6797359
19" 6U Wall-Mounted Metal Enclosure for MX52. IP55, with window door...
794079
Spectrex USB/RS485 Harness Converter Kit. RS485 to USB converter, together with SPECTREX host software, enables the user to connect to any available PC or laptop to reconfigure settings and perform diagnostics on the Quasar 900 Series Gas Detectors and all 20/20 and 40/40 Series Flame Detectors...
808-017
M8 - U-bolt with a 50mm arc diameter. Order 4 per mounting kit...
830-205
Protective PVC boot, suitable for all MicroCal simulators...
830-258
Protective Black Silicone Boot incorporating a built in stand and magnet to aid storage/display. Suitable for the 9200 series pressure manometers...
8806000410
TxBlock-USB Program. 2-Wire Temp. Transmitter, head mount 4-20mA output. Programmable input: thermocouples type J,K,T,N,E,R,S,B, and PT100, PT1000 and NTC RTD, 2-wire loop powered 4-20mA or 20-4mA output. 2, 3 or 4-wire PT100 input with linearisation output. Accuracy: 0.2% full scale for PT100, mV and 0.15% (±1°C) thermocouples. ±0.7% NTC Working..
8813001001
LogBox-DA IP65 Data Logger, 1 Analogue (0-50mV 0-10v and 4-20mA inputs) & 1 Digital input for pulse inputs (NPN or PNP up to 4 KHz) or dry contact (up to 20 Hz), with 64,000 reading memory, battery life up to 3 years. Sensor external power switch. External connection via IP65..
888263
Quasar 900 Series Stainless Steel Sunshade...
951-030
Non Isolated Amplifier / Signal convertor for use with the Dissolved Oxygen electrode. Unit to be calibrated with sensor...
BATT-12V-4AH-LP
Tracer Lithium Polymer (LiPo) rechargeable battery pack, 12V @ 4Ah. Operating temperature -10 to +60°C. Run time: 45 mins @ 50W. Recharge time: 2-3 Hrs with 1.65A charger. Life: 300+ cycles. Dimensions: 76 x 115 x 32mm, weight 360g. Battery Pack comes supplied with a Neoprene carry case, 12V cigar..
CA-12/23
Purpose designed Stainless Steel brackets for mounting your own single length pole to a flat surface. Suitable for Rutland 504 Windcharger..
CLAN-1205-XF
cLAN Ethernet Data Logger. 1 RS232 and 1 RS485/RS422 Ports for connecting serial devices to embedded Modbus Master for I/O Expansion, NMEA0138 or Gill Instruments WindSonics and MetPak weather stations or as a transparent serial port. Event logging and Real Time Clock. Power Supply 10 to 30vDC. Dimensions: 22.5 x..
DC-DC-CONV-18-36VIN-12VOUT
SD-15B-12 DC to DC converter. Input Voltage: 18-36vDC. Output Voltage 12vDC @ 15 Watts. Dimensions: 78 x 51 x 28mm. Panel mounted enclosure with short circuit, overload and over-voltage protection...
DPA
The Duct Probe Adjustment Flange plate with compression fitting for AV-DSP, AV-622 or AV-D Flow Transmitters, RH-622, RH-D Humidity Transmitters, or MiniAir and MiniWater Probes...
DTI-EMF-HART
RS485 Output Replaced by HART Protocol Output on DTI-EMF Electromagnetic Flow Meter..
EA-PADS
50 Textile Pads for HygroClip Probe Calibration Devices. Humidity Standard should be poured onto this absorbent textile pad that is placed into the screw-on lid of Rotronic Calibration Devices. HygroClip probe can then be calibrated or adjusted by comparison with the reference value of the chosen humidity standard...
EA35-SCS
35% RH Calibration Standard, Quantity 5 Ampoules. Pack also includes 5 Textile Pads...
EA50-SCS
50% RH Calibration Standard, Quantity 5 Ampoules. Pack also includes 5 Textile Pads...
EA80-SCS
80% RH Calibration Standard, Quantity 5 Ampoules. Pack also includes 5 Textile Pads...
EDM15/15
EDM15/15 Calibration Device for two 14/15mm Diameter Rotronic Probes. Requires Humidity Standards and textile pads...
EGS
EGS Calibration device for Sword Probes. Requires Humidity Standards and textile pads...
EMV-25
EMV-25 Calibration Device for vertical calibration of 25mm Diameter Rotronic Probes. Requires Humidity Standards and textile pads...
ER-05
ER-05 Calibration Device for 4/5mm Diameter Rotronic Probes. Requires Humidity Standards and textile pads...
ER-12K
ER-12K Calibration Device for 12mm Diameter Rotronic Probes. Requires Humidity Standards and textile pads...
