Skip to content

omni instruments | sensors and data acquisition equipment

Omni Instruments Ltd

Sales & Technical Support

  • +44 (0) 1382 443000
  • info@omni.uk.com
Omni Instruments Ltd
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
Products
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
Need Help?
£0.00 0 Basket
Product
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
£0.00 0 Basket

Products

Home / Products
  • Grid View
  • List View

95.0271

MiniAir20, Revolutions probe for a 0-9999 RPM range. Probe head dimensions 13 x 40/45mm and probe length 180mm...
View Product

95.0272

HygroAir temperature and humidity probe for ThermoAir3 and ManoAir500. Range -20 to +60°C (±0.5°C Accuracy) and 0-99% RH (±3%RH Accuracy). Probe head dimensions 22 x 32mm and probe length 195mm...
View Product

EX-2000/LITE-30M

30m Extension Cable.suitable for AP-LITE and AP-2000 Probes, complete with AquaConn connectors. Connectors are suitable for 10m submersion..
View Product
LEO2Ei Digital Manometer

LEO2EI-700BAR-1/4″BSP

LEO 2Ei Digital Manometer with digital display. Pressure range 0 to 700 Bar with 200mBar resolution and 0.1%FS accuracy. Peak reading function and selectable engineering units. Internal battery for up to 1,000 hours continuous operation. Pressure connection: Stainless Steel 7/16"-20 UNF male connection with ¼" BSP swivel adapter. Certified ATEX..
View Product
RTR507BL Wireless Temperature & Humidity High Accuracy Data Logger and Large Battery Pack

RTR507BL

RTR507BL Remote Data Logger with high precision temperature and humidity sensor, Ref SHB-3101, and Large Battery Pack. Temperature Range: -25 to +70°C, Accuracy ±0.3°C (0 to +55°C), Resolution 0.1°C. Humidity Range: 0-99%RH, Accuracy ±2.5%RH (at 25°C), Resolution 0.1%RH. Response Time 7 mins (t90% in air). Internal Memory 16,000 Readings (8,000..
View Product
Pitot Tube

SW10026.1

Brass Nickeled Pitot Tube for measuring static and dynamic pressure in air flows. 8mm diameter tube with 800mm probe length. Suitable for temperatures up to 350°C..
View Product
TX2-1G011 Tango TX2 Gas Detector for CO & CO/H2 Low

TX2-1G011

Tango TX2 Two Gas Detector for Carbon Monoxide (CO), Range 0-1000 ppm in 1ppm increments & Carbon Monoxide (CO/H2 Low), Range 0-1,000 ppm in 1ppm increments (Two electrodes and a special catalyst with a lower sensitivity to Hydrogen). Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for..
View Product

95.0273

ManoAir500 universal high temperature probe, range -20 to 600°C, accuracy ±1°C, head dim 3 x 230mm, shaft diameter 22mm access opening 4 mm, probe length 350mm, with 1.8 metres of cable...
View Product

95.0275

ThermoAir3, Hot Wire Directional anemometer probe. Range 0.015 - 1 m/s, accuracy +/-1% of full scale, 1.5% of reading. Probe diameter sensing head 8mm, shaft 15mm, probe length 300mm, 1.5 metres of cable..
View Product

95.0277

ThermoAir3, Hot Wire Directional anemometer probe. Range 0.015 - 5 m/s, accuracy +/-0.2% of full scale, 1.5% of reading. Probe diameter sensing head 8mm, shaft 15mm, probe length 300mm, 1.5 metres of cable..
View Product

95.0279

ThermoAir3, Hot Wire Omni-Directional anemometer probe. Range 0.015 - 1 m/s, accuracy +/-1% of full scale, 1.5% of reading. Probe diameter protection basket 110mm, sensing head 8mm, shaft 15mm, probe length 300mm, 1.5 metres of cable..
View Product

95.0281

ThermoAir3, Hot Wire Omni-Directional anemometer probe. Range 0.015 - 5 m/s, accuracy +/-0.2% of full scale, 1.5% of reading. Probe diameter protection basket 110mm, sensing head 8mm, shaft 15mm, probe length 300mm, 1.5 metres of cable..
View Product
Pitot Tube

SW10026.8

Brass Nickeled Pitot Tube for measuring static and dynamic pressure in air flows. 10mm diameter tube with 1,000mm probe length. Suitable for temperatures up to 350°C..
View Product
TX2-24011 Tango TX2 Gas Detector for H2S & NO2

TX2-24011

Tango TX2 Two Gas Detector for Hydrogen Sulphide (H2S) range 0-200 ppm in 0.1ppm increments & Nitrogen Dioxide (NO2), Range 0-150 ppm in 0.1ppm increments. Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for 3 months at 10 second interval plus 60 alarm events. The replaceable internal..
View Product
Pitot Tube

SW10026.7

Brass Nickeled Pitot Tube for measuring static and dynamic pressure in air flows. 10mm diameter tube with 1,500mm probe length. Suitable for temperatures up to 350°C..
View Product
TX2-25011 Tango TX2 Gas Detector for H2S & SO2

TX2-25011

Tango TX2 Two Gas Detector for Hydrogen Sulphide (H2S) range 0-200 ppm in 0.1ppm increments & Sulphur Dioxide (SO2), Range 0-150 ppm in 0.1ppm increments. Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for 3 months at 10 second interval plus 60 alarm events. The replaceable internal..
View Product
TX2-2G011 Tango TX2 Gas Detector for H2S & CO/H2 Low

TX2-2G011

Tango TX2 Two Gas Detector for Hydrogen Sulphide (H2S) range 0-200 ppm in 0.1ppm increments & Carbon Monoxide (CO/H2 Low), Range 0-1,000 ppm in 1ppm increments (Two electrodes and a special catalyst with a lower sensitivity to Hydrogen). Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for..
View Product
TX2-45011 Tango TX2 Gas Detector for NO2 & SO2

TX2-45011

Tango TX2 Two Gas Detector for Nitrogen Dioxide (NO2) range 0-150 ppm in 0.1ppm increments & Sulphur Dioxide (SO2), Range 0-150 ppm in 0.1ppm increments. Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for 3 months at 10 second interval plus 60 alarm events. The replaceable internal..
View Product
SNAPHD252

95.0400

Replacement MiniAir Mini snap head with an air velocity range of 20m/s with a Steel turbine. Sensing head 22mm diameter x 28mm. Suitable for use with the following MiniAir probe part numbers: MIEX202252, MIEX06252, MIEX64252, 95.0378, 93.0864...
View Product
SNAPHD254

95.0401

Replacement MiniAir Mini snap head with an air velocity range of 40 m/s with a Steel turbine. Sensing head 22mm diameter x 28mm. Suitable for use with the following MiniAir probe part numbers: MIEX202254, MIEX06254, MIEX64254, 95.0379, 93.0867...
View Product
SNAPHD262 Macro Steel Anemometer

95.0402

Replacement MiniAir Macro snap head with an air velocity range of 20 m/s with a Steel turbine. Sensing head 85mm diameter x 80mm. Suitable for use with the following MiniAir probe part numbers: MIEX202262, MIEX06262, MIEX64262, 95.0380, 93.1044...
View Product
SNAPHD264 Macro Steel Anemometer

95.0403

Replacement MiniAir Macro snap head with an air velocity range of 40 m/s with a Steel turbine. Sensing head 85mm diameter x 80mm. Suitable for use with the following MiniAir probe part numbers: MIEX202264, MIEX06264, MIEX64264...
View Product
TX2-4G011 Tango TX2 Gas Detector for NO2 & CO/H2 Low

TX2-4G011

Tango TX2 Two Gas Detector for Nitrogen Dioxide (NO2) range 0-150 ppm in 0.1ppm increments & Carbon Monoxide (CO/H2 Low), Range 0-1,000 ppm in 1ppm increments (Two electrodes and a special catalyst with a lower sensitivity to Hydrogen). Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for..
View Product

95.2032

MiniAirJunior Mini, EEX probe anemometer, air velocity range 0.3 - 20 m/s, accuracy +/- 1% of full scale, 3% of reading, head dim 22 x 28mm, access opening 35 mm, probe length 175mm, with 1.5 metres of cable. vane and Handle in steel..
View Product
Previous Page1 … Page5 Next

95.0271

MiniAir20, Revolutions probe for a 0-9999 RPM range. Probe head dimensions 13 x 40/45mm and probe length 180mm. ...
View Product

95.0272

HygroAir temperature and humidity probe for ThermoAir3 and ManoAir500. Range -20 to +60°C (±0.5°C Accuracy) and 0-99% RH (±3%RH Accuracy). Probe head dimensions 22 x 32mm and probe length 195mm. ...
View Product

EX-2000/LITE-30M

30m Extension Cable.suitable for AP-LITE and AP-2000 Probes, complete with AquaConn connectors. Connectors are suitable for 10m submersion ...
View Product
LEO2Ei Digital Manometer

LEO2EI-700BAR-1/4″BSP

LEO 2Ei Digital Manometer with digital display. Pressure range 0 to 700 Bar with 200mBar resolution and 0.1%FS accuracy. Peak reading function and selectable engineering units. Internal battery for up to 1,000 hours continuous operation. Pressure connection: Stainless Steel 7/16"-20 UNF male connection with ¼" BSP swivel adapter. Certified ATEX approved for intrinsic safety. ...
View Product
RTR507BL Wireless Temperature & Humidity High Accuracy Data Logger and Large Battery Pack

RTR507BL

RTR507BL Remote Data Logger with high precision temperature and humidity sensor, Ref SHB-3101, and Large Battery Pack. Temperature Range: -25 to +70°C, Accuracy ±0.3°C (0 to +55°C), Resolution 0.1°C. Humidity Range: 0-99%RH, Accuracy ±2.5%RH (at 25°C), Resolution 0.1%RH. Response Time 7 mins (t90% in air). Internal Memory 16,000 Readings (8,000 Data Sets), Logging Interval: 1, 2, 5, 10, 15, 20, 30 sec. or 1, 2, 5, 10, 15, 20, 30 or 60 min. Requires 3.6V ...
View Product
Pitot Tube

SW10026.1

Brass Nickeled Pitot Tube for measuring static and dynamic pressure in air flows. 8mm diameter tube with 800mm probe length. Suitable for temperatures up to 350°C ...
View Product
TX2-1G011 Tango TX2 Gas Detector for CO & CO/H2 Low

TX2-1G011

Tango TX2 Two Gas Detector for Carbon Monoxide (CO), Range 0-1000 ppm in 1ppm increments & Carbon Monoxide (CO/H2 Low), Range 0-1,000 ppm in 1ppm increments (Two electrodes and a special catalyst with a lower sensitivity to Hydrogen). Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for 3 months at 10 second interval plus 60 alarm events. The replaceable internal battery is suitable for up to 2 year continuous monitoring. Lightweight (126g), ...
View Product

95.0273

ManoAir500 universal high temperature probe, range -20 to 600°C, accuracy ±1°C, head dim 3 x 230mm, shaft diameter 22mm access opening 4 mm, probe length 350mm, with 1.8 metres of cable. ...
View Product

95.0275

ThermoAir3, Hot Wire Directional anemometer probe. Range 0.015 - 1 m/s, accuracy +/-1% of full scale, 1.5% of reading. Probe diameter sensing head 8mm, shaft 15mm, probe length 300mm, 1.5 metres of cable ...
View Product

95.0277

ThermoAir3, Hot Wire Directional anemometer probe. Range 0.015 - 5 m/s, accuracy +/-0.2% of full scale, 1.5% of reading. Probe diameter sensing head 8mm, shaft 15mm, probe length 300mm, 1.5 metres of cable ...
View Product

95.0279

ThermoAir3, Hot Wire Omni-Directional anemometer probe. Range 0.015 - 1 m/s, accuracy +/-1% of full scale, 1.5% of reading. Probe diameter protection basket 110mm, sensing head 8mm, shaft 15mm, probe length 300mm, 1.5 metres of cable ...
View Product

95.0281

ThermoAir3, Hot Wire Omni-Directional anemometer probe. Range 0.015 - 5 m/s, accuracy +/-0.2% of full scale, 1.5% of reading. Probe diameter protection basket 110mm, sensing head 8mm, shaft 15mm, probe length 300mm, 1.5 metres of cable ...
View Product
Pitot Tube

SW10026.8

Brass Nickeled Pitot Tube for measuring static and dynamic pressure in air flows. 10mm diameter tube with 1,000mm probe length. Suitable for temperatures up to 350°C ...
View Product
TX2-24011 Tango TX2 Gas Detector for H2S & NO2

TX2-24011

Tango TX2 Two Gas Detector for Hydrogen Sulphide (H2S) range 0-200 ppm in 0.1ppm increments & Nitrogen Dioxide (NO2), Range 0-150 ppm in 0.1ppm increments. Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for 3 months at 10 second interval plus 60 alarm events. The replaceable internal battery is suitable for up to 2 year continuous monitoring. Lightweight (126g), IP66 Polycarbonate housing, Dimensions 99 x 51 x 35mm. Operating temperature -40 to ...
View Product
Pitot Tube

SW10026.7

Brass Nickeled Pitot Tube for measuring static and dynamic pressure in air flows. 10mm diameter tube with 1,500mm probe length. Suitable for temperatures up to 350°C ...
View Product
TX2-25011 Tango TX2 Gas Detector for H2S & SO2

TX2-25011

Tango TX2 Two Gas Detector for Hydrogen Sulphide (H2S) range 0-200 ppm in 0.1ppm increments & Sulphur Dioxide (SO2), Range 0-150 ppm in 0.1ppm increments. Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for 3 months at 10 second interval plus 60 alarm events. The replaceable internal battery is suitable for up to 2 year continuous monitoring. Lightweight (126g), IP66 Polycarbonate housing, Dimensions 99 x 51 x 35mm. Operating temperature -40 to ...
View Product
TX2-2G011 Tango TX2 Gas Detector for H2S & CO/H2 Low

TX2-2G011

Tango TX2 Two Gas Detector for Hydrogen Sulphide (H2S) range 0-200 ppm in 0.1ppm increments & Carbon Monoxide (CO/H2 Low), Range 0-1,000 ppm in 1ppm increments (Two electrodes and a special catalyst with a lower sensitivity to Hydrogen). Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for 3 months at 10 second interval plus 60 alarm events. The replaceable internal battery is suitable for up to 2 year continuous monitoring. Lightweight (126g), ...
View Product
TX2-45011 Tango TX2 Gas Detector for NO2 & SO2

TX2-45011

Tango TX2 Two Gas Detector for Nitrogen Dioxide (NO2) range 0-150 ppm in 0.1ppm increments & Sulphur Dioxide (SO2), Range 0-150 ppm in 0.1ppm increments. Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for 3 months at 10 second interval plus 60 alarm events. The replaceable internal battery is suitable for up to 2 year continuous monitoring. Lightweight (126g), IP66 Polycarbonate housing, Dimensions 99 x 51 x 35mm. Operating temperature -40 to ...
View Product
SNAPHD252

95.0400

Replacement MiniAir Mini snap head with an air velocity range of 20m/s with a Steel turbine. Sensing head 22mm diameter x 28mm. Suitable for use with the following MiniAir probe part numbers: MIEX202252, MIEX06252, MIEX64252, 95.0378, 93.0864. ...
View Product
SNAPHD254

95.0401

Replacement MiniAir Mini snap head with an air velocity range of 40 m/s with a Steel turbine. Sensing head 22mm diameter x 28mm. Suitable for use with the following MiniAir probe part numbers: MIEX202254, MIEX06254, MIEX64254, 95.0379, 93.0867. ...
View Product
SNAPHD262 Macro Steel Anemometer

95.0402

Replacement MiniAir Macro snap head with an air velocity range of 20 m/s with a Steel turbine. Sensing head 85mm diameter x 80mm. Suitable for use with the following MiniAir probe part numbers: MIEX202262, MIEX06262, MIEX64262, 95.0380, 93.1044. ...
View Product
SNAPHD264 Macro Steel Anemometer

95.0403

Replacement MiniAir Macro snap head with an air velocity range of 40 m/s with a Steel turbine. Sensing head 85mm diameter x 80mm. Suitable for use with the following MiniAir probe part numbers: MIEX202264, MIEX06264, MIEX64264. ...
View Product
TX2-4G011 Tango TX2 Gas Detector for NO2 & CO/H2 Low

TX2-4G011

Tango TX2 Two Gas Detector for Nitrogen Dioxide (NO2) range 0-150 ppm in 0.1ppm increments & Carbon Monoxide (CO/H2 Low), Range 0-1,000 ppm in 1ppm increments (Two electrodes and a special catalyst with a lower sensitivity to Hydrogen). Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for 3 months at 10 second interval plus 60 alarm events. The replaceable internal battery is suitable for up to 2 year continuous monitoring. Lightweight (126g), ...
View Product

95.2032

MiniAirJunior Mini, EEX probe anemometer, air velocity range 0.3 - 20 m/s, accuracy +/- 1% of full scale, 3% of reading, head dim 22 x 28mm, access opening 35 mm, probe length 175mm, with 1.5 metres of cable. vane and Handle in steel ...
View Product

95.0271

MiniAir20, Revolutions probe for a 0-9999 RPM range. Probe head dimensions 13 x 40/45mm and probe length 180mm...
View Product

95.0272

HygroAir temperature and humidity probe for ThermoAir3 and ManoAir500. Range -20 to +60°C (±0.5°C Accuracy) and 0-99% RH (±3%RH Accuracy). Probe head dimensions 22 x 32mm and probe length 195mm...
View Product

EX-2000/LITE-30M

30m Extension Cable.suitable for AP-LITE and AP-2000 Probes, complete with AquaConn connectors. Connectors are suitable for 10m submersion..
View Product
LEO2Ei Digital Manometer

LEO2EI-700BAR-1/4″BSP

LEO 2Ei Digital Manometer with digital display. Pressure range 0 to 700 Bar with 200mBar resolution and 0.1%FS accuracy. Peak reading function and selectable engineering units. Internal battery for up to 1,000 hours continuous operation. Pressure connection: Stainless Steel 7/16"-20 UNF male connection with ¼" BSP swivel adapter. Certified ATEX..
View Product
RTR507BL Wireless Temperature & Humidity High Accuracy Data Logger and Large Battery Pack

RTR507BL

RTR507BL Remote Data Logger with high precision temperature and humidity sensor, Ref SHB-3101, and Large Battery Pack. Temperature Range: -25 to +70°C, Accuracy ±0.3°C (0 to +55°C), Resolution 0.1°C. Humidity Range: 0-99%RH, Accuracy ±2.5%RH (at 25°C), Resolution 0.1%RH. Response Time 7 mins (t90% in air). Internal Memory 16,000 Readings (8,000..
View Product
Pitot Tube

SW10026.1

Brass Nickeled Pitot Tube for measuring static and dynamic pressure in air flows. 8mm diameter tube with 800mm probe length. Suitable for temperatures up to 350°C..
View Product
TX2-1G011 Tango TX2 Gas Detector for CO & CO/H2 Low

TX2-1G011

Tango TX2 Two Gas Detector for Carbon Monoxide (CO), Range 0-1000 ppm in 1ppm increments & Carbon Monoxide (CO/H2 Low), Range 0-1,000 ppm in 1ppm increments (Two electrodes and a special catalyst with a lower sensitivity to Hydrogen). Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for..
View Product

95.0273

ManoAir500 universal high temperature probe, range -20 to 600°C, accuracy ±1°C, head dim 3 x 230mm, shaft diameter 22mm access opening 4 mm, probe length 350mm, with 1.8 metres of cable...
View Product

95.0275

ThermoAir3, Hot Wire Directional anemometer probe. Range 0.015 - 1 m/s, accuracy +/-1% of full scale, 1.5% of reading. Probe diameter sensing head 8mm, shaft 15mm, probe length 300mm, 1.5 metres of cable..
View Product

95.0277

ThermoAir3, Hot Wire Directional anemometer probe. Range 0.015 - 5 m/s, accuracy +/-0.2% of full scale, 1.5% of reading. Probe diameter sensing head 8mm, shaft 15mm, probe length 300mm, 1.5 metres of cable..
View Product

95.0279

ThermoAir3, Hot Wire Omni-Directional anemometer probe. Range 0.015 - 1 m/s, accuracy +/-1% of full scale, 1.5% of reading. Probe diameter protection basket 110mm, sensing head 8mm, shaft 15mm, probe length 300mm, 1.5 metres of cable..
View Product

95.0281

ThermoAir3, Hot Wire Omni-Directional anemometer probe. Range 0.015 - 5 m/s, accuracy +/-0.2% of full scale, 1.5% of reading. Probe diameter protection basket 110mm, sensing head 8mm, shaft 15mm, probe length 300mm, 1.5 metres of cable..
View Product
Pitot Tube

SW10026.8

Brass Nickeled Pitot Tube for measuring static and dynamic pressure in air flows. 10mm diameter tube with 1,000mm probe length. Suitable for temperatures up to 350°C..
View Product
TX2-24011 Tango TX2 Gas Detector for H2S & NO2

TX2-24011

Tango TX2 Two Gas Detector for Hydrogen Sulphide (H2S) range 0-200 ppm in 0.1ppm increments & Nitrogen Dioxide (NO2), Range 0-150 ppm in 0.1ppm increments. Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for 3 months at 10 second interval plus 60 alarm events. The replaceable internal..
View Product
Pitot Tube

SW10026.7

Brass Nickeled Pitot Tube for measuring static and dynamic pressure in air flows. 10mm diameter tube with 1,500mm probe length. Suitable for temperatures up to 350°C..
View Product
TX2-25011 Tango TX2 Gas Detector for H2S & SO2

TX2-25011

Tango TX2 Two Gas Detector for Hydrogen Sulphide (H2S) range 0-200 ppm in 0.1ppm increments & Sulphur Dioxide (SO2), Range 0-150 ppm in 0.1ppm increments. Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for 3 months at 10 second interval plus 60 alarm events. The replaceable internal..
View Product
TX2-2G011 Tango TX2 Gas Detector for H2S & CO/H2 Low

TX2-2G011

Tango TX2 Two Gas Detector for Hydrogen Sulphide (H2S) range 0-200 ppm in 0.1ppm increments & Carbon Monoxide (CO/H2 Low), Range 0-1,000 ppm in 1ppm increments (Two electrodes and a special catalyst with a lower sensitivity to Hydrogen). Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for..
View Product
TX2-45011 Tango TX2 Gas Detector for NO2 & SO2

TX2-45011

Tango TX2 Two Gas Detector for Nitrogen Dioxide (NO2) range 0-150 ppm in 0.1ppm increments & Sulphur Dioxide (SO2), Range 0-150 ppm in 0.1ppm increments. Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for 3 months at 10 second interval plus 60 alarm events. The replaceable internal..
View Product
SNAPHD252

95.0400

Replacement MiniAir Mini snap head with an air velocity range of 20m/s with a Steel turbine. Sensing head 22mm diameter x 28mm. Suitable for use with the following MiniAir probe part numbers: MIEX202252, MIEX06252, MIEX64252, 95.0378, 93.0864...
View Product
SNAPHD254

95.0401

Replacement MiniAir Mini snap head with an air velocity range of 40 m/s with a Steel turbine. Sensing head 22mm diameter x 28mm. Suitable for use with the following MiniAir probe part numbers: MIEX202254, MIEX06254, MIEX64254, 95.0379, 93.0867...
View Product
SNAPHD262 Macro Steel Anemometer

95.0402

Replacement MiniAir Macro snap head with an air velocity range of 20 m/s with a Steel turbine. Sensing head 85mm diameter x 80mm. Suitable for use with the following MiniAir probe part numbers: MIEX202262, MIEX06262, MIEX64262, 95.0380, 93.1044...
View Product
SNAPHD264 Macro Steel Anemometer

95.0403

Replacement MiniAir Macro snap head with an air velocity range of 40 m/s with a Steel turbine. Sensing head 85mm diameter x 80mm. Suitable for use with the following MiniAir probe part numbers: MIEX202264, MIEX06264, MIEX64264...
View Product
TX2-4G011 Tango TX2 Gas Detector for NO2 & CO/H2 Low

TX2-4G011

Tango TX2 Two Gas Detector for Nitrogen Dioxide (NO2) range 0-150 ppm in 0.1ppm increments & Carbon Monoxide (CO/H2 Low), Range 0-1,000 ppm in 1ppm increments (Two electrodes and a special catalyst with a lower sensitivity to Hydrogen). Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for..
View Product

95.2032

MiniAirJunior Mini, EEX probe anemometer, air velocity range 0.3 - 20 m/s, accuracy +/- 1% of full scale, 3% of reading, head dim 22 x 28mm, access opening 35 mm, probe length 175mm, with 1.5 metres of cable. vane and Handle in steel..
View Product

CONTACT US

8:30am to 5pm Monday to Thursday
8:30am to 3pm on Friday.

  • +44 (0) 1382 443000
  • info@omni.uk.com

A real person will answer the phone and deal with your enquiry.
You can also click the button below and fill in our online enquiry form.

Technical Sales

links

  • About
  • Contact
  • Custom Systems
  • Privacy & Cookies
  • Terms & Conditions

omni instruments

Omni Instruments Ltd,
Unit 1, 14 Nobel Road,
Wester Gourdie Industrial Estate,
Dundee, DD2 4UH, UK

Sales & Support

  • +44 (0) 1382 443000
  • info@omni.uk.com

Payments

mastercard-color
visa-color
amex-color
Copyright Omni Instruments 2026 | Design. Build. Host.

        We are here to help

        Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

        Call us on +44 (0)1382 443000