CMC-99-EMAIL
CMC-99 E-mail Notifications Licence Key. CMC-99 will automatically send Email notification messages via Ethernet connection. E-mail notifications can be used as devices state report when an alarm or a specified signal occurs...
E2-02XX
2m Anthracite extension cable for HC2 Probe with flying leads..
GC-62
GEN II radio transmitter for use with pulse outputs from flow, gas, energy or heat meters and any other devices with a pulse output. The transmitter will accept up to 2 pulse inputs, max 250Hz and 65,000 pulses per logging period, counter resets for each transmission. Operating Range -30 to..
MTN/MS013
¼" - 28 UNF male to stainless steel flat base adapter for attachment with epoxy resin. Provides a rigid connection that maximises the response at high frequencies...
NPL-CAL-11 POINTS
Initial Calibration of pressure sensors purchased from Omni Instruments. Pressure Calibration to 11 points. All ranges between -0.8 and 1,000 Bar. Certificate shows actual output readings in graph and table form. Maximum errors shown at each point as a percentage. Certificate is timed, dated and has a unique reference for..
CAL-SCS-THERMOAIR-ADD
SCS Calibration Certificate for ThermoAir anemometers and Thermoelectric anemometers fitted to ThermoAir display units. Price covers additional probes over a single flow range or additionals ranges on the same probe...
CMC-141-EMAIL
CMC-141 E-mail Notifications Licence Key. CMC-141 will automatically send Email notification messages via Ethernet connection. E-mail notifications can be used as devices state report when an alarm or a specified signal occurs...
E2-05XX
5m Anthracite extension cable for HC2 Probe with flying leads..
MTN/MS067
¼" - 28 UNF male to M8 male stainless steel stud adapter. Provides a rigid connection that maximises the response at high frequencies...
CMC-N16-EMAIL
CMC-N16 E-mail Notifications Licence Key. CMC-N16 will automatically send Email notification messages via Ethernet connection. E-mail notifications can be used as devices state report when an alarm or a specified signal occurs...
MTN/MS124
¼" - 28 UNF male to M10 male stainless steel stud adapter. Provides a rigid connection that maximises the response at high frequencies...
133-222
General Purpose K-Type Penetration Probe, 100mm x 3.3mm diameter. Supplied with 5 metre PTFE Insulated Lead and a K Therm MiniPlug connector. Probe Temperature Range: -75 to +250°C, Response Time: <5 Seconds. Part Ref 133-222..
NPL-RECAL-5 POINTS
UKAS traceable calibration of customers own pressure sensors. Pressure Calibration to 5 points. All ranges between -0.8 and 1,000 Bar. Certificate shows actual output readings in graph and table form. Maximum errors shown at each point as a percentage. Certificate is timed, dated and has a unique reference for complete..
NPL-RECAL-11 POINTS
UKAS traceable calibration of customers own pressure sensors. Pressure Calibration to 11 points. All ranges between -0.8 and 1,000 Bar. Certificate shows actual output readings in graph and table form. Maximum errors shown at each point as a percentage. Certificate is timed, dated and has a unique reference for complete..
97RA
6 digit LED display, AC frequency input for flow rate, suitable for displaying flow rate from turbine meters with AC output. Frequncy range 1-10,000 Hz, accuracy 0.05% of reading, power supply 8-13v DC, operating temperature 0-50 deg C, dimensions 96 x 48 x 104mm deep...
CAL3AXISROTATE
Calibration 3 Axis - Rotate (Wind Tunnel). The calibration procedure involves a fixed wind velocity and the unit is rotated from 0 to 360 Degrees in 180 separate steps, providing a reading every 2 Degrees. The calibration certificate then compares the fixed wind velocity of the wind tunnel to the..
E3-02A
2m White extension cable for HC2 Probe with connector...
GS-61
Transmitters for use with external probes - Wired sockets for 8 x state indications (e.g. door open/close)..
LEO2-CALIBRATION-UKAS
Calibration of Leo 1 & Leo 2 manometers calibrated in accordance with ISO/IEC 17025:2005 by UKAS accredited calibration laboratories..
E3-05A
5m White extension cable for HC2 Probe with connector...
SWCD-0040-INT
Tinytag Explorer Software CD with English, French, German, Italian, Spanish and Swedish quick start guide. This software will guide you through setting up your Tinytag data loggers and can provide a printout of your settings for verification. It will also help you explore the more advanced features available. The Tinytag..
E3-02XX
2m White extension cable for HC2 Probe with flying leads..
GS-62
Transmitters for use with external probes - Wired sockets for 2 x pulse inputs (voltage-free or digital)..
LEO-REC-CALIBRATION-UKAS
Calibration of Leo Record Manometers calibrated in accordance with ISO/IEC 17025:2017 by UKAS accredited calibration laboratories..
