40/40I Triple IR (IR3) SharpEye Flame Detector. Detector suitable for far detection with a sensitivity range of 65m for a 0.1m gasoline fire and Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable ...
40/40M Multi IR (IR4) SharpEye Flame Detector. Detector suitable for near detection with a sensitivity range of 30m for a 0.1m gasoline fire and Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable ...
40/40M Multi IR (IR4) SharpEye Flame Detector. Detector suitable for far detection with a sensitivity range of 65m for a 0.1m gasoline fire and Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable ...
40/40LB UV/IR SharpEye Flame Detector. Detector suitable for very near detection with a sensitivity range of 15m for a 0.1m gasoline fire and Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable gland ...
40/40L UV/IR SharpEye Flame Detector. Detector suitable for very near detection with a sensitivity range of 15m for a 0.1m gasoline fire and without Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable ...
Swivel mount for 40/40 series Flame Detectors. The bracket allows for up to 40 movement in any direction. This ensures the maximum effectiveness and accuracy of the location for the detectors optimum coverge area. ...
Mini PC pre-loaded with software that enables the user to re-configure settings or perform diagnostics on all 40/40 series Flame Detectors. Kit includes cable harness with RS485 to USB converter. ...
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 703. Max line of sight distance 50 to 140m. Power Supply 18-32vDC. Electrical connection 2 x M25, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a tilt mount. ...
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 701. Max line of sight distance 4 to 20m. Power Supply 18-32vDC. Electrical connection 2 x 3/4 inch NPT, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a ...
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 703. Max line of sight distance 50 to 140m. Power Supply 18-32vDC. Electrical connection 2 x 3/4 inch NPT, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a ...
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 702. Max line of sight distance 15 to 70m. Power Supply 18-32vDC. Electrical connection 2 x M25, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a tilt mount. ...
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 702. Max line of sight distance 15 to 70m. Power Supply 18-32vDC. Electrical connection 2 x 3/4 inch NPT, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a ...
Waterproof 8-pin plug connector with 10m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3 ...
PR1 Smart Pyranometer for the RaZON+ Solar Monitoring System. Pyranometer is supplied with no plug or cable but will connect to RaZON+ using the existing cable. PR1 sensors can be exchanged without the need for any adjustments. This allows the PR1 from a RaZON+ to be swapped to allow for ...
GEN II radio transmitter for a single external K-Type/T-Type thermocouple probes with display. Range -200 to +200°C, Resolution 0.1°C and Accuracy ±0.3°C. Supplied with 4 x AA Alkaline batteries, stub antenna and integrated LCD display. ...
Waterproof 8-pin plug connector with 25m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3 ...
GEN II radio transmitter for a single external K/T Type Thermocouple probe with visual and audible alarm (High and Low alarm level configured using DARCA software). Temperature Range -200 to +200°C, Resolution 0.1°C and Accuracy ±0.3°C. Supplied with 4 x AA Alkaline batteries, stub antenna and integrated LCD display. ...
Waterproof 8-pin plug connector with 50m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3 ...
40/40I Triple IR (IR3) SharpEye Flame Detector. Detector suitable for far detection with a sensitivity range of 65m for a 0.1m gasoline fire and Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable gland available separately). Unit is ATEX certified. ...
B103879
40/40M Multi IR (IR4) SharpEye Flame Detector. Detector suitable for near detection with a sensitivity range of 30m for a 0.1m gasoline fire and Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable gland available separately). Unit is ATEX certified. ...
B103880
40/40M Multi IR (IR4) SharpEye Flame Detector. Detector suitable for far detection with a sensitivity range of 65m for a 0.1m gasoline fire and Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable gland available separately). Unit is ATEX certified. ...
B103883
40/40LB UV/IR SharpEye Flame Detector. Detector suitable for very near detection with a sensitivity range of 15m for a 0.1m gasoline fire and Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable gland available separately). Unit is ATEX certified. ...
B103884
40/40L UV/IR SharpEye Flame Detector. Detector suitable for very near detection with a sensitivity range of 15m for a 0.1m gasoline fire and without Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable gland available separately). Unit is ATEX certified. ...
B103888
Swivel mount for 40/40 series Flame Detectors. The bracket allows for up to 40 movement in any direction. This ensures the maximum effectiveness and accuracy of the location for the detectors optimum coverge area. ...
B103908
Weather Protector for 40/40 Flame Detectors. Will protect the detector from rain, snow and direct sunlight. ...
B104013
Mini PC pre-loaded with software that enables the user to re-configure settings or perform diagnostics on all 40/40 series Flame Detectors. Kit includes cable harness with RS485 to USB converter. ...
B104068
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 703. Max line of sight distance 50 to 140m. Power Supply 18-32vDC. Electrical connection 2 x M25, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a tilt mount. ATEX & SIL2 certification. ...
B104211
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 701. Max line of sight distance 4 to 20m. Power Supply 18-32vDC. Electrical connection 2 x 3/4 inch NPT, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a tilt mount. ATEX & SIL2 certification. ...
B104212
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 703. Max line of sight distance 50 to 140m. Power Supply 18-32vDC. Electrical connection 2 x 3/4 inch NPT, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a tilt mount. ATEX & SIL2 certification. ...
B104231
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 702. Max line of sight distance 15 to 70m. Power Supply 18-32vDC. Electrical connection 2 x M25, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a tilt mount. ATEX & SIL2 certification. ...
B104238
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 702. Max line of sight distance 15 to 70m. Power Supply 18-32vDC. Electrical connection 2 x 3/4 inch NPT, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a tilt mount. ATEX & SIL2 certification. ...
0362621
Waterproof 8-pin plug connector with 10m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3 ...
0367712
Small Top Mounting Plate for a single global radiation instruments, with or without ventilation units. ...
0382450
PR1 Smart Pyranometer for the RaZON+ Solar Monitoring System. Pyranometer is supplied with no plug or cable but will connect to RaZON+ using the existing cable. PR1 sensors can be exchanged without the need for any adjustments. This allows the PR1 from a RaZON+ to be swapped to allow for calibration without any data being missed. ...
GD-21
GEN II radio transmitter for a single external K-Type/T-Type thermocouple probes with display. Range -200 to +200°C, Resolution 0.1°C and Accuracy ±0.3°C. Supplied with 4 x AA Alkaline batteries, stub antenna and integrated LCD display. ...
OCEANDISP-4K-CABLE
OceanDISP-4K Subsea Display unit. 5m cable assembly with inline connectors - fitted with subcon MCIL5F miniature 5 pin female connector to 5501-1508 Burton connector. Suitable for 1K, 2K,3K and 4K units. ...
SPC4
IP67 Splash proof cover ...
BAR GRAPHS
The BAR-X and BAR-A are user friendly programmable process bargraph displays. The BAR-A is for display only, the BAR-X includes 2 alarm relays. ...
BAT5AH
Spare 5AH battery ...
0362623
Waterproof 8-pin plug connector with 25m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3 ...
GD-21AL
GEN II radio transmitter for a single external K/T Type Thermocouple probe with visual and audible alarm (High and Low alarm level configured using DARCA software). Temperature Range -200 to +200°C, Resolution 0.1°C and Accuracy ±0.3°C. Supplied with 4 x AA Alkaline batteries, stub antenna and integrated LCD display. ...
0362624
Waterproof 8-pin plug connector with 50m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3 ...
B103876
40/40I Triple IR (IR3) SharpEye Flame Detector. Detector suitable for far detection with a sensitivity range of 65m for a 0.1m gasoline fire and Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable ...
40/40M Multi IR (IR4) SharpEye Flame Detector. Detector suitable for near detection with a sensitivity range of 30m for a 0.1m gasoline fire and Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable ...
40/40M Multi IR (IR4) SharpEye Flame Detector. Detector suitable for far detection with a sensitivity range of 65m for a 0.1m gasoline fire and Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable ...
40/40LB UV/IR SharpEye Flame Detector. Detector suitable for very near detection with a sensitivity range of 15m for a 0.1m gasoline fire and Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable gland ...
40/40L UV/IR SharpEye Flame Detector. Detector suitable for very near detection with a sensitivity range of 15m for a 0.1m gasoline fire and without Built In Test. The unit is fitted with a tilt mount and one swivel mount, ATEX sealing plug and M25 x 1.5 mm cable entries (cable ...
Swivel mount for 40/40 series Flame Detectors. The bracket allows for up to 40 movement in any direction. This ensures the maximum effectiveness and accuracy of the location for the detectors optimum coverge area. ...
Mini PC pre-loaded with software that enables the user to re-configure settings or perform diagnostics on all 40/40 series Flame Detectors. Kit includes cable harness with RS485 to USB converter. ...
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 703. Max line of sight distance 50 to 140m. Power Supply 18-32vDC. Electrical connection 2 x M25, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a tilt mount. ...
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 701. Max line of sight distance 4 to 20m. Power Supply 18-32vDC. Electrical connection 2 x 3/4 inch NPT, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a ...
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 703. Max line of sight distance 50 to 140m. Power Supply 18-32vDC. Electrical connection 2 x 3/4 inch NPT, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a ...
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 702. Max line of sight distance 15 to 70m. Power Supply 18-32vDC. Electrical connection 2 x M25, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a tilt mount. ...
Safeye Xenon 700 Open Path Gas Detection System for Hydrocarbon detection, Type 702. Max line of sight distance 15 to 70m. Power Supply 18-32vDC. Electrical connection 2 x 3/4 inch NPT, 4-20mA output, Relay & RS485 Modbus Interface. System is supplied with one source and one detector, each with a ...
Waterproof 8-pin plug connector with 10m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3 ...
PR1 Smart Pyranometer for the RaZON+ Solar Monitoring System. Pyranometer is supplied with no plug or cable but will connect to RaZON+ using the existing cable. PR1 sensors can be exchanged without the need for any adjustments. This allows the PR1 from a RaZON+ to be swapped to allow for ...
GEN II radio transmitter for a single external K-Type/T-Type thermocouple probes with display. Range -200 to +200°C, Resolution 0.1°C and Accuracy ±0.3°C. Supplied with 4 x AA Alkaline batteries, stub antenna and integrated LCD display. ...
Waterproof 8-pin plug connector with 25m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3 ...
GEN II radio transmitter for a single external K/T Type Thermocouple probe with visual and audible alarm (High and Low alarm level configured using DARCA software). Temperature Range -200 to +200°C, Resolution 0.1°C and Accuracy ±0.3°C. Supplied with 4 x AA Alkaline batteries, stub antenna and integrated LCD display. ...
Waterproof 8-pin plug connector with 50m of pre-wired high quality yellow signal cable with 8 wires and a shield covered with black sleeve. Suitable for: For SMP, SGR and SUV5 Smart Radiometers, plus CMP21 (PT100), CMP22 (PT100), CGR3 (PT100), CGR4 (PT100), CHP1, CNR4, UVS, CSD3 ...
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
