omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Edit Content
Need Help?

Digital Output Sensors

A Selection of sensors with a simple digital outputs. This covers everything from voltage detectors, to magnetic door sensors.

Edit Content

Horizonal Float Switches

The FLCS-01 Horizonal Float Switch is a digital output device optimised for straight forward liquid level detection in remote monitoring systems. Designed for horizontal side-entry installation, its polypropylene float and acetal housing with EPDM sealing ensure durability. The sensor provides a basic change of state via a reed switch, which ...
View Product
FLCS-01 Horizontal Float Switch

Horizontal Float Switch FLCS-01

Single pole float switch suitable for use with most liquids with a minimum specific gravity of 0.8. The sensors have an Acetal housing and Polypropylene float making this sensor suitable for use in drinking water, fuel or organic solvent applications. The float orientation determines whether the unit is normally open ...
View Product

Vertical Float Switch

A vertical float switch with an integral float magnet and an M8 x 1.25mm pitch thread with a choice of normally open or normally closed contacts. Capable of switching up to 200vDC at 10VA. With a 300mm cable length. Ideally suited to liquid and air conditioning condensate and industrial process ...
View Product

PS Differential Pressure Switch

The PS series switches are a cost effective solution for various applications in building automation systems in the HVAC/R industry. The PS series sensor include a field adjustable dial with switching ranges from 20-200 pascals up to 500-4500 pascals and maximum pressure of 50kPa. Switching contacts are rates to 3 ...
View Product
TSD800 Magnetic Door Switch

TSD800

The TSD800 is a magnetic door sensor with IP65 protection. Can be mounted to metal or wooden doors and windows. Provides a simple 'dry contact' relay output for monitoring by controller. Max 40V @ 0.2A Switching. Dimensions: 32 x 15 x 0mm, IP65. ...
View Product

TSS8030R

The TSS8030R is a smoke detector designed for early fire warning by detecting a fixed level of smoke concentration through infrared ray scattering in its optic chamber, with factory-preset sensitivity. Controlled by a microprocessor utilising an enhanced algorithm for self-compensation of chamber contamination, this smoke sensor features a relay output, ...
View Product

TSV101

TSV101 is an AC voltage detector with galvanic isolation. The unit provides a digital output for an AC voltage range of 0 to 250vAC, default switching point 170vAC, reduced to 85vAC by removing jumper. Dimensions: 85 x 35.1 x 23.5mm. Operating conditions: 0 to +40°C @ 5-85%RH (non-condensing). ...
View Product

PA-DPS Differential Air Pressure Switch

The PA-DPS range of differential air pressure switches are suitable for low differential pressure switching applications. These units are ideal for providing indication of fan status or filter dirty conditions in air, non-combustible, non-aggressive gases in air conditioning and ventilating installations. Adjustment ranges are available from 20 Pa up to ...
View Product
Threaded Barrel Magnetically Activated Reed Switch

Magnetic Reed Switch

The 59070 magnetic reed switch is a small barrel sensor with an M8 x 1.25 thread activated by a permanent magnet. Switching distance 12-20mm with SPST normally open or closed contacts. The sensor draws no current in the non-activated state, making it ideal for battery power applications. The sensor is ...
View Product
Edit Content

Horizonal Float Switches

The FLCS-01 Horizonal Float Switch is a digital output device optimised for straight forward liquid level detection in remote monitoring systems. Designed for horizontal side-entry installation, its polypropylene float and acetal housing with EPDM sealing ensure durability. The sensor provides a basic change of state via a reed switch, which can be configured as normally open or normally closed by simply rotating the float. It's ideal for indicating high or low levels in applications such ...
Add to basket
FLCS-01 Horizontal Float Switch

Horizontal Float Switch FLCS-01

Single pole float switch suitable for use with most liquids with a minimum specific gravity of 0.8. The sensors have an Acetal housing and Polypropylene float making this sensor suitable for use in drinking water, fuel or organic solvent applications. The float orientation determines whether the unit is normally open or normally closed allowing the sensors to be used for both switching on and off equipment. The sensor is designed for side entry mounting with ...
Read more

Vertical Float Switch

A vertical float switch with an integral float magnet and an M8 x 1.25mm pitch thread with a choice of normally open or normally closed contacts. Capable of switching up to 200vDC at 10VA. With a 300mm cable length. Ideally suited to liquid and air conditioning condensate and industrial process control applications. ...
Read more

PS Differential Pressure Switch

The PS series switches are a cost effective solution for various applications in building automation systems in the HVAC/R industry. The PS series sensor include a field adjustable dial with switching ranges from 20-200 pascals up to 500-4500 pascals and maximum pressure of 50kPa. Switching contacts are rates to 3 amps @ 250vAC, allowing the switch to be used for alarming, or to operate fan motors to maintain pressure or flow ranges. The PS switch ...
Add to basket
TSD800 Magnetic Door Switch

TSD800

The TSD800 is a magnetic door sensor with IP65 protection. Can be mounted to metal or wooden doors and windows. Provides a simple 'dry contact' relay output for monitoring by controller. Max 40V @ 0.2A Switching. Dimensions: 32 x 15 x 0mm, IP65. ...
Add to basket

TSS8030R

The TSS8030R is a smoke detector designed for early fire warning by detecting a fixed level of smoke concentration through infrared ray scattering in its optic chamber, with factory-preset sensitivity. Controlled by a microprocessor utilising an enhanced algorithm for self-compensation of chamber contamination, this smoke sensor features a relay output, enabling its use with controllers that have digital inputs operating in "dry contact" mode. Smoke sensitivity complies with EN 54-7:2000+ A1:2002; ...
Add to basket

TSV101

TSV101 is an AC voltage detector with galvanic isolation. The unit provides a digital output for an AC voltage range of 0 to 250vAC, default switching point 170vAC, reduced to 85vAC by removing jumper. Dimensions: 85 x 35.1 x 23.5mm. Operating conditions: 0 to +40°C @ 5-85%RH (non-condensing). ...
Add to basket

PA-DPS Differential Air Pressure Switch

The PA-DPS range of differential air pressure switches are suitable for low differential pressure switching applications. These units are ideal for providing indication of fan status or filter dirty conditions in air, non-combustible, non-aggressive gases in air conditioning and ventilating installations. Adjustment ranges are available from 20 Pa up to 2,000 Pa with a max operating pressure of 5,000 Pa. The switching knob is mounted under the cover to avoid tampering and the scale is ...
Add to basket
Threaded Barrel Magnetically Activated Reed Switch

Magnetic Reed Switch

The 59070 magnetic reed switch is a small barrel sensor with an M8 x 1.25 thread activated by a permanent magnet. Switching distance 12-20mm with SPST normally open or closed contacts. The sensor draws no current in the non-activated state, making it ideal for battery power applications. The sensor is also well suited to high moisture and contaminated environments. The reed contacts allow for millions of operations and will work through materials such as wood, ...
Add to basket

A Selection of sensors with a simple digital outputs. This covers everything from voltage detectors, to magnetic door sensors.

Horizonal Float Switches

The FLCS-01 Horizonal Float Switch is a digital output device optimised for straight forward liquid level detection in remote monitoring systems. Designed for horizontal side-entry installation, its polypropylene float and acetal housing with EPDM sealing ensure durability. The sensor provides a basic change of state via a reed switch, which ...
View Product
FLCS-01 Horizontal Float Switch

Horizontal Float Switch FLCS-01

Single pole float switch suitable for use with most liquids with a minimum specific gravity of 0.8. The sensors have an Acetal housing and Polypropylene float making this sensor suitable for use in drinking water, fuel or organic solvent applications. The float orientation determines whether the unit is normally open ...
View Product

Vertical Float Switch

A vertical float switch with an integral float magnet and an M8 x 1.25mm pitch thread with a choice of normally open or normally closed contacts. Capable of switching up to 200vDC at 10VA. With a 300mm cable length. Ideally suited to liquid and air conditioning condensate and industrial process ...
View Product

PS Differential Pressure Switch

The PS series switches are a cost effective solution for various applications in building automation systems in the HVAC/R industry. The PS series sensor include a field adjustable dial with switching ranges from 20-200 pascals up to 500-4500 pascals and maximum pressure of 50kPa. Switching contacts are rates to 3 ...
View Product
TSD800 Magnetic Door Switch

TSD800

The TSD800 is a magnetic door sensor with IP65 protection. Can be mounted to metal or wooden doors and windows. Provides a simple 'dry contact' relay output for monitoring by controller. Max 40V @ 0.2A Switching. Dimensions: 32 x 15 x 0mm, IP65. ...
View Product

TSS8030R

The TSS8030R is a smoke detector designed for early fire warning by detecting a fixed level of smoke concentration through infrared ray scattering in its optic chamber, with factory-preset sensitivity. Controlled by a microprocessor utilising an enhanced algorithm for self-compensation of chamber contamination, this smoke sensor features a relay output, ...
View Product

TSV101

TSV101 is an AC voltage detector with galvanic isolation. The unit provides a digital output for an AC voltage range of 0 to 250vAC, default switching point 170vAC, reduced to 85vAC by removing jumper. Dimensions: 85 x 35.1 x 23.5mm. Operating conditions: 0 to +40°C @ 5-85%RH (non-condensing). ...
View Product

PA-DPS Differential Air Pressure Switch

The PA-DPS range of differential air pressure switches are suitable for low differential pressure switching applications. These units are ideal for providing indication of fan status or filter dirty conditions in air, non-combustible, non-aggressive gases in air conditioning and ventilating installations. Adjustment ranges are available from 20 Pa up to ...
View Product
Threaded Barrel Magnetically Activated Reed Switch

Magnetic Reed Switch

The 59070 magnetic reed switch is a small barrel sensor with an M8 x 1.25 thread activated by a permanent magnet. Switching distance 12-20mm with SPST normally open or closed contacts. The sensor draws no current in the non-activated state, making it ideal for battery power applications. The sensor is ...
View Product

Contact us

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.

A real person will answer the phone and deal with your enquiry
Sales & Technical support

We are here to help

Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

Call us on +44 (0)1382 443000

Enquire now