PELI1120ORANGE
Portable carry case, I.P 67 without foam insert. Internal dimensions 188L x 125W x 76H (mm). Orange Case..
190LT- CALIBRATION
Calibration of a 190 ultrasonic flow meter. Flow rates checked at three levels and compared to calibrated flow meters...
9400A
9400 Power Rail distributes power to mounted 3100 Slim Series isolators. The Power Rail is supplied with cover and 2 end covers (1 right-hand and 1 left-hand). Dimensions: 35 x 15mm (W x D). Supplied in 1m (±2mm) lengths and can be cut to size and fitted with additional end..
ACS-9700
2-pin plug. Suitable for use with TGPR-0804, TGPR-1001 and TGPR-1201 communication interface and on various loggers for the temperature sensor inputs...
GL-70
GEN II radio transmitter with integrated Littlemore Scientific light (Visible and UV), temperature and relative humidity sensors. Temperature Range -30 to +65°C, Resolution 0.1°C and Accuracy ±0.4°C (5 to 40°C). Humidity Range 0-100%, Resolution 0.1% and Accuracy ±2% (10 to 90%). Visible Light Range 0-4,000 Lux @ 0.1 Lux resolution..
HMI5043N
HMI5043N graphic HMI 4.3 inch TFT colour touchscreen display. 2 serial ports, RS232 and RS485, power supply 24vDC@250mA, IP65 front panel. Fully programmable with graphic indicators, dials, bar graphs and process symbols, pop up alarms etc. 480 x 272 pixel resolution. 128MB flash memory, 64MB DRAM. Can act as MODBUS..
HYGR201
HygroAir 20 Temperature and Humidity probe with lemo connector for direct connection to the MC20 display. Humidity range 0 to 99.9%RH, accuracy ±1.8% at 10-90%RH. Temperature range -20 to 70°C, accuracy ±0.3°C at 0-40°C...
MPM-393 Connectors
Mating plug mPm-393 with 2m cable...
MULTIDIP
2.4GHZ WiFi antenna centre fed dipole 5m cable SMA..
SCREEN-MODEL-306
Stevenson screen to protect the air temperature probe from the affects of rain and wind on the temperature reading. The white UV stabilized thermoplastic discs offer a high reflectivity, low thermal conductivity and rugged weather resistance. Stainless Steel mounting bracket suitable for pipes up to 27mm, or direct connection to..
UA-KIT-USB-232
SenixView RS-232 Configuration Kit with USB adaptor for sensor setup or real-time monitoring. Kit comes complete with Serial RS-232 to USB converter, serial data cable, Interface board, Universal power supply and software CD (with SenixVIEW software, videos and drivers). Kit is also compatible with Universal Terminal Board and Universal Terminal..
ACS-9701
3 Pin Plug. Suitable for use with all Tinytag Ultra, Plus and View data loggers. For use with the communication interface...
HYGR202
HygroAir 20 Temperature and Humidity probe with 1.8m cable and lemo connector for direct connection to the MC20 display. Humidity range 0 to 99.9%RH, accuracy ±1.8% at 10-90%RH. Temperature range -20 to 70°C, accuracy ±0.3°C at 0-40°C...
UA-KIT-USB-485
SenixView RS-485 Configuration Kit with USB adaptor for sensor setup or real-time monitoring. Kit comes complete with Serial RS-485 to USB converter, Interface board, Universal power supply and software CD (with SenixVIEW software, videos and drivers). Kit is also compatible with Universal Terminal Board and Universal Terminal Board with Relays...
WIFIBM
2.4GHz Wi-Fi body mounted antenna. Dome shaped, robust waterproof housing...
CAB-3239
Tinytag CAB-3249 Voltage/Current Input Lead for connection of voltage and current input signals to Tinytag data loggers. Includes a 5-pin connection to logger and 1m flying tails...
CAB-3246
Tinytag CAB-3246 Count Input Lead for connection of 2-wire input signals to Tinytag data loggers. Includes a 2-pin connection to logger and 1m flying tails...
133-158
General Purpose K-Type Penetration Probe, 100mm x 3.3mm diameter. Supplied with 1 metre PTFE Insulated Lead and a K Therm MiniPlug connector. Probe Temperature Range: -75 to +250°C, Response Time: <5 Seconds. Part Ref 133-158..
5331A3B-ENCL
5331A3B programmable transmitter with a 7.2-35vDC power supply. Single channel unit for PT100, thermocouple, Resistance or bi-polar mV input, producing a 2-wire 4-20mA output. 1.5kvAC galvanic isolation. Programmed to suit the connected sensor. Transmitter fitted in weatherproof enclosure with 2 cable glands...
551-71
30ml Fill Solution for Polargraphic dissolved Oxygen probe...
825-990
This manometer hose set will fit the 9215, 9230 & 9275 series handheld pressure meters. Supplied as 2 x 300 mm lengths x 4mm ID it allows accurate gas pressure testing of heating appliances, flue draught measurement etc...
825-998
This manometer hose set will fit the 9205 series handheld pressure meters. Supplied as 2 x 500 mm lengths x 6mm ID it allows accurate gas pressure testing of heating appliances, flue draught measurement etc...
890-111
UKAS 3 point Calibration certificate. Only available if purchased at the same time as the meter...
BATT-SB-1/2AA
SAFT LS14250 Size ½AA Battery. Capacity 3.6V @ 1.2Ah...
