VM-6360-SENSOR
Replacement VM-6360 sensor with interconnecting cable...
WAVE-ANT-070
Right Angled Stub Antenna. Suitable for 850/900/1800/1900/2100MHz frequencies, with an SMA Plug..
WISENS-AXIAL-CLAMP
The WISENS-AXIAL-CLAMP is a custom moulded clamp that is designed for the 40mm housing diameter of the WiSens Underwater Loggers. It provides a secure connection that allows you to anchor your WiSens logger to a buoy or dock...
10130002
ComNav G3 GNSS Satellite with G2 Compass Differential GPS (DGPS) correction, G3 Colour Display and 30m cable. Output: NMEA0183. Update rate: Heading & position updates at up to 20 times per second, and can operate at sustained turn rates up to 90° per second. Power Supply 10 to 36vDC (250mA..
1733-PK-013
MetConnect 8-Pin M12 Connector with 10m of cable. Suitable for the MetConnect Power/Comms and additional sensors...
8804161001
RHT Climate-DM-250S-485 Duct Mounted Temperature and Relative Humidity Transmitter with 250mm Stainless Steel Probe. Two analogue outputs, configurable as 4-20mA or 0-10V for any sensor or calculated psychromatic readings. Two configurable alarm outputs and RS485 Modbus Comms. Temperature Range -40 to +100°C, Relative Humidity Range 0 to 100%RH. Power Supply..
95.0007
MiniAir20 Micro vane anemometer. Air velocity range 0.7-40m/s with accuracy ±1% of full scale, ±3% of reading. Sensing head 11mm diameter x 15mm, probe length 165mm. Sensor is supplied with 1.8m cable and connector for interfacing with MC20 and MC 4.0 Displays with Lemo Connectors. Plastic sensing head with metal..
AP-800 Aquaprobe Packages
The AP-800 Aquaprobe Packages offer a complete package. The AP-800 Aquaprobe sensor includes a sensor port for optical sensors and comes with the Turbidity sensor in the standard packages. The AP-800 Aquaprobe Package include an Aquaprobe AP-800 (including DO, EC, pH, ORP and temperature sensors), a 3 meter cable, Bluelink..
CA-12/04
Stainless steel tube pre-drilled at one end to suit a Windcharger for customers to adapt to own tower design. 600mm Length Stainless Steel Tube suitable for Rutland 914i Windcharger 600mm..
CA-12/07
Land Tower Rigging Kit. Kit consists of steel guys, shackles, turnbuckles, pole attachments, ground fixings for pole and guys. (designed for permanent installation-concrete base for pole and guy anchors recommended)..
CA-12/25
2 pack of SunWare Solar Panel Mid Fixing Clips. Suitable for fixing Sunware series 20 frameless solar modules or plates up to 3mm thickness between two panels in a solar array. Material: PUR, approx 100 shore (like hard rubber). Packs include screws 4 x (3,6 x 16mm, VA) and washers...
DO7441-T
Dissolved Oxygen sensor with a Lead anode and a Teflon membrane for low range applications. Range 0-100% saturation with a 4-20mA output. Sensors are fitted with a standard of 3m cable...
EX-2000/LITE-10M
10m Extension Cable.suitable for AP-LITE and AP-2000 Probes, complete with AquaConn connectors. Connectors are suitable for 10m submersion..
GS-CO2-S-LED
GS-CO2 Space Mounted Carbon Dioxide & Temperature Transmitter with LEDs. Non-Dispersive Infra-Red (NDIR) and temperature sensors. 3-colour LED indication: Green <1,000ppm; Amber 1,000 to 1,500ppm; Red >1,500ppm. Measurement Ranges: 0-2,000ppm & 0-40°C. Output: 2 x 4-20mA or 0-10vDC selectable. Power supply: 24vDC. IP30 Flame retardant ABS housing, dimensions 115 x..
HC2-IM105-EX
Intrinsically safe HC2 probe for EX applications with a 5m cable mounted 125mm stainless steel probe for humidity and temperature monitoring. For use with the HF5 EX series of transmitters. Ranges Temperature -40 to +60°C, Relative Humidity 0 to 100%. Accuracy 0.8%RH, 0.1°C...
LEO2EI-1-30BAR-1/4″BSP
LEO 2Ei Digital Manometer with digital display. Pressure range -1 to 30 Bar with 10mBar resolution and 0.1%FS accuracy. Peak reading function and selectable engineering units. Internal battery for up to 1,000 hours continuous operation. Pressure connection: Stainless Steel 7/16"-20 UNF male connection with ¼" BSP swivel adapter. Certified ATEX..
MIEX06374
MiniAir 6EX Micro vane anemometer. Sensing head 11mm diameter x 15mm, probe length 165mm. Air velocity range 0-40m/s with a 0-2V output. Accuracy ±1% of full scale, ±3% of reading. Power supply 9-24vDC Sensor is supplied with 20m cable to zener barrier housing. Operating range up to +140°C. Steel sensing..
PB-5015-3M
Encapsulated Thermistor Probe with a flexible fully waterproof probe with 3m cable. Temperature range -40 to 105°C with a 45 second response time in water, which provides a better reading of product temperature...
RTR502BL
RTR502BL Remote Data Logger with external thermistor sensor, Ref TR-5106, and Large Battery Pack. Measurement Range: -60 to +155°C, Accuracy ±0.3°C (-20 to +80°C), Resolution 0.1°C. Response Time 80 Secs (t90% in air). Internal Memory 16,000 Readings, Logging Interval: 1, 2, 5, 10, 15, 20, 30 sec. or 1, 2,..
SCBH4F-SS
SCBH bulkhead connector, suitable for 4000 metres WG, stainless steel with 4 female pins. This item isn't available to purchase online but is normally held in stock. You can contact us directly to check availability and pricing. info@omni.uk.com..
SW10026.3
Brass Nickeled Pitot Tube for measuring static and dynamic pressure in air flows. 5mm diameter tube with 600mm probe length. Suitable for temperatures up to 350°C..
TC-K-N3-3
Combined magnet & clamp fasteners for air and surface measurements. 3.0m PTFE Coated cable. Suitable for use with a substrate materials (ferrous, non-ferrous, plastics and composites etc.)..
TX2-14011
Tango TX2 Two Gas Detector for Carbon Monoxide (CO), Range 0-1000 ppm in 1ppm increments & Nitrogen Dioxide (NO2), Range 0-150 ppm in 0.1ppm increments. Alarms: Audible 100dB, vibration and three strobe-emitting visual LEDs. Internal logging for 3 months at 10 second interval plus 60 alarm events. The replaceable internal..
WISENS-CLAMP
The WISENS-CLAMP is a custom moulded clamp that is designed to secure around the 40mm housing diameter of the WiSens Underwater Loggers. It provides a secure connection that allows you to anchor your WiSens logger to a mooring line...
