CMC-99-LOGGER
Licence Key to allow a CMC-99 unit to log data. 1.5GB of internal memory, up to 250 million samples, and a maximum logging speed of 10Hz (limited to a number of recording channels)...
GC-60
Transmitters for use with external probes - Wired sockets for 2 x state indications (e.g. door open/close)..
KTC-EXT-CAB-100M-REEL
Type K extension cable 7/0.2mm PVC flat pair. c100M length Reel..
MTN/MS001
Quick-fit to stainless steel flat base adapter for attachment with epoxy resin. Provides a high rigidity connection but with reduced high frequency response...
UA-USB-232-ISO
USB to RS232 adapter, optically isolated, Panel or DIN Rail mountable. Supplied with 3 foot USB cable...
ULTRA-COP
Non-melting hydrocarbon grease. Low contact resistance. 50ml tube. Provides a clear contact from sensor to the surface to improve the ultrasonic signal...
WCDCOM32
COM 32 Installation CD with USB cable..
551-72
30ml Fill Solution for Galvanic Dissolved Oxygen Electrode...
CAL-SCS-ANEMOMETER-ADD
SCS Calibration Certificate for MiniAir anemometers, vane anemometers fitted to MiniAir display units and cup anemometers. Price covers additional probes over a single flow range or additionals ranges on the same probe...
CMC-141-LOGGER
Licence Key to allow a CMC-141 unit to log data. 1.5GB of internal memory, up to 250 million samples, and a maximum logging speed of 10Hz (limited to a number of recording channels)...
GC-60F
GEN II radio transmitter with wired sockets for connection to water detection cables. The GC-60F will transmit a 1.0 value for OK and a 0.0 value to indicate the presence of water on the active portion of the detection cable. Supplied with 4 x AA Alkaline batteries, stub antenna and..
MPU18V
100-240VAC 50/60Hz Mains Adapter supplied with 4-single fit mains plugs for UK, Euro, US and AUS/NZ. Powers SQHUB and Data Loggers. Output 18VDC, 1.6A..
MTN/MS002
Quick-fit to M8 male stainless steel stud adapter. Provides a high rigidity connection but with reduced high frequency response...
UA-USB-485-ISO
USB to RS485 adapter, optically isolated, Panel or DIN Rail mountable. Supplied with 3 foot USB cable...
CMC-N16-LOGGER
Licence Key to allow a CMC-N16 unit to log data...
MTN/MS003
Quick-fit to M10 male stainless steel stud adapter. Provides a high rigidity connection but with reduced high frequency response...
133-220
General Purpose K-Type Penetration Probe, 100mm x 3.3mm diameter. Supplied with 3 metre PTFE Insulated Lead and a K Therm MiniPlug connector. Probe Temperature Range: -75 to +250°C, Response Time: <5 Seconds. Part Ref 133-220..
3462523
2 Metre Cable with IP67 M12 Mating Connector. Colour Coding: Pin 1 - Brown, Pin 2 - White, Pin 3 - Blue, Pin 4 - Black...
551-73
500ml Zero Solution for Dissolved Oxygen Electrode..
888257
Quasar 900 Series Extended Commissioning Kit, Covers Methane, Propane and Ethylene. The kit includes an alignment tool, a magnetic mode selector, 6 functional check filters (Part No. 888260-1, 88260-2, 888260-3, 888260-4, 888260-5 and 888260-6), socket keys and non-EX USB/RS485 harness converter kit.. Used for System installations and periodical function tests..
CAL-SCS-THERMOAIR
SCS Calibration Certificate for ThermoAir anemometers and Thermoelectric anemometers fitted to ThermoAir display units. Price covers a 5 point calibration..
CAL2AXISROTATE
Calibration 2 Axis - Rotate (Wind Tunnel). The calibration procedure involves a fixed wind velocity and the unit is rotated from 0 to 360 Degrees in 180 separate steps, providing a reading every 2 Degrees. The calibration certificate then compares the fixed wind velocity of the wind tunnel to the..
CALCERT B
Recalibration Certificate for Infrared Sensors, PyroMini, PyroCouple and PyroPen. UKAS traceable certificate showing the measured temperature at three points across the sensors temperature range...
CALPROB
2 Point calibration of oven temperature probe...
