The HS-556 Signal Conditioner is used with a 100mV/g constant current type accelerometer and provides a 4-20mA output suitable for direct input to a vibration monitoring PLC. The 4-20mA output is proportional to true RMS velocity in mm/s. A buffered AC output is provided via a BNC connector to enable ...
HS 510 Series Single Channel Display Trip ModuleInput 4-20mA accelerometer (HS-420 Series), Temperature. Output Pre-programmable, 2 trips, retransmit 4-20mA and 0-10 Volts. Start up Protection. ...
HS-556 Vibration Module with 4-20mA Output
The HS-556 Signal Conditioner is used with a 100mV/g constant current type accelerometer and provides a 4-20mA output suitable for direct input to a vibration monitoring PLC. The 4-20mA output is proportional to true RMS velocity in mm/s. A buffered AC output is provided via a BNC connector to enable vibration analysis using an FFT signal analyser. The unit is housed in a compact DIN-Rail mounting plastic case and operates from 24VDC at 50mA. ...
HS 500 Series – Protection System
HS 510 Series Single Channel Display Trip ModuleInput 4-20mA accelerometer (HS-420 Series), Temperature. Output Pre-programmable, 2 trips, retransmit 4-20mA and 0-10 Volts. Start up Protection. ...
The HS-556 Signal Conditioner is used with a 100mV/g constant current type accelerometer and provides a 4-20mA output suitable for direct input to a vibration monitoring PLC. The 4-20mA output is proportional to true RMS velocity in mm/s. A buffered AC output is provided via a BNC connector to enable ...
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
