omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Edit Content
Need Help?

Charge Controllers

Edit Content

HRS Charge Controller

The HRS Regulator incorporates electronic Pulse Width Modulation (PWM) technology to regulate battery voltage to prevent overcharge. This generation of voltage regulation includes speed limiting to the turbine when the battery is full, which increases the lifetime of the windcharger. The HRS503 is designed for use with the Rutland 504 ...
View Product

HRDi Charge Controller

The HRSi conveniently brings together a Rutland Windcharger charge regulator with an input for up to 160 Watts of photovoltaic panels in a single easy to install device. Multi-stage charge control delivers appropriate charge levels required to ensure your batteries get the maximum power they are able to retain and ...
View Product
HRDi Charge Regulator

HRDi Charge Controller

The HRDi Charge Controller is the latest wind and solar charge regulator featuring a new digital display and 160W solar panel input in a dual charging system. The HRDi has evolved from and improved on the successful HRDX controller. It provides Charge Control and Power Splitting for off-grid system with ...
View Product

Solsum Solar Regulators

Solsum Regulators provide protection for batteries from deep discharge and prevents reverse current in darkness. The Steca Solsum F-Line continues the huge success of one of the most used SHS controllers. Units have a power range of 6, 8 or 10A and will automatically recognise 12V or 24V. The circuit ...
View Product
DL-300 Leading Edge Wind Turbine Controller

DL300 Wind Turbine Controller (12/24V)

The DL-300 charge controller is designed to be used with the LE-v150, LE-300 and LE-300 wind turbines. It incorporates a 300 Watt resistor/heater and controller board in a stout powder coated steel enclosure. The DL-300 controller operates like an electrical overflow for your batteries and additional power is dissipated as ...
View Product
Edit Content

HRS Charge Controller

The HRS Regulator incorporates electronic Pulse Width Modulation (PWM) technology to regulate battery voltage to prevent overcharge. This generation of voltage regulation includes speed limiting to the turbine when the battery is full, which increases the lifetime of the windcharger. The HRS503 is designed for use with the Rutland 504 and previous Rutland 503 models. ...
Add to basket

HRDi Charge Controller

The HRSi conveniently brings together a Rutland Windcharger charge regulator with an input for up to 160 Watts of photovoltaic panels in a single easy to install device. Multi-stage charge control delivers appropriate charge levels required to ensure your batteries get the maximum power they are able to retain and remain float charged. Suitable for charge regulation of the Rutland 913 & FM910-3 Furlmatic model windchargers ...
Add to basket
HRDi Charge Regulator

HRDi Charge Controller

The HRDi Charge Controller is the latest wind and solar charge regulator featuring a new digital display and 160W solar panel input in a dual charging system. The HRDi has evolved from and improved on the successful HRDX controller. It provides Charge Control and Power Splitting for off-grid system with two independent batteries. The contemporary design meets the needs of increasing power demands and features a useful digital display that shows the amount of generated ...
Add to basket

Solsum Solar Regulators

Solsum Regulators provide protection for batteries from deep discharge and prevents reverse current in darkness. The Steca Solsum F-Line continues the huge success of one of the most used SHS controllers. Units have a power range of 6, 8 or 10A and will automatically recognise 12V or 24V. The circuit board comes with electronic protection and an LED user interface allows for easy checking of the battery state of charge at any time. The large ...
Read more
DL-300 Leading Edge Wind Turbine Controller

DL300 Wind Turbine Controller (12/24V)

The DL-300 charge controller is designed to be used with the LE-v150, LE-300 and LE-300 wind turbines. It incorporates a 300 Watt resistor/heater and controller board in a stout powder coated steel enclosure. The DL-300 controller operates like an electrical overflow for your batteries and additional power is dissipated as heat. This means that the turbine is always running ' and not being switched on and off as is the case with other charge control ...
Add to basket

HRS Charge Controller

The HRS Regulator incorporates electronic Pulse Width Modulation (PWM) technology to regulate battery voltage to prevent overcharge. This generation of voltage regulation includes speed limiting to the turbine when the battery is full, which increases the lifetime of the windcharger. The HRS503 is designed for use with the Rutland 504 ...
View Product

HRDi Charge Controller

The HRSi conveniently brings together a Rutland Windcharger charge regulator with an input for up to 160 Watts of photovoltaic panels in a single easy to install device. Multi-stage charge control delivers appropriate charge levels required to ensure your batteries get the maximum power they are able to retain and ...
View Product
HRDi Charge Regulator

HRDi Charge Controller

The HRDi Charge Controller is the latest wind and solar charge regulator featuring a new digital display and 160W solar panel input in a dual charging system. The HRDi has evolved from and improved on the successful HRDX controller. It provides Charge Control and Power Splitting for off-grid system with ...
View Product

Solsum Solar Regulators

Solsum Regulators provide protection for batteries from deep discharge and prevents reverse current in darkness. The Steca Solsum F-Line continues the huge success of one of the most used SHS controllers. Units have a power range of 6, 8 or 10A and will automatically recognise 12V or 24V. The circuit ...
View Product
DL-300 Leading Edge Wind Turbine Controller

DL300 Wind Turbine Controller (12/24V)

The DL-300 charge controller is designed to be used with the LE-v150, LE-300 and LE-300 wind turbines. It incorporates a 300 Watt resistor/heater and controller board in a stout powder coated steel enclosure. The DL-300 controller operates like an electrical overflow for your batteries and additional power is dissipated as ...
View Product

Contact us

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.

A real person will answer the phone and deal with your enquiry
Sales & Technical support

We are here to help

Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

Call us on +44 (0)1382 443000

Enquire now