TM2U – AC Voltage Isolated Transducer – RMS
A DIN rail mounting electronic transducer to measure single phase alternating voltage circuit and provide a proportional DC analogue output signal. The TM2U is a self-supplied unit...
RI-TV Series Isolated True RMS Voltage Transducer
A DIN Rail mounted voltage transducers suitable for converting AC and DC voltage to a proportional mA or voltage output. The TVV0010 is powered by a 85-265vAC mains supply and TVV0040 is powered by 10-36vDC with a full range of selectable AC voltage inputs and mA or V outputs. The..
AC Voltage Sensors, Ranges 0-300 and 0-600 VAC
AC Voltage Sensors, ranges 0-300 and 0-600 VAC, for single phase AC voltage, frequency range SV300: 50 - 400 Hz, SV600: 50 - 60 Hz, accuracy 0.25 - 0.5% of full scale. Output 0-5v DC, self powered...
AC Voltage Transducers
DIN Rail mounted AC voltage transducers suitable for converting AC voltage to a proportional mA or voltage output. Options for average sensing and true RMS, plus unit for monitoring deviations in narrow bands around a specified nominal voltage. The EVCC and EVCP are average sensing RMS calibrated while the EVCR..
4179 Universal AC/DC Transmitter
The 4179 is a programmable universal transmitter suitable for converting AC voltage or current to a standard DC voltage and current signal with 2.3kV isolation. The unit is capable of measuring up to 0 to 5A RMS and 0-300V RMS directly with a narrow 500mA RMS and 500mV RMS span...
DC Voltage Transducers
DC voltage transducers measure DC voltage either directly or through a DC voltage transducer. The transducer converts the DC voltage signal to either a DC mA or DC voltage output which is directly proportional to the input signal value...
PR 5114 Programmable Transmitter
The PR 5114 is a programmable transmitter suitable for measuring DC voltage inputs up to 250vDC, current up to 100mA, PT100, Ni100 or resistance inputs. An output signal of 0-5V, 0-10V or 4-20mA is proportional and linear to the value of the input. The inputs range are fully programmable for..
3 Phase Voltage Monitor with Relay Output
The 3 Phase Voltage Monitor with Relay Output is a DIN-rail mounted protection relay designed for industrial power monitoring of 3-phase AC supplies. It provides a critical safety layer by continuously monitoring for voltage level deviations, phase sequence errors, and phase failure. Upon detecting a fault, the unit triggers its..
TM8P – Programmable Isolated Transducer – True RMS
A DIN rail mounting electronic transducer to measure single phase, three phase three wire and three phase four wire circuits and provide a proportional DC analogue output signal. The TM8P is available with 230vAC, 115vAC and 20150vDC auxiliary supply..
QA-POWER-M Single Phase Network Power Analyser and Data Logger
Single phase network power analyser with TRMS (true RMS) function. USB configurable, with 4-way galvanic isolation The input range is 1000vDC / 600vAC, 10A AC/DC or up to 800A with additional CT, with universal power supply AC/DC, programmable alarm contact, RS485 Modbus output, and a 4-20mA / 0-10v DC output....
