Skip to content

omni instruments | sensors and data acquisition equipment

Omni Instruments Ltd

Sales & Technical Support

  • +44 (0) 1382 443000
  • info@omni.uk.com
Omni Instruments Ltd
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
Products
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
Need Help?
£0.00 0 Basket
Product
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
£0.00 0 Basket

Products

Home / Products
  • Grid View
  • List View

17124975-M

Replacement MX6 Catalytic Sensor for Methane (CH4) Range 0 to 5% Volume, Resolution 0.01% Vol. Response time 10 seconds. This MX6 replacement cell is supplied calibrated for Methane. Exposure to other flammable gases can generate higher than expected readings...
View Product

17124975-N

Replacement MX6 Infrared Sensor for Methane (CH4) Range 0 to 100% Volume, Resolution 1% Vol. Response time 13 seconds. This MX6 replacement cell is supplied calibrated for Methane. Exposure to other flammable gases can provide higher than expected readings...
View Product

17124975-P

Replacement MX6 Infrared Sensor for Hydrocarbons (Propane). Range 0 to 100% Volume, Resolution 1% Vol...
View Product
MX2 CO2 Cell - 17124975-Q

17124975-Q

Replacement MX6 Infrared Sensor for Carbon Dioxide (CO2). Range 0 to 5% Volume, Resolution 0.01% Vol. Response time 10 seconds (T50)..
View Product

17124975-R

Replacement MX6 PhotoIonization Detector Sensor for Volatile Organic Compounds. Range 0-2,000 ppm, Resolution 0.1ppm. Response time 15 seconds..
View Product

17124975-S

Replacement MX6 Infrared Sensor for Methane (CH4). Range 0 to 100%LEL, Resolution 1%LEL. Response time 10 seconds. This MX6 replacement cell is supplied calibrated for Methane. Exposure to other flammable gases can provide higher than expected readings...
View Product

NPL-RECAL-11 POINTS

UKAS traceable calibration of customers own pressure sensors. Pressure Calibration to 11 points. All ranges between -0.8 and 1,000 Bar. Certificate shows actual output readings in graph and table form. Maximum errors shown at each point as a percentage. Certificate is timed, dated and has a unique reference for complete..
View Product

97RA

6 digit LED display, AC frequency input for flow rate, suitable for displaying flow rate from turbine meters with AC output. Frequncy range 1-10,000 Hz, accuracy 0.05% of reading, power supply 8-13v DC, operating temperature 0-50 deg C, dimensions 96 x 48 x 104mm deep...
View Product

CAL3AXISROTATE

Calibration 3 Axis - Rotate (Wind Tunnel). The calibration procedure involves a fixed wind velocity and the unit is rotated from 0 to 360 Degrees in 180 separate steps, providing a reading every 2 Degrees. The calibration certificate then compares the fixed wind velocity of the wind tunnel to the..
View Product

CDI-PSO

CDI-PSO Pressure Sensing Option for the CDI compressed air flow meters. Range 0-145 PSIg (0-10 BarG). Output 4-20mA. Only available one new meters and not available as a retrofit to existing meters...
View Product

E3-01A

1m White extension cable for HC2 Probe with connector...
View Product

GS-61

Transmitters for use with external probes - Wired sockets for 8 x state indications (e.g. door open/close)..
View Product

LEO2-CALIBRATION-UKAS

Calibration of Leo 1 & Leo 2 manometers calibrated in accordance with ISO/IEC 17025:2005 by UKAS accredited calibration laboratories..
View Product

SWCD-0040

Tinytag Explorer software with English quick start guide. This software will guide you through setting up your Tinytag data loggers and can provide a printout of your settings for verification. It will also help you explore the more advanced features available. The Tinytag software comes with a site licence allowing..
View Product

E3-05A

5m White extension cable for HC2 Probe with connector...
View Product

SWCD-0080

Tinytag Explorer Connect Software with English, French, German, Italian, Spanish and Swedish quick start guide. This software will guide you through setting up your Tinytag data loggers and can provide a printout of your settings for verification. It allows for continuous environmental monitoring, stay connected to your data with Tinytag..
View Product

SWCD-0100-ANN

Tinytag DI Secure Software allows users to manage and monitor who has access to your data loggers and what they can do with them, review activity history in the audit log and maintain accurate, traceable and reliable data in a closed, secure data logging system. In regulated industries where rigorous..
View Product

SWCD-0100-PER

Tinytag DI Secure Software allows users to manage and monitor who has access to your data loggers and what they can do with them, review activity history in the audit log and maintain accurate, traceable and reliable data in a closed, secure data logging system. In regulated industries where rigorous..
View Product

SWCD-0100-SUP

Annual Licence Renewal for the Tinytag DI Secure Software...
View Product

E3-01XX

1m White extension cable for HC2 Probe with flying leads..
View Product

E3-02XX

2m White extension cable for HC2 Probe with flying leads..
View Product

GS-62

Transmitters for use with external probes - Wired sockets for 2 x pulse inputs (voltage-free or digital)..
View Product

LEO-REC-CALIBRATION-UKAS

Calibration of Leo Record Manometers calibrated in accordance with ISO/IEC 17025:2017 by UKAS accredited calibration laboratories..
View Product

E3-05XX

5m White extension cable for HC2 Probe with flying leads..
View Product
Previous Page1 … Page5 Next

17124975-M

Replacement MX6 Catalytic Sensor for Methane (CH4) Range 0 to 5% Volume, Resolution 0.01% Vol. Response time 10 seconds. This MX6 replacement cell is supplied calibrated for Methane. Exposure to other flammable gases can generate higher than expected readings. ...
View Product

17124975-N

Replacement MX6 Infrared Sensor for Methane (CH4) Range 0 to 100% Volume, Resolution 1% Vol. Response time 13 seconds. This MX6 replacement cell is supplied calibrated for Methane. Exposure to other flammable gases can provide higher than expected readings. ...
View Product

17124975-P

Replacement MX6 Infrared Sensor for Hydrocarbons (Propane). Range 0 to 100% Volume, Resolution 1% Vol. ...
View Product
MX2 CO2 Cell - 17124975-Q

17124975-Q

Replacement MX6 Infrared Sensor for Carbon Dioxide (CO2). Range 0 to 5% Volume, Resolution 0.01% Vol. Response time 10 seconds (T50) ...
View Product

17124975-R

Replacement MX6 PhotoIonization Detector Sensor for Volatile Organic Compounds. Range 0-2,000 ppm, Resolution 0.1ppm. Response time 15 seconds ...
View Product

17124975-S

Replacement MX6 Infrared Sensor for Methane (CH4). Range 0 to 100%LEL, Resolution 1%LEL. Response time 10 seconds. This MX6 replacement cell is supplied calibrated for Methane. Exposure to other flammable gases can provide higher than expected readings. ...
View Product

NPL-RECAL-11 POINTS

UKAS traceable calibration of customers own pressure sensors. Pressure Calibration to 11 points. All ranges between -0.8 and 1,000 Bar. Certificate shows actual output readings in graph and table form. Maximum errors shown at each point as a percentage. Certificate is timed, dated and has a unique reference for complete traceablility. ...
View Product

97RA

6 digit LED display, AC frequency input for flow rate, suitable for displaying flow rate from turbine meters with AC output. Frequncy range 1-10,000 Hz, accuracy 0.05% of reading, power supply 8-13v DC, operating temperature 0-50 deg C, dimensions 96 x 48 x 104mm deep. ...
View Product

CAL3AXISROTATE

Calibration 3 Axis - Rotate (Wind Tunnel). The calibration procedure involves a fixed wind velocity and the unit is rotated from 0 to 360 Degrees in 180 separate steps, providing a reading every 2 Degrees. The calibration certificate then compares the fixed wind velocity of the wind tunnel to the readings collected by the unit at each step as a percentage error. ...
View Product

CDI-PSO

CDI-PSO Pressure Sensing Option for the CDI compressed air flow meters. Range 0-145 PSIg (0-10 BarG). Output 4-20mA. Only available one new meters and not available as a retrofit to existing meters. ...
View Product

E3-01A

1m White extension cable for HC2 Probe with connector. ...
View Product

GS-61

Transmitters for use with external probes - Wired sockets for 8 x state indications (e.g. door open/close) ...
View Product

LEO2-CALIBRATION-UKAS

Calibration of Leo 1 & Leo 2 manometers calibrated in accordance with ISO/IEC 17025:2005 by UKAS accredited calibration laboratories ...
View Product

SWCD-0040

Tinytag Explorer software with English quick start guide. This software will guide you through setting up your Tinytag data loggers and can provide a printout of your settings for verification. It will also help you explore the more advanced features available. The Tinytag software comes with a site licence allowing installation on multiple PCs at the same location, additional software should be purchased when used at a different site location. * Please note that the ...
View Product

E3-05A

5m White extension cable for HC2 Probe with connector. ...
View Product

SWCD-0080

Tinytag Explorer Connect Software with English, French, German, Italian, Spanish and Swedish quick start guide. This software will guide you through setting up your Tinytag data loggers and can provide a printout of your settings for verification. It allows for continuous environmental monitoring, stay connected to your data with Tinytag Explorer Connect: data logging software for Tinytag Radio and LAN data loggers, with optional mobile/cellular connectivity (4G) ...
View Product

SWCD-0100-ANN

Tinytag DI Secure Software allows users to manage and monitor who has access to your data loggers and what they can do with them, review activity history in the audit log and maintain accurate, traceable and reliable data in a closed, secure data logging system. In regulated industries where rigorous digital record-keeping is paramount, Tinytag DI can aid compliance with data governance standards. This software is supplied with a One Year Licence and needs to ...
View Product

SWCD-0100-PER

Tinytag DI Secure Software allows users to manage and monitor who has access to your data loggers and what they can do with them, review activity history in the audit log and maintain accurate, traceable and reliable data in a closed, secure data logging system. In regulated industries where rigorous digital record-keeping is paramount, Tinytag DI can aid compliance with data governance standards. This software is supplied with a Perpetual licence and needs no annual ...
View Product

SWCD-0100-SUP

Annual Licence Renewal for the Tinytag DI Secure Software. ...
View Product

E3-01XX

1m White extension cable for HC2 Probe with flying leads ...
View Product

E3-02XX

2m White extension cable for HC2 Probe with flying leads ...
View Product

GS-62

Transmitters for use with external probes - Wired sockets for 2 x pulse inputs (voltage-free or digital) ...
View Product

LEO-REC-CALIBRATION-UKAS

Calibration of Leo Record Manometers calibrated in accordance with ISO/IEC 17025:2017 by UKAS accredited calibration laboratories ...
View Product

E3-05XX

5m White extension cable for HC2 Probe with flying leads ...
View Product

17124975-M

Replacement MX6 Catalytic Sensor for Methane (CH4) Range 0 to 5% Volume, Resolution 0.01% Vol. Response time 10 seconds. This MX6 replacement cell is supplied calibrated for Methane. Exposure to other flammable gases can generate higher than expected readings...
View Product

17124975-N

Replacement MX6 Infrared Sensor for Methane (CH4) Range 0 to 100% Volume, Resolution 1% Vol. Response time 13 seconds. This MX6 replacement cell is supplied calibrated for Methane. Exposure to other flammable gases can provide higher than expected readings...
View Product

17124975-P

Replacement MX6 Infrared Sensor for Hydrocarbons (Propane). Range 0 to 100% Volume, Resolution 1% Vol...
View Product
MX2 CO2 Cell - 17124975-Q

17124975-Q

Replacement MX6 Infrared Sensor for Carbon Dioxide (CO2). Range 0 to 5% Volume, Resolution 0.01% Vol. Response time 10 seconds (T50)..
View Product

17124975-R

Replacement MX6 PhotoIonization Detector Sensor for Volatile Organic Compounds. Range 0-2,000 ppm, Resolution 0.1ppm. Response time 15 seconds..
View Product

17124975-S

Replacement MX6 Infrared Sensor for Methane (CH4). Range 0 to 100%LEL, Resolution 1%LEL. Response time 10 seconds. This MX6 replacement cell is supplied calibrated for Methane. Exposure to other flammable gases can provide higher than expected readings...
View Product

NPL-RECAL-11 POINTS

UKAS traceable calibration of customers own pressure sensors. Pressure Calibration to 11 points. All ranges between -0.8 and 1,000 Bar. Certificate shows actual output readings in graph and table form. Maximum errors shown at each point as a percentage. Certificate is timed, dated and has a unique reference for complete..
View Product

97RA

6 digit LED display, AC frequency input for flow rate, suitable for displaying flow rate from turbine meters with AC output. Frequncy range 1-10,000 Hz, accuracy 0.05% of reading, power supply 8-13v DC, operating temperature 0-50 deg C, dimensions 96 x 48 x 104mm deep...
View Product

CAL3AXISROTATE

Calibration 3 Axis - Rotate (Wind Tunnel). The calibration procedure involves a fixed wind velocity and the unit is rotated from 0 to 360 Degrees in 180 separate steps, providing a reading every 2 Degrees. The calibration certificate then compares the fixed wind velocity of the wind tunnel to the..
View Product

CDI-PSO

CDI-PSO Pressure Sensing Option for the CDI compressed air flow meters. Range 0-145 PSIg (0-10 BarG). Output 4-20mA. Only available one new meters and not available as a retrofit to existing meters...
View Product

E3-01A

1m White extension cable for HC2 Probe with connector...
View Product

GS-61

Transmitters for use with external probes - Wired sockets for 8 x state indications (e.g. door open/close)..
View Product

LEO2-CALIBRATION-UKAS

Calibration of Leo 1 & Leo 2 manometers calibrated in accordance with ISO/IEC 17025:2005 by UKAS accredited calibration laboratories..
View Product

SWCD-0040

Tinytag Explorer software with English quick start guide. This software will guide you through setting up your Tinytag data loggers and can provide a printout of your settings for verification. It will also help you explore the more advanced features available. The Tinytag software comes with a site licence allowing..
View Product

E3-05A

5m White extension cable for HC2 Probe with connector...
View Product

SWCD-0080

Tinytag Explorer Connect Software with English, French, German, Italian, Spanish and Swedish quick start guide. This software will guide you through setting up your Tinytag data loggers and can provide a printout of your settings for verification. It allows for continuous environmental monitoring, stay connected to your data with Tinytag..
View Product

SWCD-0100-ANN

Tinytag DI Secure Software allows users to manage and monitor who has access to your data loggers and what they can do with them, review activity history in the audit log and maintain accurate, traceable and reliable data in a closed, secure data logging system. In regulated industries where rigorous..
View Product

SWCD-0100-PER

Tinytag DI Secure Software allows users to manage and monitor who has access to your data loggers and what they can do with them, review activity history in the audit log and maintain accurate, traceable and reliable data in a closed, secure data logging system. In regulated industries where rigorous..
View Product

SWCD-0100-SUP

Annual Licence Renewal for the Tinytag DI Secure Software...
View Product

E3-01XX

1m White extension cable for HC2 Probe with flying leads..
View Product

E3-02XX

2m White extension cable for HC2 Probe with flying leads..
View Product

GS-62

Transmitters for use with external probes - Wired sockets for 2 x pulse inputs (voltage-free or digital)..
View Product

LEO-REC-CALIBRATION-UKAS

Calibration of Leo Record Manometers calibrated in accordance with ISO/IEC 17025:2017 by UKAS accredited calibration laboratories..
View Product

E3-05XX

5m White extension cable for HC2 Probe with flying leads..
View Product

CONTACT US

8:30am to 5pm Monday to Thursday
8:30am to 3pm on Friday.

  • +44 (0) 1382 443000
  • info@omni.uk.com

A real person will answer the phone and deal with your enquiry.
You can also click the button below and fill in our online enquiry form.

Technical Sales

links

  • About
  • Contact
  • Custom Systems
  • Privacy & Cookies
  • Terms & Conditions

omni instruments

Omni Instruments Ltd,
Unit 1, 14 Nobel Road,
Wester Gourdie Industrial Estate,
Dundee, DD2 4UH, UK

Sales & Support

  • +44 (0) 1382 443000
  • info@omni.uk.com

Payments

mastercard-color
visa-color
amex-color
Copyright Omni Instruments 2026 | Design. Build. Host.

        We are here to help

        Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

        Call us on +44 (0)1382 443000