The P501 RIPS (Rotary Inductive Position Sensor) suitable for OEM applications. Each unit is supplied with the output calibrated to the angle required by the customer, between 30 and 140 degrees. It is particularly suitable for OEMs seeking good sensor performance for arduous applications where space is important.
Overall performance, repeatability and stability are outstanding over a wide temperature range. The sensor has a rugged nickel plated aluminium body and integrated mounting flange. The flange has two 4.3mm by 20 degree wide slots on a 48mm pitch to simplify mounting and position adjustment. Sealing is to IP67 (boot version) and full EMC protection is built in.
Specifications
| Dimensions | |||
|
Body Diameter
|
28.3mm (solder pins option) 30.8mm (cable boot option) | ||
|
Body Length (to seal face)
|
23.2mm | ||
|
Shaft
|
8.5mm, OD 4mm | ||
| For full mechanical details see drawing | |||
|
Measurement range |
Any angle from ±15° to ±70° | ||
|
Independant Linearity |
<±0.25° for 80° | ||
|
Temperature Coefficient |
<±0.01%/°C Gain & <±0.01%FS/°C Offset | ||
|
Typical Overall Accuracy |
<±0.75% FSO | ||
|
Resolution |
Infinite | ||
|
Noise |
<0.02% FSO | ||
|
Frequency Response |
>10KHz (-3dB); | ||
|
Output Signal and Output Load |
|
||
|
|||
|
Power Supply |
|
||
|
Temperature Limits |
|||
|
Operating |
-40 to +125°C | ||
|
Storage |
-40 to +125°C | ||
|
EMC Performance |
|||
|
Susceptibility |
EN 61000-6-2 | ||
|
Radiated |
EN 61000-6-3 | ||
|
Vibration |
IEC 68-2-6: 10g | ||
|
Shock |
IEC 68-2-29: 40 g | ||
|
MTBF |
350,000 hrs 40°C Gf | ||
|
Sealing |
IP67 (boot version) | ||
|
Electrical Connections |
Screened 3 core cable with boot or solder pins |
When using the part builder below options marked with * must have an item selected to complete the correct part number.
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
