Skip to content

omni instruments | sensors and data acquisition equipment

Omni Instruments Ltd

Sales & Technical Support

  • +44 (0) 1382 443000
  • info@omni.uk.com
Omni Instruments Ltd
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
Products
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
Need Help?
£0.00 0 Basket
Product
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
£0.00 0 Basket

Products

Home / Products
  • Grid View
  • List View

PA1508

8 inputs and 8 outputs, 24V, optically isolated, isolation between all input channels, high-side driver outputs 500 mA, for each channel, watchdog, short-circuit protection..
View Product

PA1700-2

High-speed 3-channel (32-bit) or 6-channel (16-bit) pulse acquisition for incremental encoders, TTL or differential counter inputs for pulse width or frequency measurement, detection of line break..
View Product

PA2000

32 optically isolated digital outputs, 24 V, high-side driver outputs 500 mA, timer, watchdog, short-circuit protection..
View Product

PA302-16

A/D converter,16 single-ended or 8 diff. inputs, 12-bit, 125 kHz, timer, with amplifier, filter and current inputs..
View Product

PA33X/81601.25-1360BAR-4-RS485-UNF/LH-INC

Keller Series 33 Subsea Transmitter. Range 0-1360 Bar sealed gauge with ¼-28UNF-2A Male Left Hand Autoclav male thread . With 4-20mA output, total error band 0.10% and RS485 output, total error band 0.05%. Subsea housing, external case pressure 400 Bar, with 5 pole MCBH5M miniature subcon connector. Pin 1 GND/Output,..
View Product

PA33XEI-300

PA33X pressure transmitter, 0 - 300 barG, 4-20mA & RS485 O/P, I.S...
View Product

Pace AC Current & AC Voltage Sensors

Self powered AC current and AC voltage sensors. Easy to install and work with a large range of data loggers and monitoring systems including the Pace XR5 and XR440 range. The SC Series of split core current sensors are available with a 0-5vDC output and cover current ranges up to..
View Product
3G LogBox Connect Data Logger

8813006000

LogBox Connect 3G Data Logger. 2 Universal analogue, one digital input, plus single NPN output. Thermocouples (Type J, K, T, N, E, R, S or B) PT100, 0-50mV, 0-5V, 0-10V, 0-20mA, 4-20mA. Internal sensors: Battery voltage and external power supply. Internal memory 140,000 readings with 15 bit resolution and 1..
View Product
HC2A-S3H Meteorological Temp/RH Probe with Calibration

HC2A-S3H

High Accuracy Meteorological Temperature and Relative Humidity Probe with UKAS Calibration. Temperature Range: -50 to +100°C and Humidity 0-100%. Accuracy: ±0.1°C and ±0.5%RH, adjustments at 23 °C and 10, 20, 30, 40, 50, 60, 70, 80, 90 %RH. Outputs: 0-1V. Comes with a white Polycarbonate housing and a white Polyethylene..
View Product

Pace Relative Humidity, Temperature and Light Probes

Measure temperature and humidity with your XR440 and XR5 data logger. These probes need no external power and are ideal for indoor and outdoor (with shield) measurements. Uses two channels, one for temperature and the other for humidity. You can convert your reading to wet bulb or dew point measurements..
View Product

RODENDM45X3.0

Rod End Bearing to align extraneous forces through the principle axis of a load cell. M45 x 3.0 Male Right-hand Thread Construction: Hard Chromium/PTFE composite/Elgoglide sliding contact surface, with Zinc plating for corrosion resistance. Rod Eye 50mm diameter. Designation: GAR50 UK-2RS..
View Product

Pace Scientific Temperature Sensors

A selection of temperature probes designed specifically for use with the Pace Scientific XR440 & XR5 data loggers. Each probe will connect directly to the input channels and requires no external power. The XR5 will accept up to 8 probes and the XR440 up to 4. All temperature probes utilise..
View Product
Pace Scientific Thermocouple/mV Input Module

Pace Scientific Thermocouple/Millivolt Modules

Mvt modules enable the XR440 and XR450 Data Loggers to accept a millivolt or thermocouple input on channel 3. The Mvt-20u, Mvt-100u, Mvt-107b and Mvt-500u are used solely for mV inputs but three modules (Mvt-11b, Mvt-22b, Mvt-50u) can be used for mV or thermocouple inputs (Type J, K, N, R,..
View Product

PB-5008-1M5

Intrinsically Safe Thermistor Probe intended to be used with the TGIS-0020 datalogger, but will work with the Ultra, Plus 2 and View loggers. The stainless steel probe is 150mm long and 5mm in diameter with a 1.5m cable. Temperature range -40 to 125 C with a 15 second response time..
View Product

PB-5008-3M

Intrinsically Safe Thermistor Probe intended to be used with the TGIS-0020 datalogger, but will work with the Ultra, Plus 2 and View loggers. The stainless steel probe is 150mm long and 5mm in diameter with a 3m cable. Temperature range -40 to 125 C with a 15 second response time..
View Product

PB-5008-5M

Intrinsically Safe Thermistor Probe intended to be used with the TGIS-0020 datalogger, but will work with the Ultra, Plus 2 and View loggers. The stainless steel probe is 150mm long and 5mm in diameter with a 5m cable. Temperature range -40 to 125 C with a 15 second response time..
View Product

PBC-0001-0M2

1m Long Thermistor Probe with moulded handle and connector (IP68 rated). The stainless steel probe is 1m long and 5mm in diameter with a 2m cable. Temperature range -40 to 125 C with a 20 second response time in water.
Discontinued, equivalent PB-5013-XM..
View Product

PBC-0002-3M

Transport Thermistor Probe with a fully moulded construction (IP68 rated). The TPE (Green) sensor probe comes with a 3m cable and has a response time of 45 secondsto better mimic product temperatures. Temperature range -40 to 125 C.
Discontinued, equivalent PB-5015..
View Product

PBRF-5001-1M5

Standard Thermistor Probe with moulded handle and rugged 5-pin connector (IP68 rated) for use with Tinytag Radio units. The stainless steel probe is 150mm long and 5mm in diameter with a 1.5m cable. Temperature range -40 to 125 C with a 15 second response time in water...
View Product

PBRF-5002-1M5

Fast Response Thermistor Probe with moulded handle and rugged 5-pin connector (IP68 rated) for use with Tinytag Radio units. The stainless steel probe is 100mm long and 3.3mm in diameter with a 1.5m cable. Temperature range -40 to 125 C with a 10 second response time in water...
View Product

PBRF-5003-1M5

Surface Thermistor Probe with moulded handle and rugged 5-pin connector (IP68 rated) for use with Tinytag Radio units. The silicon sensor adheres directly to the surface with a 1.5m cable. Temperature range -40 to 125 C with a 30 second response time in water...
View Product

PBRF-5006-1M5

Flexible Thermistor Probe with a flexible fully waterproof probe and rugged 5-pin connector (IP68 rated) for use with Tinytag Radio units. Temperature range -40 to 125 C with a 12 second response time in water...
View Product

PBRF-7002-1M5

Standard PT1000 probe with a rugged 5-pin connector (IP68 rated) for use with Tinytag Radio Logger. The stainless steel probe is 150mm long and 5mm in diameter with a 1.5m cable. Temperature range -200 to +200 C (tip) with a 15 second response time in water...
View Product

PBRF-7003-1M5

PT1000 Freezer probe with a rugged 5-pin connector (IP68 rated) for use with Tinytag Radio Logger. The stainless steel probe is 50mm long and 6mm in diameter with a 1.5m cable. Suitable for temperatures down to -80 C with a 20 second response time in water...
View Product
Previous Page1 … Page5 Next

PA1508

8 inputs and 8 outputs, 24V, optically isolated, isolation between all input channels, high-side driver outputs 500 mA, for each channel, watchdog, short-circuit protection ...
View Product

PA1700-2

High-speed 3-channel (32-bit) or 6-channel (16-bit) pulse acquisition for incremental encoders, TTL or differential counter inputs for pulse width or frequency measurement, detection of line break ...
View Product

PA2000

32 optically isolated digital outputs, 24 V, high-side driver outputs 500 mA, timer, watchdog, short-circuit protection ...
View Product

PA302-16

A/D converter,16 single-ended or 8 diff. inputs, 12-bit, 125 kHz, timer, with amplifier, filter and current inputs ...
View Product

PA33X/81601.25-1360BAR-4-RS485-UNF/LH-INC

Keller Series 33 Subsea Transmitter. Range 0-1360 Bar sealed gauge with ¼-28UNF-2A Male Left Hand Autoclav male thread . With 4-20mA output, total error band 0.10% and RS485 output, total error band 0.05%. Subsea housing, external case pressure 400 Bar, with 5 pole MCBH5M miniature subcon connector. Pin 1 GND/Output, Pin 2 N/C, Pin 3 +VCC Pin 4 RS485 A, Pin 5 RS485 B. Construction Inconel and Hastelloy. ...
View Product

PA33XEI-300

PA33X pressure transmitter, 0 - 300 barG, 4-20mA & RS485 O/P, I.S. ...
View Product

Pace AC Current & AC Voltage Sensors

Self powered AC current and AC voltage sensors. Easy to install and work with a large range of data loggers and monitoring systems including the Pace XR5 and XR440 range. The SC Series of split core current sensors are available with a 0-5vDC output and cover current ranges up to 1,500A. The AC voltage sensors cover voltage ranges of 0-300vAC and 0-600vAC, both are self powered and generate a 0-5vDC output. ...
View Product
3G LogBox Connect Data Logger

8813006000

LogBox Connect 3G Data Logger. 2 Universal analogue, one digital input, plus single NPN output. Thermocouples (Type J, K, T, N, E, R, S or B) PT100, 0-50mV, 0-5V, 0-10V, 0-20mA, 4-20mA. Internal sensors: Battery voltage and external power supply. Internal memory 140,000 readings with 15 bit resolution and 1 sec to 12 hours logging interval. 10 alarms (Send via SMS). USB and 3G communications (NXperience software and Novus Cloud account). Power supply: 10-30vDC, plus ...
View Product
HC2A-S3H Meteorological Temp/RH Probe with Calibration

HC2A-S3H

High Accuracy Meteorological Temperature and Relative Humidity Probe with UKAS Calibration. Temperature Range: -50 to +100°C and Humidity 0-100%. Accuracy: ±0.1°C and ±0.5%RH, adjustments at 23 °C and 10, 20, 30, 40, 50, 60, 70, 80, 90 %RH. Outputs: 0-1V. Comes with a white Polycarbonate housing and a white Polyethylene (40µm) filter. Sensor Element: Hygromer HT-1. Ideal for high accuracy portable measurements in open spaces, warehouses, museums or factory floors. Max wind speed 20m/s. Supplied ...
View Product

Pace Relative Humidity, Temperature and Light Probes

Measure temperature and humidity with your XR440 and XR5 data logger. These probes need no external power and are ideal for indoor and outdoor (with shield) measurements. Uses two channels, one for temperature and the other for humidity. You can convert your reading to wet bulb or dew point measurements via the supplied logging software ...
View Product

RODENDM45X3.0

Rod End Bearing to align extraneous forces through the principle axis of a load cell. M45 x 3.0 Male Right-hand Thread Construction: Hard Chromium/PTFE composite/Elgoglide sliding contact surface, with Zinc plating for corrosion resistance. Rod Eye 50mm diameter. Designation: GAR50 UK-2RS ...
View Product

Pace Scientific Temperature Sensors

A selection of temperature probes designed specifically for use with the Pace Scientific XR440 & XR5 data loggers. Each probe will connect directly to the input channels and requires no external power. The XR5 will accept up to 8 probes and the XR440 up to 4. All temperature probes utilise a precision 30k Ohm thermistor and cables can be extended to over 30m without affecting the accuracy. Pace loggers will also accept thermocouples, but this ...
View Product
Pace Scientific Thermocouple/mV Input Module

Pace Scientific Thermocouple/Millivolt Modules

Mvt modules enable the XR440 and XR450 Data Loggers to accept a millivolt or thermocouple input on channel 3. The Mvt-20u, Mvt-100u, Mvt-107b and Mvt-500u are used solely for mV inputs but three modules (Mvt-11b, Mvt-22b, Mvt-50u) can be used for mV or thermocouple inputs (Type J, K, N, R, S, T, B, C, or E). A built-in precision thermistor on channel 1 provides ambient temperature readings and thermocouple cold junction compensation. An Mvt module ...
View Product

PB-5008-1M5

Intrinsically Safe Thermistor Probe intended to be used with the TGIS-0020 datalogger, but will work with the Ultra, Plus 2 and View loggers. The stainless steel probe is 150mm long and 5mm in diameter with a 1.5m cable. Temperature range -40 to 125 C with a 15 second response time in water. ...
View Product

PB-5008-3M

Intrinsically Safe Thermistor Probe intended to be used with the TGIS-0020 datalogger, but will work with the Ultra, Plus 2 and View loggers. The stainless steel probe is 150mm long and 5mm in diameter with a 3m cable. Temperature range -40 to 125 C with a 15 second response time in water. ...
View Product

PB-5008-5M

Intrinsically Safe Thermistor Probe intended to be used with the TGIS-0020 datalogger, but will work with the Ultra, Plus 2 and View loggers. The stainless steel probe is 150mm long and 5mm in diameter with a 5m cable. Temperature range -40 to 125 C with a 15 second response time in water. ...
View Product

PBC-0001-0M2

1m Long Thermistor Probe with moulded handle and connector (IP68 rated). The stainless steel probe is 1m long and 5mm in diameter with a 2m cable. Temperature range -40 to 125 C with a 20 second response time in water.
Discontinued, equivalent PB-5013-XM ...
View Product

PBC-0002-3M

Transport Thermistor Probe with a fully moulded construction (IP68 rated). The TPE (Green) sensor probe comes with a 3m cable and has a response time of 45 secondsto better mimic product temperatures. Temperature range -40 to 125 C.
Discontinued, equivalent PB-5015 ...
View Product

PBRF-5001-1M5

Standard Thermistor Probe with moulded handle and rugged 5-pin connector (IP68 rated) for use with Tinytag Radio units. The stainless steel probe is 150mm long and 5mm in diameter with a 1.5m cable. Temperature range -40 to 125 C with a 15 second response time in water. ...
View Product

PBRF-5002-1M5

Fast Response Thermistor Probe with moulded handle and rugged 5-pin connector (IP68 rated) for use with Tinytag Radio units. The stainless steel probe is 100mm long and 3.3mm in diameter with a 1.5m cable. Temperature range -40 to 125 C with a 10 second response time in water. ...
View Product

PBRF-5003-1M5

Surface Thermistor Probe with moulded handle and rugged 5-pin connector (IP68 rated) for use with Tinytag Radio units. The silicon sensor adheres directly to the surface with a 1.5m cable. Temperature range -40 to 125 C with a 30 second response time in water. ...
View Product

PBRF-5006-1M5

Flexible Thermistor Probe with a flexible fully waterproof probe and rugged 5-pin connector (IP68 rated) for use with Tinytag Radio units. Temperature range -40 to 125 C with a 12 second response time in water. ...
View Product

PBRF-7002-1M5

Standard PT1000 probe with a rugged 5-pin connector (IP68 rated) for use with Tinytag Radio Logger. The stainless steel probe is 150mm long and 5mm in diameter with a 1.5m cable. Temperature range -200 to +200 C (tip) with a 15 second response time in water. ...
View Product

PBRF-7003-1M5

PT1000 Freezer probe with a rugged 5-pin connector (IP68 rated) for use with Tinytag Radio Logger. The stainless steel probe is 50mm long and 6mm in diameter with a 1.5m cable. Suitable for temperatures down to -80 C with a 20 second response time in water. ...
View Product

PA1508

8 inputs and 8 outputs, 24V, optically isolated, isolation between all input channels, high-side driver outputs 500 mA, for each channel, watchdog, short-circuit protection..
View Product

PA1700-2

High-speed 3-channel (32-bit) or 6-channel (16-bit) pulse acquisition for incremental encoders, TTL or differential counter inputs for pulse width or frequency measurement, detection of line break..
View Product

PA2000

32 optically isolated digital outputs, 24 V, high-side driver outputs 500 mA, timer, watchdog, short-circuit protection..
View Product

PA302-16

A/D converter,16 single-ended or 8 diff. inputs, 12-bit, 125 kHz, timer, with amplifier, filter and current inputs..
View Product

PA33X/81601.25-1360BAR-4-RS485-UNF/LH-INC

Keller Series 33 Subsea Transmitter. Range 0-1360 Bar sealed gauge with ¼-28UNF-2A Male Left Hand Autoclav male thread . With 4-20mA output, total error band 0.10% and RS485 output, total error band 0.05%. Subsea housing, external case pressure 400 Bar, with 5 pole MCBH5M miniature subcon connector. Pin 1 GND/Output,..
View Product

PA33XEI-300

PA33X pressure transmitter, 0 - 300 barG, 4-20mA & RS485 O/P, I.S...
View Product

Pace AC Current & AC Voltage Sensors

Self powered AC current and AC voltage sensors. Easy to install and work with a large range of data loggers and monitoring systems including the Pace XR5 and XR440 range. The SC Series of split core current sensors are available with a 0-5vDC output and cover current ranges up to..
View Product
3G LogBox Connect Data Logger

8813006000

LogBox Connect 3G Data Logger. 2 Universal analogue, one digital input, plus single NPN output. Thermocouples (Type J, K, T, N, E, R, S or B) PT100, 0-50mV, 0-5V, 0-10V, 0-20mA, 4-20mA. Internal sensors: Battery voltage and external power supply. Internal memory 140,000 readings with 15 bit resolution and 1..
View Product
HC2A-S3H Meteorological Temp/RH Probe with Calibration

HC2A-S3H

High Accuracy Meteorological Temperature and Relative Humidity Probe with UKAS Calibration. Temperature Range: -50 to +100°C and Humidity 0-100%. Accuracy: ±0.1°C and ±0.5%RH, adjustments at 23 °C and 10, 20, 30, 40, 50, 60, 70, 80, 90 %RH. Outputs: 0-1V. Comes with a white Polycarbonate housing and a white Polyethylene..
View Product

Pace Relative Humidity, Temperature and Light Probes

Measure temperature and humidity with your XR440 and XR5 data logger. These probes need no external power and are ideal for indoor and outdoor (with shield) measurements. Uses two channels, one for temperature and the other for humidity. You can convert your reading to wet bulb or dew point measurements..
View Product

RODENDM45X3.0

Rod End Bearing to align extraneous forces through the principle axis of a load cell. M45 x 3.0 Male Right-hand Thread Construction: Hard Chromium/PTFE composite/Elgoglide sliding contact surface, with Zinc plating for corrosion resistance. Rod Eye 50mm diameter. Designation: GAR50 UK-2RS..
View Product

Pace Scientific Temperature Sensors

A selection of temperature probes designed specifically for use with the Pace Scientific XR440 & XR5 data loggers. Each probe will connect directly to the input channels and requires no external power. The XR5 will accept up to 8 probes and the XR440 up to 4. All temperature probes utilise..
View Product
Pace Scientific Thermocouple/mV Input Module

Pace Scientific Thermocouple/Millivolt Modules

Mvt modules enable the XR440 and XR450 Data Loggers to accept a millivolt or thermocouple input on channel 3. The Mvt-20u, Mvt-100u, Mvt-107b and Mvt-500u are used solely for mV inputs but three modules (Mvt-11b, Mvt-22b, Mvt-50u) can be used for mV or thermocouple inputs (Type J, K, N, R,..
View Product

PB-5008-1M5

Intrinsically Safe Thermistor Probe intended to be used with the TGIS-0020 datalogger, but will work with the Ultra, Plus 2 and View loggers. The stainless steel probe is 150mm long and 5mm in diameter with a 1.5m cable. Temperature range -40 to 125 C with a 15 second response time..
View Product

PB-5008-3M

Intrinsically Safe Thermistor Probe intended to be used with the TGIS-0020 datalogger, but will work with the Ultra, Plus 2 and View loggers. The stainless steel probe is 150mm long and 5mm in diameter with a 3m cable. Temperature range -40 to 125 C with a 15 second response time..
View Product

PB-5008-5M

Intrinsically Safe Thermistor Probe intended to be used with the TGIS-0020 datalogger, but will work with the Ultra, Plus 2 and View loggers. The stainless steel probe is 150mm long and 5mm in diameter with a 5m cable. Temperature range -40 to 125 C with a 15 second response time..
View Product

PBC-0001-0M2

1m Long Thermistor Probe with moulded handle and connector (IP68 rated). The stainless steel probe is 1m long and 5mm in diameter with a 2m cable. Temperature range -40 to 125 C with a 20 second response time in water.
Discontinued, equivalent PB-5013-XM..
View Product

PBC-0002-3M

Transport Thermistor Probe with a fully moulded construction (IP68 rated). The TPE (Green) sensor probe comes with a 3m cable and has a response time of 45 secondsto better mimic product temperatures. Temperature range -40 to 125 C.
Discontinued, equivalent PB-5015..
View Product

PBRF-5001-1M5

Standard Thermistor Probe with moulded handle and rugged 5-pin connector (IP68 rated) for use with Tinytag Radio units. The stainless steel probe is 150mm long and 5mm in diameter with a 1.5m cable. Temperature range -40 to 125 C with a 15 second response time in water...
View Product

PBRF-5002-1M5

Fast Response Thermistor Probe with moulded handle and rugged 5-pin connector (IP68 rated) for use with Tinytag Radio units. The stainless steel probe is 100mm long and 3.3mm in diameter with a 1.5m cable. Temperature range -40 to 125 C with a 10 second response time in water...
View Product

PBRF-5003-1M5

Surface Thermistor Probe with moulded handle and rugged 5-pin connector (IP68 rated) for use with Tinytag Radio units. The silicon sensor adheres directly to the surface with a 1.5m cable. Temperature range -40 to 125 C with a 30 second response time in water...
View Product

PBRF-5006-1M5

Flexible Thermistor Probe with a flexible fully waterproof probe and rugged 5-pin connector (IP68 rated) for use with Tinytag Radio units. Temperature range -40 to 125 C with a 12 second response time in water...
View Product

PBRF-7002-1M5

Standard PT1000 probe with a rugged 5-pin connector (IP68 rated) for use with Tinytag Radio Logger. The stainless steel probe is 150mm long and 5mm in diameter with a 1.5m cable. Temperature range -200 to +200 C (tip) with a 15 second response time in water...
View Product

PBRF-7003-1M5

PT1000 Freezer probe with a rugged 5-pin connector (IP68 rated) for use with Tinytag Radio Logger. The stainless steel probe is 50mm long and 6mm in diameter with a 1.5m cable. Suitable for temperatures down to -80 C with a 20 second response time in water...
View Product

CONTACT US

8:30am to 5pm Monday to Thursday
8:30am to 3pm on Friday.

  • +44 (0) 1382 443000
  • info@omni.uk.com

A real person will answer the phone and deal with your enquiry.
You can also click the button below and fill in our online enquiry form.

Technical Sales

links

  • About
  • Contact
  • Custom Systems
  • Privacy & Cookies
  • Terms & Conditions

omni instruments

Omni Instruments Ltd,
Unit 1, 14 Nobel Road,
Wester Gourdie Industrial Estate,
Dundee, DD2 4UH, UK

Sales & Support

  • +44 (0) 1382 443000
  • info@omni.uk.com

Payments

mastercard-color
visa-color
amex-color
Copyright Omni Instruments 2026 | Design. Build. Host.

        We are here to help

        Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

        Call us on +44 (0)1382 443000