HRN-33
AC voltage monitoring relay, adjustable set point 167-276 VAC for high or low voltage, adjustable time delay up to 10 seconds. Single pole changeover contact. DIN rail mount. Discontinued Product..
HS-100S
HS-100S Series, side exit, 100mV/g output, 2 Pin MS Connector, 1/4 inch -28 UNF Male mounting..
HS-420 Series Accelerometer
HS-420 Series Vibration Sensor. Output 4-20mA for RMS Velocity (mm/s). Velocity ranges between 0-10mm/s and 0-100mm/sec. Unit comes fitted with connectors of 5m cable as standard (up to 100m available on request) and various mounting options...
HS-420T Series – Dual Accelerometers & Temperature Outputs
A range of dual output accelerometers with a separate temperature output. suitable for vibration monitoring. The HS-420 series measure vibration as a velocity in mm/s with a 4-20mA output. HS-422 series measure the vibration as an acceleration in units of g with a 4-20mA output. Both units has a separate..
HS-AC010-10
10m Screened PUR cable with M12, 4-Pole, Straight female connector. Suitable for HS-420 series accelerometers..
HS-AC010-15
15m Screened PUR cable with M12, 4-Pole, Straight female connector. Suitable for HS-420 series accelerometers..
HS-AC010-20
20m Screened PUR cable with M12, 4-Pole, Straight female connector. Suitable for HS-420 series accelerometers..
HS-AC010-5
5m Screened PUR cable with M12, 4-Pole, Straight female connector. Suitable for HS-420 series accelerometers..
HS-AC011-10
10m Screened PUR cable with M12, 4-Pole, Right-angled female connector. Suitable for HS-420 series accelerometers..
HS-AC011-15
15m Screened PUR cable with M12, 4-Pole, Right-angled female connector. Suitable for HS-420 series accelerometers..
HS-AC011-20
20m Screened PUR cable with M12, 4-Pole, Right-angled female connector. Suitable for HS-420 series accelerometers..
HS-AC011-5
5m Screened PUR cable with M12, 4-Pole, Right-angled female connector. Suitable for HS-420 series accelerometers..
HW5-AW-CODE
HW5 Professional with AwQuick function (Water Activity). Website download and use the key code supplied with purchase...
HW5-Code
HC2 device configuration, recorded data download and analysis. Full alarm functions.Networking, grouping of devices, graph overlays, printing of protocols. There is no 'Log to PC' function - RMS provides this and more!Website download. Website download and use the key code supplied with purchase...
HygroClip 2 IC
Industrial Hygroclip 2 cable mounted probe...
HYGROPALM AW1
Portable water activity instrument, with AW Quick software..
I.S. HS-420 Series
HS-420 Series Intrinsically Safe Vibration Sensor, tailored for mining or petrochemical environments. Output 4-20mA for RMS Velocity (mm/s). Velocity ranges between 0-10mm/s and 0-100mm/sec. Each unit comes fitted with an M12 connector or 5m of cable (overbraided ETFE, silicon or flame resistant) as standard (up to 100m available on request)..
I.S. HS-422 Series
HS-421 Series Intrinsically Safe Vibration Sensor, tailored for mining or petrochemical environments. Output 4-20mA for RMS Acceleration (g). Acceleration ranges between 0-1g RMS and 0-100g RMS. Each unit comes fitted with an M12 connector or 5m of cable (overbraided ETFE, silicon or flame resistant) as standard (up to 100m available..
IC-209
Connects Pocket Logger, or M31 Multiplexer, to 9-pin Com port of a PC. Allows for configuration of and downloading data from XR440 via Pocket Logger Software. Cable length 5 feet...
ICA 1
Miniature PCB, 13-30VDC power supply, 0.1Vdc-10VDC Output. Use only with fully differential inputs...
ICA 2
Miniature PCB, 8.5-14VDC Power supply, 0.1Vdc-5VDC Output. Use only with fully differential inputs...
ICA 3
Miniature PCB, Power supply 13 to 15VDC, with 0-10Vdc Output...
ICA 5
Miniature PCB, Power Supply 7.5-28VDC, 4-20mA Output (2 wire)...
ICE-12FT
Extends IC209, IC211, or ICM cables by 12 ft (3.6 m)..
