ADAPTOR1/4BSPF-1/4NPTM
1/4 inch BSP female to 1/4 inch NPT male adaptor. Converts a standard LEO2 manometers from 1/4 inch BSP to 1/4 inch NPT thread. Stainless Steel constructions suitable for low pressure applications only...
LOADBUTM20X2.5
Load Buttons are used to align extraneous forces through the principle axis of a load cell. Stainless Steel construction: Dimensions: 33mm Diameter, 14mm Button and M20 x 2.5 Male Right-hand Thread, 26mm thread length...
SPA-PE
Polyethylene Filters for Industrial Hygroclip probes. Polyethylene Filter Sleeve (Pore size 40-50µm)..
SPA-PTFE
Teflon Filter for Industrial Hygroclip Probes Teflon Filter Sleeve (Pore size 10µm)..
SPA20003
SPA Dual Barometer Board, provides altitude and airspeed sensing for air vehicles. A pair of temperature compensated pressure sensors allow absolute and differential pressure sensing...
SPA20422
Air Data System board with serial output for airspeed ( pitot pressure ), altitude ( barometric pressure ), internal and external temperature...
SQ2010 Data Logger Hire
The Squirrel 2010 is a versatile, general purpose logger, with 4 to 8 analogue input channels to measure current, voltage, resistance and temperature (thermocouples), plus 8 digital channels and two counter inputs. The loggers Internal 1.8 million reading memory and long battery life make this an ideal unit for remote..
SQ2010-MINIAIR6
Squirrel 2010 data logger, 4 differential or 4 single ended channels, suitable for thermocouple, mV, V and mA inputs, 24bit resolution, 1.8 million readings, LCD display, up to 20Hz logging rate, USB interface, includes SquirrelView software. MiniAir6 micro 0.5 to 20m/s +/-1% FS, -10 to +80C, 6.5V to 26VDC 11mm..
SQ2040-2F16
Squirrel 2040-2F16 has 32 single ended inputs or 16 differential inputs, 2 fast channels at a maximum sampling rate of 100Hz including SquirrelView software for logger configuration, USB data transfer cable for connection to PC, a set of batteries and a mounting bracket...
SQ2040-2F16 Data Logger Hire
The SQ2040-2F16 is a portable handheld data logger with up to 32 analogue inputs suitable for voltage, current or resistance inputs. The unit can also accept thermistor, thermocouples and RTD temperature measurements, plus 4 Pulse and 8 digital state inputs. 1.8 million readings internal memory with an option for expansion..
SQ2040-2F16 HIRE
With 32 single ended inputs or 16 differential inputs, 2 fast channels at a maximum sampling rate of 100Hz including SquirrelView software for logger configuration, USB data transfer cable for connection to PC, a set of batteries and a mounting bracket. Hir per week..
SQ2040-2F16 WIFI
Squirrel 2040-2F16, 16 differential or 32 single ended channels, 24bit resolution, 14 million readings, LCD display, 100Hz logging on 2 channels, USB interface, includes SquirrelView software and Wi-Fi Connectivity to allow direct connection to a standard PC wireless Ethernet network...
SQ2040-4F16
Squirrel 2040-4F16, 16 differential or 32 single ended channels, suitable for 16 x 4 wire PT100 sesnors, 24bit resolution, 14 million readings, internal memory capacity, with LCD display, 100Hz logging mode on 4 channels, USB interface, includes SquirrelView software..
SQ2040-4F16 WIFI
Squirrel 2040-4F16, 16 differential or 32 single ended channels, suitable for 16 x 4 wire PT100 sensors, 24bit resolution, 14 million readings, internal memory capacity, with LCD display, 100Hz logging mode on 4 channels, USB interface, includes SquirrelView software and Wi-Fi Connectivity to allow direct connection to a standard PC..
SQ20A801
Serial ethernet converter kit. Converts the original Squirrel data loggers RS232 output into Ethernet...
SQDIGICAB
25 pin DIN connector with 1 metre of cable terminated to terminal block ( screw terminals ) for digital and pulse inputs..
SRP-N118-SIR-15
IR remote controller for the SRP-N118 process meter. Allows changes to settings without opening the protective case...
SRT-94-1333-1-3-001
Digital display, 4 digit 20mm red LED. Pt100, Pt500, Pt1000 thermoresistance inputs & 2 relay and 1 0-24mA outputs. Power supply 24V DC...
SRT-94-1333-1-4-001
Digital display, 4 digit 20mm red LED. Pt100, Pt500, Pt1000 thermoresistance inputs & 2 relay and 1 0-24mA outputs. Power supply 85-260V AC/DC...
SRT-94-1A33-1-3-001
Digital display, 4 digit 20mm red LED. Type K, S, J, T, N, R, B, E thermocouple inputs & 2 relay and 1 0-24mA outputs. Power supply 24V DC...
SSA-20024-CON
SSA-SERIES SERVO mating connector, 44 pin with shell...
SSA20024
The Servo Switch / Controller (SSC) is a highly configurable, multiplexing switch for servo command signals. The SSC can be used to control RC servo or other UAV servo devices. It allows the dynamic selection of servo command signals from several pulse signal sources. Pulse sources include asynchronous serial communication..
