Standard Industrial Pressure Transmitters

Grid View
List View

Edit Content

Keller Piezoresistive Pressure Transmitters Series 21Y

The Keller Series 21Y pressure transducer / transmitter is designed for general industrial and OEM applications requiring medium to high measurement accuracy. Its high design flexibility affords numerous options of process and electrical connection. Pressure ranges between 0-2 and 0-1000 bar are available with output signal options of 4-20mA, 0-10V ...

P.Touch Pressure Sensor

The P.Touch Pressure Sensor incorporates an integrated TFT touch display. This innovative design enables direct pressure readings on the sensor itself and allows for convenient adjustment of switching points using a virtual rotary wheel on the touch screen. The sensors are further enhanced by the inclusion of an IO-Link Communications ...

P.Trace Pressure Sensor

The P.Trace Pressure Sensor stands out as a compact and exceptionally robust solution, utilising a durable ceramic measuring cell. Enclosed in an IP68-rated stainless steel housing, it is designed to withstand harsh industrial environments and deliver reliable performance under continuous operation. ...

PA600 Series Standard Industrial Pressure Transducers and Transmitters

The PA600 series of industrial pressure sensors are suitable for measuring gas and liquid pressures across a wide range of general purpose and industrial applications. The standard the PA600 comes with: Viton O-ring, 303 stainless steel case, ceramic diaphragm (96% Aluminium Oxide Al2O3) and a ¼"BSP male process connection, but ...

PA600B Barometric Pressure Transmitter

The PA600 series barometric pressure transmitter has a set range of 0.75 - 1.25 Bar absolute. It is available with 4-20mA 0-5V, 0-10V, a ratiometric 0.5 - 4.5V or 2mV/V outputs The unit has a stainless steel body and suitable for long-term installation outdoors. ...

Hammer Union Pressure Sensor

These 1502 hammer union pressure sensors are suitable to monitor pipelines up to 1000 Bar. Designed for harsh environments where high burst pressure and high vibrations are present. ...

Keller Series 33X Highly Precise Pressure Transmitters

The Series 33X is a high-precision Piezoresistive pressure transmitter with a highly accurate, mathematically compensated output signal. Standard accuracy is 0.05% of full scale for both RS485 serial and analog outputs, with the options of up to 0.01%FS accuracy. The RS485 comms allow the Control Center Series 30 (CCS30) software, ...

P600FA Field Adjustable Pressure Transmitters

The P600FA is a field adjustable pressure transmitter for high pressure ranges of 0-1000 and 0-5000 Bar. Outputs available are 4-20mA, 0-5V, 0-10V and 10mV/V. The units are constructed from Titanium using Silicon on Sapphire technology with a stainless steel body for long term performance. Optional ATEX approval. ...

P642FAX Field Adjustable Pressure Transmitters

The P642FAX is an ATEX Certified pressure transmitter available with ranges from 0-500 mBar to 0-5000 Bar with the availability of field adjustments to both span and zero by up to ±10%. The units have a stainless steel body and a Titanium media connection that is compatible with a wide ...

PTM Programmable Pressure Transmitter with 4-20mA, RS485 Output

The PTM485 Programmable pressure transmitter, is available in ranges up to 1000 bar G. It has a 316L s/s housing and diaphragm, Viton seals and 1/4 G pressure connection. The RS485 output provides both pressure and temperature measurements in MODBUS protocol. The unit also has a 4 -20mA output for ...

Keller Series 23SX High Precision Piezoresistive Pressure Transmitters

The Series 23SX is a high precision piezoresistive pressure transmitter designed to combine the impressive features of the 23SY and 33X series pressure transmitters. 23SX Pressure Transmitter features a fully welded design of the 23SX with the highly accurate and scalable digital compensated electronics of the Series 33X. Offering a ...

Keller Series 23SY Temperature Compensated Pressure Transmitters

The Keller Series 23SY pressure transmitter has digital temperature compensation which provides accuracy of 0.3% over 0-50C or 0.4% over -10 to +80°C. It is available in pressure ranges from vacuum to 1000 bar gauge or absolute and can be supplied with 4-20mA, 0-5v, 0-10v or 0.5 - 4.5v outputs. ...

Keller RFID Pressure / Transponder Data Logger Series 21 D(C) RFID

The Keller Series 21 D RFID pressure transponder / data logger combines a piezo resistive pressure sensor with RFID technology to allow wireless reading and collection of pressure measurements, and in the DC version, downloading of logged data. The standard RFID unit is self powered. The DC, data logging version ...

Keller EXd Pressure Transmitters for Hazardous Applications, Series 23 ED / 25

These Keller pressure transmitters are approved for use in high explosion risk areas and are ATEX approved certified EXD. They provide stable and accurate measurements of absolute and gauge pressures of liquid and gaseous media in the pressure range between 200mBar and 300 Bar. Available with standard 1/4" BSP male ...

Static Pressure Sensor Heat Sink

This heat sink enables standard pressure sensors to be used on systems where the medium has a higher temperature than the sensor allows. The cooling fins effectively transfers the heat, depending on the ambient temperature. Systems with medium temperatures of up to 260 degrees C can be monitored without harming ...

Keller Series 23 & 25 Piezoresistive Pressure Transmitters

These piezoresistive pressure transmitter are designed for precision measurements in industrial applications for pressures ranging from 200mBar up to 1,000 Bar for liquids and gases. Series 23 has a standard ¼" BSP threaded connection, whilst series 25 has a ¼" BSP flush diaphragm pressure port. Output options include a 2-wire ...

Edit Content

Keller Piezoresistive Pressure Transmitters Series 21Y

The Keller Series 21Y pressure transducer / transmitter is designed for general industrial and OEM applications requiring medium to high measurement accuracy. Its high design flexibility affords numerous options of process and electrical connection. Pressure ranges between 0-2 and 0-1000 bar are available with output signal options of 4-20mA, 0-10V and 0.5-4.5V. The Series 21Y employs active temperature compensation to significantly reduce total error band and has extremely high EMC protection for a transmitter of ...

P.Touch Pressure Sensor

The P.Touch Pressure Sensor incorporates an integrated TFT touch display. This innovative design enables direct pressure readings on the sensor itself and allows for convenient adjustment of switching points using a virtual rotary wheel on the touch screen. The sensors are further enhanced by the inclusion of an IO-Link Communications Point. ...

P.Trace Pressure Sensor

The P.Trace Pressure Sensor stands out as a compact and exceptionally robust solution, utilising a durable ceramic measuring cell. Enclosed in an IP68-rated stainless steel housing, it is designed to withstand harsh industrial environments and deliver reliable performance under continuous operation. ...

PA600 Series Standard Industrial Pressure Transducers and Transmitters

The PA600 series of industrial pressure sensors are suitable for measuring gas and liquid pressures across a wide range of general purpose and industrial applications. The standard the PA600 comes with: Viton O-ring, 303 stainless steel case, ceramic diaphragm (96% Aluminium Oxide Al2O3) and a ¼"BSP male process connection, but various standard options are available. The PA600 series provides a wide choice of electrical outputs from its ASIC-based amplifier circuit, these include 4-20mA, 0-5V, 0-10V, ...

PA600B Barometric Pressure Transmitter

The PA600 series barometric pressure transmitter has a set range of 0.75 - 1.25 Bar absolute. It is available with 4-20mA 0-5V, 0-10V, a ratiometric 0.5 - 4.5V or 2mV/V outputs The unit has a stainless steel body and suitable for long-term installation outdoors. ...

Hammer Union Pressure Sensor

These 1502 hammer union pressure sensors are suitable to monitor pipelines up to 1000 Bar. Designed for harsh environments where high burst pressure and high vibrations are present. ...

Keller Series 33X Highly Precise Pressure Transmitters

The Series 33X is a high-precision Piezoresistive pressure transmitter with a highly accurate, mathematically compensated output signal. Standard accuracy is 0.05% of full scale for both RS485 serial and analog outputs, with the options of up to 0.01%FS accuracy. The RS485 comms allow the Control Center Series 30 (CCS30) software, for easy reconfiguration of analog output ranges and adjustments to zero point and gain settings. With ATEX certification, the Series 33X is ideally suited high ...

P600FA Field Adjustable Pressure Transmitters

The P600FA is a field adjustable pressure transmitter for high pressure ranges of 0-1000 and 0-5000 Bar. Outputs available are 4-20mA, 0-5V, 0-10V and 10mV/V. The units are constructed from Titanium using Silicon on Sapphire technology with a stainless steel body for long term performance. Optional ATEX approval. ...

P642FAX Field Adjustable Pressure Transmitters

The P642FAX is an ATEX Certified pressure transmitter available with ranges from 0-500 mBar to 0-5000 Bar with the availability of field adjustments to both span and zero by up to ±10%. The units have a stainless steel body and a Titanium media connection that is compatible with a wide range applications. ...

PTM Programmable Pressure Transmitter with 4-20mA, RS485 Output

The PTM485 Programmable pressure transmitter, is available in ranges up to 1000 bar G. It has a 316L s/s housing and diaphragm, Viton seals and 1/4 G pressure connection. The RS485 output provides both pressure and temperature measurements in MODBUS protocol. The unit also has a 4 -20mA output for pressure. Accuracy ±0.1%. Temp range 0 to 70°C. Using the optional programming kit the measurement range is adjustable with a 4:1 turn down from the ...

Keller Series 23SX High Precision Piezoresistive Pressure Transmitters

The Series 23SX is a high precision piezoresistive pressure transmitter designed to combine the impressive features of the 23SY and 33X series pressure transmitters. 23SX Pressure Transmitter features a fully welded design of the 23SX with the highly accurate and scalable digital compensated electronics of the Series 33X. Offering a total error band of ±0.25% over the full -10 to +80°C compensated temperature range with 4-20mA or 0-10V outputs with RS485 Communications available. All RS485 ...

Keller Series 23SY Temperature Compensated Pressure Transmitters

The Keller Series 23SY pressure transmitter has digital temperature compensation which provides accuracy of 0.3% over 0-50C or 0.4% over -10 to +80°C. It is available in pressure ranges from vacuum to 1000 bar gauge or absolute and can be supplied with 4-20mA, 0-5v, 0-10v or 0.5 - 4.5v outputs. ...

Keller RFID Pressure / Transponder Data Logger Series 21 D(C) RFID

The Keller Series 21 D RFID pressure transponder / data logger combines a piezo resistive pressure sensor with RFID technology to allow wireless reading and collection of pressure measurements, and in the DC version, downloading of logged data. The standard RFID unit is self powered. The DC, data logging version has a small internal battery which can power the device for up to 5 years assuming a measurement rate of 1 reading per minute. A ...

Keller EXd Pressure Transmitters for Hazardous Applications, Series 23 ED / 25

These Keller pressure transmitters are approved for use in high explosion risk areas and are ATEX approved certified EXD. They provide stable and accurate measurements of absolute and gauge pressures of liquid and gaseous media in the pressure range between 200mBar and 300 Bar. Available with standard 1/4" BSP male and 1/2" BSP flush diaphragm connections. ...

Static Pressure Sensor Heat Sink

This heat sink enables standard pressure sensors to be used on systems where the medium has a higher temperature than the sensor allows. The cooling fins effectively transfers the heat, depending on the ambient temperature. Systems with medium temperatures of up to 260 degrees C can be monitored without harming the sensor. ...

Keller Series 23 & 25 Piezoresistive Pressure Transmitters

These piezoresistive pressure transmitter are designed for precision measurements in industrial applications for pressures ranging from 200mBar up to 1,000 Bar for liquids and gases. Series 23 has a standard ¼" BSP threaded connection, whilst series 25 has a ¼" BSP flush diaphragm pressure port. Output options include a 2-wire 4-20mA, 3- wire 0-20mA or 0-10vDC with a standard frequency response of 1kHz with options available for 5kHz and 10kHz. ...

Keller Piezoresistive Pressure Transmitters Series 21Y

The Keller Series 21Y pressure transducer / transmitter is designed for general industrial and OEM applications requiring medium to high measurement accuracy. Its high design flexibility affords numerous options of process and electrical connection. Pressure ranges between 0-2 and 0-1000 bar are available with output signal options of 4-20mA, 0-10V ...

P.Touch Pressure Sensor

The P.Touch Pressure Sensor incorporates an integrated TFT touch display. This innovative design enables direct pressure readings on the sensor itself and allows for convenient adjustment of switching points using a virtual rotary wheel on the touch screen. The sensors are further enhanced by the inclusion of an IO-Link Communications ...

P.Trace Pressure Sensor

The P.Trace Pressure Sensor stands out as a compact and exceptionally robust solution, utilising a durable ceramic measuring cell. Enclosed in an IP68-rated stainless steel housing, it is designed to withstand harsh industrial environments and deliver reliable performance under continuous operation. ...

PA600 Series Standard Industrial Pressure Transducers and Transmitters

The PA600 series of industrial pressure sensors are suitable for measuring gas and liquid pressures across a wide range of general purpose and industrial applications. The standard the PA600 comes with: Viton O-ring, 303 stainless steel case, ceramic diaphragm (96% Aluminium Oxide Al2O3) and a ¼"BSP male process connection, but ...

PA600B Barometric Pressure Transmitter

The PA600 series barometric pressure transmitter has a set range of 0.75 - 1.25 Bar absolute. It is available with 4-20mA 0-5V, 0-10V, a ratiometric 0.5 - 4.5V or 2mV/V outputs The unit has a stainless steel body and suitable for long-term installation outdoors. ...

Hammer Union Pressure Sensor

These 1502 hammer union pressure sensors are suitable to monitor pipelines up to 1000 Bar. Designed for harsh environments where high burst pressure and high vibrations are present. ...

Keller Series 33X Highly Precise Pressure Transmitters

The Series 33X is a high-precision Piezoresistive pressure transmitter with a highly accurate, mathematically compensated output signal. Standard accuracy is 0.05% of full scale for both RS485 serial and analog outputs, with the options of up to 0.01%FS accuracy. The RS485 comms allow the Control Center Series 30 (CCS30) software, ...

P600FA Field Adjustable Pressure Transmitters

The P600FA is a field adjustable pressure transmitter for high pressure ranges of 0-1000 and 0-5000 Bar. Outputs available are 4-20mA, 0-5V, 0-10V and 10mV/V. The units are constructed from Titanium using Silicon on Sapphire technology with a stainless steel body for long term performance. Optional ATEX approval. ...

P642FAX Field Adjustable Pressure Transmitters

The P642FAX is an ATEX Certified pressure transmitter available with ranges from 0-500 mBar to 0-5000 Bar with the availability of field adjustments to both span and zero by up to ±10%. The units have a stainless steel body and a Titanium media connection that is compatible with a wide ...

PTM Programmable Pressure Transmitter with 4-20mA, RS485 Output

The PTM485 Programmable pressure transmitter, is available in ranges up to 1000 bar G. It has a 316L s/s housing and diaphragm, Viton seals and 1/4 G pressure connection. The RS485 output provides both pressure and temperature measurements in MODBUS protocol. The unit also has a 4 -20mA output for ...

Keller Series 23SX High Precision Piezoresistive Pressure Transmitters

The Series 23SX is a high precision piezoresistive pressure transmitter designed to combine the impressive features of the 23SY and 33X series pressure transmitters. 23SX Pressure Transmitter features a fully welded design of the 23SX with the highly accurate and scalable digital compensated electronics of the Series 33X. Offering a ...

Keller Series 23SY Temperature Compensated Pressure Transmitters

The Keller Series 23SY pressure transmitter has digital temperature compensation which provides accuracy of 0.3% over 0-50C or 0.4% over -10 to +80°C. It is available in pressure ranges from vacuum to 1000 bar gauge or absolute and can be supplied with 4-20mA, 0-5v, 0-10v or 0.5 - 4.5v outputs. ...

Keller RFID Pressure / Transponder Data Logger Series 21 D(C) RFID

The Keller Series 21 D RFID pressure transponder / data logger combines a piezo resistive pressure sensor with RFID technology to allow wireless reading and collection of pressure measurements, and in the DC version, downloading of logged data. The standard RFID unit is self powered. The DC, data logging version ...

Keller EXd Pressure Transmitters for Hazardous Applications, Series 23 ED / 25

These Keller pressure transmitters are approved for use in high explosion risk areas and are ATEX approved certified EXD. They provide stable and accurate measurements of absolute and gauge pressures of liquid and gaseous media in the pressure range between 200mBar and 300 Bar. Available with standard 1/4" BSP male ...

Static Pressure Sensor Heat Sink

This heat sink enables standard pressure sensors to be used on systems where the medium has a higher temperature than the sensor allows. The cooling fins effectively transfers the heat, depending on the ambient temperature. Systems with medium temperatures of up to 260 degrees C can be monitored without harming ...

Keller Series 23 & 25 Piezoresistive Pressure Transmitters

These piezoresistive pressure transmitter are designed for precision measurements in industrial applications for pressures ranging from 200mBar up to 1,000 Bar for liquids and gases. Series 23 has a standard ¼" BSP threaded connection, whilst series 25 has a ¼" BSP flush diaphragm pressure port. Output options include a 2-wire ...

Contact us

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.

A real person will answer the phone and deal with your enquiry

omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Standard Industrial Pressure Transmitters

Keller Piezoresistive Pressure Transmitters Series 21Y

P.Touch Pressure Sensor

P.Trace Pressure Sensor

PA600 Series Standard Industrial Pressure Transducers and Transmitters

PA600B Barometric Pressure Transmitter

Hammer Union Pressure Sensor

Keller Series 33X Highly Precise Pressure Transmitters

P600FA Field Adjustable Pressure Transmitters

P642FAX Field Adjustable Pressure Transmitters

PTM Programmable Pressure Transmitter with 4-20mA, RS485 Output

Keller Series 23SX High Precision Piezoresistive Pressure Transmitters

Keller Series 23SY Temperature Compensated Pressure Transmitters

Keller RFID Pressure / Transponder Data Logger Series 21 D(C) RFID

Keller EXd Pressure Transmitters for Hazardous Applications, Series 23 ED / 25

Static Pressure Sensor Heat Sink

Keller Series 23 & 25 Piezoresistive Pressure Transmitters

Keller Piezoresistive Pressure Transmitters Series 21Y

P.Touch Pressure Sensor

P.Trace Pressure Sensor

PA600 Series Standard Industrial Pressure Transducers and Transmitters

PA600B Barometric Pressure Transmitter

Hammer Union Pressure Sensor

Keller Series 33X Highly Precise Pressure Transmitters

P600FA Field Adjustable Pressure Transmitters

P642FAX Field Adjustable Pressure Transmitters

PTM Programmable Pressure Transmitter with 4-20mA, RS485 Output

Keller Series 23SX High Precision Piezoresistive Pressure Transmitters

Keller Series 23SY Temperature Compensated Pressure Transmitters

Keller RFID Pressure / Transponder Data Logger Series 21 D(C) RFID

Keller EXd Pressure Transmitters for Hazardous Applications, Series 23 ED / 25

Static Pressure Sensor Heat Sink

Keller Series 23 & 25 Piezoresistive Pressure Transmitters

Keller Piezoresistive Pressure Transmitters Series 21Y

P.Touch Pressure Sensor

P.Trace Pressure Sensor

PA600 Series Standard Industrial Pressure Transducers and Transmitters

PA600B Barometric Pressure Transmitter

Hammer Union Pressure Sensor

Keller Series 33X Highly Precise Pressure Transmitters

P600FA Field Adjustable Pressure Transmitters

P642FAX Field Adjustable Pressure Transmitters

PTM Programmable Pressure Transmitter with 4-20mA, RS485 Output

Keller Series 23SX High Precision Piezoresistive Pressure Transmitters

Keller Series 23SY Temperature Compensated Pressure Transmitters

Keller RFID Pressure / Transponder Data Logger Series 21 D(C) RFID

Keller EXd Pressure Transmitters for Hazardous Applications, Series 23 ED / 25

Static Pressure Sensor Heat Sink

Keller Series 23 & 25 Piezoresistive Pressure Transmitters

Contact us

8:30 AM to 5 PM Monday to Thursday8:30 AM to 3 PM on Friday.

We are here to help

Enquire now

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.