0362605
Waterproof 2-pin plug connector with 100m of pre-wired high quality yellow signal cable with 2 wires and a shield covered with black sleeve for CMP Series Pyranometer and CUV5 Radiometers..
A – Magnetic Mounting Base
A - Magnetic Mounting Base..
A220 Series High-Precision Linear Servo Accelerometers
The A220 series of Servo Accelerometers measure vector acceleration with high accuracy using a closed loop force balance torque mechanism. Available ranges between 1g and 20g, all with a ±5vDC output. This type of accelerometer is suitable for a wide range of applications where precision acceleration measurement is required...
A223-0001-10G
Accelerometer, servo type, range +/-10 G , standard type with connector, output +/-5VDC, power supply +/-15vDC, non linearity less than 0.05% FRO, operating temperature -55 to + 95 deg C,...
A223-0001-1G
Accelerometer, servo type, range +/-1 G , standard type with connector, output +/-5VDC, power supply +/-15vDC, non linearity less than 0.05% FRO, operating temperature -55 to + 95 deg C,...
A223-0001-20G
Accelerometer, servo type, range +/-20 G , standard type with connector, output +/-5VDC, power supply +/-15vDC, non linearity less than 0.05% FRO, operating temperature -55 to + 95 deg C,...
A223-0001-2G
Accelerometer, servo type, range +/-2 G , standard type with connector, output +/-5VDC, power supply +/-15vDC, non linearity less than 0.05% FRO, operating temperature -55 to + 95 deg C,...
A223-0001-5G
Accelerometer, servo type, range +/-5 G , standard type with connector, output +/-5VDC, power supply +/-15vDC, non linearity less than 0.05% FRO, operating temperature -55 to + 95 deg C,...
AC Voltage Monitoring Relay HRN 33
The HRN 33 is an AC mains voltage monitoring relay with adjustable voltage set point from 167-276 VAC and adjustable trip delay of up to 10 seconds. It is ideal for monitoring mains power dropout. The output contact can be connected to a data logger or controller to indicate mains..
AC-NT128MB
128MB Flash Card. Industrial Type. Operating temperature range -40 to +85°C..
AC-NT512MB
512MB Flash Card. Industrial Type. Operating temperature range -40 to +85°C..
AC3001
Active cable for connecting HC2 sensors to USB connector for direct PC interface. HygroClip sensor will be powered by the USB Interface. Cable length 2.8m...
AC3009
Interface cable for connecting HygroFlex, HygroPalm and HygroLog instruments to a USB port on a PC. Instrument will be powered by the AC3009. Requires HW4 software installed on the PC...
2523145
Waterproof 4-pin plug connector for the following Kipp & Zonen equipment. CMP Series pyranometers, CGR3 & CGR4 pyrgeometers and CVF4 & CNF4 ventilation units. Requires customers own cable wiring...
GS-TH
GS-TH Temperature and Humidity Sensor. Temperature Range: -20 to + 85°C, Humidity Range: 0 to 100%RH. The temperature sensor measures the change in capacitance of the conductivity caused by moisture absorption. Usage in an environment with a large quantity of dust, fumes and other organic compound floating about will cause..
OceanDISP-2K
OceanDISP-2K subsea LED display unit suitable for displaying sensor readings from Datataker DT80 and DT85 data loggers. Light activated scrolling display with programmable scroll interval. Suitable for depths up to 2,000m..
PB-5019-1M5
Flat Cable Thermistor Probe for use with Tinytag data loggers. 10K NTC Thermistor, Range -40 to 125°C. The stainless steel probe is 50mm long and 6mm in diameter with a 1.5m cable. IP66 rating with Hyflon MFA cable and 316 stainless steel sheath. Nickel Plated Brass/Zinc Alloy connector...
ACS-9750
K Type Thermocouple Plug. Suitable for use with TGI-3250...
PB-5019-3M
Flat Cable Thermistor Probe for use with Tinytag data loggers. 10K NTC Thermistor, Range -40 to 125°C. The stainless steel probe is 50mm long and 6mm in diameter with a 3m cable. IP66 rating with Hyflon MFA cable and 316 stainless steel sheath. Nickel Plated Brass/Zinc Alloy connector...
AKF398
3 Axis MEMS Accelerometer with a 4-20mA current output. 4-20mA outputs for X, Y and Z axis. Ranges from ±2g to ±40g. M12 5-pin connector. Power Supply 9-36vDC. Dimensions: 34.4 x 34.4 x 38mm. Operating Temperature: -40 to +85°C...
AMS-DIG8
8 Channel extension for the AMS LAN all-in-one Data Aquisition Units. Provides an additional 8 digital channels through 8 galvanically isolated optocoupler inputs and relay outputs. The AMS-DIG8 is installed on to a new AMS42 via an additional backplane and is only available when purchased with a new AMS42 System...
AMS-HANDLE
Practical carrying handle for AMS all-in-one Data Aquisition Units...
AMS-HANDLE2
Two metal carry handles for AMS all-in-one Data Aquisition Units. Suitable for the following amplifier measurement systems: AMS42/AMS84, AMS42-LAN16F/AMS84-LAN16F, and AMS42-USB/AMS84-USB...
