The WindObserver II provides wind speed and direction data via 1 digital and 3 analogue outputs and features an IP66 rated stainless steel housing, which is particularly suitable for use in salt-water environments. The anemometer also has an optional anti-icing heating option enabling the sensor to operate effectively in extreme environmental conditions, like those experienced at high altitude or at sea. The WindObserver II has been type approved by the Lloyds Register for use in marine and offshore applications.
| Range: | 0-65m/s (0-145mph) |
| Starting Threshold: | 0.01m/s |
| Accuracy: | ±2% @ 12m/s |
| Resolution: | 0.01m/s |
| Range: | 0-360° (no dead band) |
| Accuracy: | ±2° @ 12m/s |
| Resolution: | 1° |
| Ultrasonic Output Rate: | 1, 2, 4, 5, 8, 10Hz |
| Parameters: | UV, Polar, NMEA, Tunnel |
| Units: | m/s, knots, mph, kph, ft/min |
| Average (Selectable): | Rolling Average – 1, 2, 10 m.n, Gusts -3s |
| Block Average: | 0-3600 Seconds |
| Communication: | RS422/RS485 full duplex/half duplex |
| Baud Rates: | 1200, 2400, 4800, 9600, 19200, 38400. |
| Formats: | 8 bit data; odd, even or no parity |
| Anemometer Statue: | Supplied as part of standard message |
| Quantity: | 3 (Speed, Direction, Status or Sonic Temp) |
| Scale: | Multiples of ±10m/s up to ±70m/s |
| Type: | ±2.5V, 0-5V or 4-20mA |
| V Output Resistance: | 60 Ohms |
| 4-20mA loading: | 10-300 Ohms |
| Anemometer Only: | 9-30vDC (40mA @ 12vDC) |
| Heating (Optional): | 3A @ 24vDC |
| External Construction: | 316 Stainless Steel |
| Size: | 381 x 213mm |
| Weight: | 1.4Kg (excluding base & cable) |
1390-PK-026
£2,532.00
1390-PK-027
£2,822.00
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
