-2000 Aquaprobe Package

The AP-2000 Aquaprobe packages are the smaller of the advanced portable multi-parameter water monitoring probes.The AP-2000 comes pre fitted probes covering pH, ORP, Conductivity, TDS, SSG, Resistivity, Salinity, Dissolved Oxygen and Temperature probes, the AP-2000-D add a depth sensor. Each probe comes with two empty sockets to added an optical, ...
View Product

AP-5000 Aquaprobe Package

The AP-5000 Aquaprobe packages of the advanced portable multi-parameter water monitoring probes. The AP-5000 comes pre fitted probes covering pH, ORP, Conductivity, TDS, SSG, Resistivity, Salinity, Dissolved Oxygen, Depth and Temperature probes. The AP-5000 features four empty sockets that aren't restricted like the AP-2000 package. The probes are constructed from ...
View Product

AP-6000 Aquaprobe Package

The AP-6000 Aquaprobe package includes a self cleaning mechanism to clear all of the monitoring probes of dirty build up. The AP-6000 comes pre fitted probes covering pH, ORP, Conductivity, TDS, SSG, Resistivity, Salinity, Dissolved Oxygen, Depth and Temperature probes. The AP-6000 features four empty sockets that aren't restricted like ...
View Product
Aquaprobe AP-7000

AP-7000 Aquaprobe Package

The AP-7000 water monitoring probe includes a self cleaning mechanism to clear all of the monitoring probes for bio-fouling and brushes each probe multiple times per cycle. The AP-7000 comes pre fitted probes covering pH, ORP, Conductivity, TDS, SSG, Resistivity, Salinity, Dissolved Oxygen, Depth and Temperature probes. The AP-7000 features ...
View Product

AquaProbe Optical Electrodes

Aquaprobe Optical Electrodes are suitable for use with the AP-Lite, AP-2000, AP-5000, AP-6000 and AP-7000 water quality sensors. These advanced optical electrodes are incredibly practical, allowing for easy, tool-free removal and replacement in the field. They're designed specifically for seamless integration with the AquaProbe sensor, to provide additional parameters to ...
View Product

AquaProbe Ion Selective Electrodes

AquaProbe Ion Selective Electrodes are suitable for use with the AP-2000, AP-5000, AP-6000 and AP-7000 water quality sensors. These advanced Ion Selective Electrodes are incredibly practical, allowing for easy, tool-free removal and replacement in the field. They're designed specifically for seamless integration with the AquaProbe sensor and utilise the pH ...
View Product
Edit Content

AquaTel Telemetry Aquaprobe

Aquatel is a Smart telemetry device designed to simplify setup, lengthen deployment and optimise data management. Constructed with carbon fibre and aluminium, it features a long battery life and 4G modem communications. It houses a GPS receiver for location. Dissolved Oxygen or Water Level Measurement sensors can be used with this device with automatic compensation for barometric pressure readings and GPS received for location data. You can set up the Aquatel remotely using sms commands ...
Read more

Bluetooth Bluelink Aquaprobe Device

Bluelink-Probe is a Bluetooth-enabled device, with a rechargeable battery, designed to replace the Aquameter in portable monitoring setups. Connecting directly to the Aquaprobe cable, it interfaces with a dedicated Bluelink app that provides functionalities for real-time data viewing, sensor calibration, socket assignment for probes with additional sensors, and automated data logging. Available with Android and IoS (pending approval) apps. ...
Read more
AquaPlus Package. Dissolved Oxygen

AquaPlus Package

The AquaPlus probe is a combined optical dissolved oxygen, electrical conductivity and temperature sensor. Thanks to the built in conductivity sensor, the AquaPlus is able to calculate and automatically compensate DO readings for changes in water salinity. It's compact, robust and highly accurate. It also requires very little maintenance to keep it that way. The slim probe is used with its very own GPS DO meter, meaning the location of every datapoint you measure is ...
Read more
AP-Lite Aqua Probe Package

AP-Lite Aquaprobe Package

The pocket sized Aquaprobe is designed to measure a single parameter, it consists of a small body with an optical electrode socket. Each sensor can be connected to any one of 8 of the optical electrodes available, which can be simply connected and disconnected as required. Available electrodes cover Turbidity, Chlorophyll a, Blue Green Algae (fresh and salt water options), Rhodamine, Fluoresceine, CDOM/FDOM and refined oil. ...
Read more
AP-2000 Aquaprobe Package

AP-2000 Aquaprobe Package

The AP-2000 Aquaprobe packages are the smaller of the advanced portable multi-parameter water monitoring probes.The AP-2000 comes pre fitted probes covering pH, ORP, Conductivity, TDS, SSG, Resistivity, Salinity, Dissolved Oxygen and Temperature probes, the AP-2000-D add a depth sensor. Each probe comes with two empty sockets to added an optical, or Ion Selective sensor (ISE). All of the probes are constructed from tough marine grade aluminium that has been hard anodised, making it suitable for ...
Read more

AP-5000 Aquaprobe Package

The AP-5000 Aquaprobe packages of the advanced portable multi-parameter water monitoring probes. The AP-5000 comes pre fitted probes covering pH, ORP, Conductivity, TDS, SSG, Resistivity, Salinity, Dissolved Oxygen, Depth and Temperature probes. The AP-5000 features four empty sockets that aren't restricted like the AP-2000 package. The probes are constructed from tough marine grade aluminium that has been hard anodised, making it suitable for use in both fresh and salt waters. ...
Read more

AP-6000 Aquaprobe Package

The AP-6000 Aquaprobe package includes a self cleaning mechanism to clear all of the monitoring probes of dirty build up. The AP-6000 comes pre fitted probes covering pH, ORP, Conductivity, TDS, SSG, Resistivity, Salinity, Dissolved Oxygen, Depth and Temperature probes. The AP-6000 features four empty sockets that aren't restricted like the AP-2000 package. The probes are constructed from tough marine grade aluminium that has been hard anodised, making it suitable for use in both fresh ...
Read more
Aquaprobe AP-7000

AP-7000 Aquaprobe Package

The AP-7000 water monitoring probe includes a self cleaning mechanism to clear all of the monitoring probes for bio-fouling and brushes each probe multiple times per cycle. The AP-7000 comes pre fitted probes covering pH, ORP, Conductivity, TDS, SSG, Resistivity, Salinity, Dissolved Oxygen, Depth and Temperature probes. The AP-7000 features six covered sockets that can be fitted with any ISE or optical probes, allowing up to 17 parameters to be monitoring by one sensor. The ...
Read more

AquaProbe Optical Electrodes

Aquaprobe Optical Electrodes are suitable for use with the AP-Lite, AP-2000, AP-5000, AP-6000 and AP-7000 water quality sensors. These advanced optical electrodes are incredibly practical, allowing for easy, tool-free removal and replacement in the field. They're designed specifically for seamless integration with the AquaProbe sensor, to provide additional parameters to your water quality monitor sensor. The Optical Electrodes cover: Turbidity; Chlorophyll; Blue Green Algae; Rhodamine; Fluorescein; Refined Oil; or CDOM/FDOM. ...
Read more

AquaProbe Ion Selective Electrodes

AquaProbe Ion Selective Electrodes are suitable for use with the AP-2000, AP-5000, AP-6000 and AP-7000 water quality sensors. These advanced Ion Selective Electrodes are incredibly practical, allowing for easy, tool-free removal and replacement in the field. They're designed specifically for seamless integration with the AquaProbe sensor and utilise the pH and temperature sensors to calculate the ion concentrations of specific charged ions in the water. The ISE sensors cover: Ammonia/Ammonium; ; Chloride; Fluoride; Nitrate; or ...
Read more

AquaTel Telemetry Aquaprobe

Aquatel is a Smart telemetry device designed to simplify setup, lengthen deployment and optimise data management. Constructed with carbon fibre and aluminium, it features a long battery life and 4G modem communications. It houses a GPS receiver for location. Dissolved Oxygen or Water Level Measurement sensors can be used with ...
View Product

Bluetooth Bluelink Aquaprobe Device

Bluelink-Probe is a Bluetooth-enabled device, with a rechargeable battery, designed to replace the Aquameter in portable monitoring setups. Connecting directly to the Aquaprobe cable, it interfaces with a dedicated Bluelink app that provides functionalities for real-time data viewing, sensor calibration, socket assignment for probes with additional sensors, and automated data ...
View Product
AquaPlus Package. Dissolved Oxygen

AquaPlus Package

The AquaPlus probe is a combined optical dissolved oxygen, electrical conductivity and temperature sensor. Thanks to the built in conductivity sensor, the AquaPlus is able to calculate and automatically compensate DO readings for changes in water salinity. It's compact, robust and highly accurate. It also requires very little maintenance to ...
View Product
AP-Lite Aqua Probe Package

AP-Lite Aquaprobe Package

The pocket sized Aquaprobe is designed to measure a single parameter, it consists of a small body with an optical electrode socket. Each sensor can be connected to any one of 8 of the optical electrodes available, which can be simply connected and disconnected as required. Available electrodes cover Turbidity, ...
View Product
AP-2000 Aquaprobe Package

AP-2000 Aquaprobe Package

The AP-2000 Aquaprobe packages are the smaller of the advanced portable multi-parameter water monitoring probes.The AP-2000 comes pre fitted probes covering pH, ORP, Conductivity, TDS, SSG, Resistivity, Salinity, Dissolved Oxygen and Temperature probes, the AP-2000-D add a depth sensor. Each probe comes with two empty sockets to added an optical, ...
View Product

AP-5000 Aquaprobe Package

The AP-5000 Aquaprobe packages of the advanced portable multi-parameter water monitoring probes. The AP-5000 comes pre fitted probes covering pH, ORP, Conductivity, TDS, SSG, Resistivity, Salinity, Dissolved Oxygen, Depth and Temperature probes. The AP-5000 features four empty sockets that aren't restricted like the AP-2000 package. The probes are constructed from ...
View Product

AP-6000 Aquaprobe Package

The AP-6000 Aquaprobe package includes a self cleaning mechanism to clear all of the monitoring probes of dirty build up. The AP-6000 comes pre fitted probes covering pH, ORP, Conductivity, TDS, SSG, Resistivity, Salinity, Dissolved Oxygen, Depth and Temperature probes. The AP-6000 features four empty sockets that aren't restricted like ...
View Product
Aquaprobe AP-7000

AP-7000 Aquaprobe Package

The AP-7000 water monitoring probe includes a self cleaning mechanism to clear all of the monitoring probes for bio-fouling and brushes each probe multiple times per cycle. The AP-7000 comes pre fitted probes covering pH, ORP, Conductivity, TDS, SSG, Resistivity, Salinity, Dissolved Oxygen, Depth and Temperature probes. The AP-7000 features ...
View Product

AquaProbe Optical Electrodes

Aquaprobe Optical Electrodes are suitable for use with the AP-Lite, AP-2000, AP-5000, AP-6000 and AP-7000 water quality sensors. These advanced optical electrodes are incredibly practical, allowing for easy, tool-free removal and replacement in the field. They're designed specifically for seamless integration with the AquaProbe sensor, to provide additional parameters to ...
View Product

AquaProbe Ion Selective Electrodes

AquaProbe Ion Selective Electrodes are suitable for use with the AP-2000, AP-5000, AP-6000 and AP-7000 water quality sensors. These advanced Ion Selective Electrodes are incredibly practical, allowing for easy, tool-free removal and replacement in the field. They're designed specifically for seamless integration with the AquaProbe sensor and utilise the pH ...
View Product

Contact us

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.

A real person will answer the phone and deal with your enquiry
Sales & Technical support

We are here to help

Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

Call us on +44 (0)1382 443000

Enquire now