Horizontal Float Switch FLCS-01
Single pole float switch suitable for use with most liquids with a minimum specific gravity of 0.8. The sensors have an Acetal housing and Polypropylene float making this sensor suitable for use in drinking water, fuel or organic solvent applications. The float orientation determines whether the unit is normally open..
Vertical Float Switch
A vertical float switch with an integral float magnet and an M8 x 1.25mm pitch thread with a choice of normally open or normally closed contacts. Capable of switching up to 200vDC at 10VA. With a 300mm cable length. Ideally suited to liquid and air conditioning condensate and industrial process..
Water Leak Detection Sensor – TSF400
The TSF400-0 is a water leak detection sensor designed for detecting the presence of water on a surface without the need for a separate alarm module. The sensor uses 5 electrodes on the base of the sensor and trips when one of the four outer electrodes connects to the central..
Water Detection Alarm System WD-AMX
The WD-AMX range of water leak detection modules are designed for use with the WD-CS, WD-PS and WD-RS range of water leak detection sensors. They are suitable for DIN-rail mounting inside AHUs, power distribution units or general areas where leak detection is required...
WLM4 – Four Channel Water Leak Detection Module
The WLM4 Water Leak Detection Module has 4 input channels with zone indication and 1 common output with fault indication. DIN Rail or wall mount options. The WLM4 can be used with a combination of water detection sensors...
PS Series Differential Pressure Switch
The PS Series Differential Pressure Switches are a cost effective solution for various applications in building automation systems in the HVAC/R industry. The PS series switch includes a field adjustable dial with switching ranges from 20-200 pascals up to 500-4500 pascals and maximum pressure of 50kPa. Switching contacts are rates..
TSD800
The TSD800 is a magnetic door sensor with IP65 protection. Can be mounted to metal or wooden doors and windows. Provides a simple 'dry contact' relay output for monitoring by controller. Max 40V @ 0.2A Switching. Dimensions: 32 x 15 x 0mm, IP65...
TSS8030R
The TSS8030R is a smoke detector designed for early fire warning by detecting a fixed level of smoke concentration through infrared ray scattering in its optic chamber, with factory-preset sensitivity. Controlled by a microprocessor utilising an enhanced algorithm for self-compensation of chamber contamination, this smoke sensor features a relay output,..
TSV101
TSV101 is an AC voltage detector with galvanic isolation. The unit provides a digital output for an AC voltage range of 0 to 250vAC, default switching point 170vAC, reduced to 85vAC by removing jumper. Dimensions: 85 x 35.1 x 23.5mm. Operating conditions: 0 to +40°C @ 5-85%RH (non-condensing)...
PA-DPS Differential Air Pressure Switch
The PA-DPS range of differential air pressure switches are suitable for low differential pressure switching applications. These units are ideal for providing indication of fan status or filter dirty conditions in air, non-combustible, non-aggressive gases in air conditioning and ventilating installations. Adjustment ranges are available from 20 Pa up to..
Magnetic Reed Switch
The 59070 magnetic reed switch is a small barrel sensor with an M8 x 1.25 thread activated by a permanent magnet. Switching distance 12-20mm with SPST normally open or closed contacts. The sensor draws no current in the non-activated state, making it ideal for battery power applications. The sensor is..
