The Windsonic M Ultrasonic anemometer provides wind speed and direction in the range of 0-60m/s. The WindSonic M is a durable, hard-anodised aluminium alloy housing with an optional heating system allowing for operations down to -40°C. Readings can be provided as an RS232, RS422, or RS485 Serial or two analogue outputs. Units are supplied with mating connector and WindCom software for logging data directly from the serial output.
The WindSonic M features an impact resistant, corrosion-free, hard anodised Aluminium alloy housing with optional heating system to the same proven WindSonic technology. The WindSonic M Ultrasonic anemometer is ideally suited to the harshest environmental conditions. This can be Marine or low temperature installations as low as -40°C with the optional heating.
| Wind Speed Range | 0-60m/s (0-116 knots) | |||
| Wind Direction | 0-360° (no dead band) | |||
| Starting Threshold | 0.01m/s | |||
| Accuracy | Wind Speed 2%, Direction 2° @ 12m/s | |||
| Resolution | Wind Speed 0.01m/s, Direction 0.1° | |||
| Ultrasonic Output Rate | 0.25, 0.5, 1, 2 or 4Hz | |||
| Parameters | Speed & Direction or U & V Vectors | |||
| Units | m/s, knots, mph, kph, ft/min | |||
| Power Supply | 5-30vDC (Output Dependant) | |||
| Housing Material | Al Alloy 6061 T6 with Hard Anodised finish | |||
| Size | 142 x 163mm | |||
| Weight | 0.9Kg | |||
WindSonic M Output Options
| Heating Option: | 24vAC/DC (4.2A @ 24V) |
| Option 1: | RS232, RS422, RS485 and NMEA |
| Option 2: | RS232, RS422, RS485 and NMEA plus 2 x Analogue Outputs: 0-5V, 0-20mA or 4-20mA |
| Baud Rates: | 2400 to 38400. |
| Anemometer Status: | Supplied as part of standard message |
1405-PK-300
£1,463.00
1405-PK-301
£1,622.00
1405-PK-200
£1,647.00
1405-PK-201
£1,807.00
1771-PK-115
£272.00
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
